PREN 764-4 : DRAFT 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PRESSURE EQUIPMENT - PART 4: ESTABLISHMENT OF TECHNICAL DELIVERY CONDITIONS FOR METALLIC MATERIALS
12-01-2014
01-24-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions, symbols and abbreviations
4 Types of technical delivery conditions
5 Content of technical delivery conditions for materials for
pressure equipment
Annex A (normative) - Procedures for the establishment of
European Approvals for pressure equipment Materials
(EAM)
Annex B (normative) - Appraisal schedule for ferritic and
martensitic steels
Annex C (normative) - Appraisal schedule for austenitic and
austenitic-ferritic steels
Annex D (normative) - Appraisal schedule for cast steels
Annex E (normative) - Test program for welded specimen
after stress relief procedure
Annex Y (informative) - History of EN 764-4
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of the EU
Pressure Equipment Directive 97/23/EC
Bibliography
Defines the requirements, under the regime of the EU Directive 97/23/EC on Pressure Equipment (PED), for the establishment of the technical delivery conditions in form of: - harmonised European Standards for material; - European Approval for Materials (EAM); - Particular Material Appraisal (PMA) for metallic materials for pressure equipment in all product forms.
| Committee |
TC 54
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 12/30259070 DC : 0 | Identical |
| 01/714474 DC : DRAFT NOV 2001 | BS EN 14276-1 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 1: VESSELS - GENERAL REQUIREMENTS |
| 03/302503 DC : DRAFT FEB 2003 | BS EN 14276-2 - PRESSURE EQUIPMENT FOR REFRIGERATING SYSTEMS AND HEAT PUMPS - PART 2: PIPING - GENERAL REQUIREMENTS |
| 12/30259073 DC : 0 | BS EN 764-5 - PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION |
| PREN 764-5 : DRAFT 2012 | PRESSURE EQUIPMENT - PART 5: INSPECTION DOCUMENTATION OF METALLIC MATERIALS AND COMPLIANCE WITH THE MATERIAL SPECIFICATION |
| 02/712507 DC : DRAFT OCT 2002 | EN 14585 - PRESSURISED CORRUGATED METAL HOSE ASSEMBLIES |
| 99/707166 DC : DRAFT APR 1999 | PREN 764-5 - PRESSURE EQUIPMENT - PART 5: COMPLIANCE AND INSPECTION DOCUMENTATION OF MATERIALS |
| EN 10213:2007+A1:2016 | Steel castings for pressure purposes |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO/TR 15608:2017 | Welding — Guidelines for a metallic materials grouping system |
| EN 10314:2016 | Method for the derivation of minimum values of proof strength of steel at elevated temperatures |
| EN ISO 3690:2012 | Welding and allied processes - Determination of hydrogen content in arc weld metal (ISO 3690:2012) |
| EN 764-1:2015+A1:2016 | Pressure equipment - Part 1: Vocabulary |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN ISO 204:2009 | Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009) |
| ISO 17642-3:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 3: Externally loaded tests |
| EN 895:1995 | Destructive tests on welds in metallic materials - Transverse tensile test |
| EN 764-5:2014 | Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| EN ISO 17642-1:2004 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 1: General (ISO 17642-1:2004) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| CEN ISO/TR 15608:2017 | Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2017) |
| EN ISO 6892-2:2011 | Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| EN ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004) |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 12074:2000 | Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes |
| ISO 17642-1:2004 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 1: General |
| EN ISO 17642-3:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 3: Externally loaded tests (ISO 17642-3:2005) |
| ISO 6892-2:2011 | Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
| EN 764-2:2012 | Pressure equipment - Part 2: Quantities, symbols and units |
| EN ISO 148-1:2016 | Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
| EN ISO 17642-2:2005 | Destructive tests on welds in metallic materials - Cold cracking tests for weldments - Arc welding processes - Part 2: Self-restraint tests (ISO 17642-2:2005) |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
| ISO 17642-2:2005 | Destructive tests on welds in metallic materials — Cold cracking tests for weldments — Arc welding processes — Part 2: Self-restraint tests |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.