PREN 6042 : 200P1
Current
The latest, up-to-date edition.
AEROSPACE SERIES - ORGANIC COMPOUNDS - TEST METHOD - ANALYSIS BY INFRARED SPECTROSCOPY
Hardcopy , PDF
English
11-30-1995
1 Scope
2 Normative references
3 Definitions
4 Principle of the method
5 Designation of the method
6 Apparatus
7 Test Specimen
8 Procedure
9 Presentation of the results
10 Test report
Annex A - Pellitization
Annex B - Deposit on a plate
Annex C - Deposit between two plates
Annex D - Dissolution and pellitization (Dispas)
Annex E - Total dissolution (Distot)
Annex F - Liquid cell
Annex G - Gas cell
Describes the principles applicable to infrared transmission spectrophotometric analysis of origin compounds (elastomers, basic, resins, resin mixes or resin systems) used as the matrix in reinforced polymers, adhesives, bonding primers and, in general terms, all organic compounds.
DocumentType |
Draft
|
Pages |
20
|
PublisherName |
Aerospace & Defence Industries Association of Europe
|
Status |
Current
|
Standards | Relationship |
DIN EN 6042:1996-04 (Draft) | Identical |
PREN 4689 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
PREN 6085 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - EPOXY SURFACING FILMS |
BS EN 4689:2012 | Aerospace series. Paints and varnishes. Two components cold curing polyurethane finish. High flexibility and chemical agent resistance for military application |
BS EN 4106:2013 | Aerospace series. Non-metallic materials. Structural adhesive systems. Paste adhesive. Technical specification |
UNI EN 4689 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
EN 4689:2012 | Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
SAE AMS 3970/6 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 6 - MATERIAL SPECIFICATION: CARBON FIBER FABRIC REINFORCED EPOXY PREPREG FOR REPAIR, PLAIN WEAVE FABRIC, 193 G/M[2], ADHESIVE FILM FOR REPAIR AND NON-STRUCTURAL GLASS FIBER FABRIC REINFORCED EPOXY PREPREG, 105 G/M[2] |
SAE AMS 3970/3 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 3: PURCHASING SPECIFICATION FOR CARBON PREPREG |
PREN 2833-1 : 200P2 | AEROSPACE SERIES - GLASS FIBRE THERMOSETTING PREIMPREGNATES - TECHNICAL SPECIFICATION - PART 1: GENERAL REQUIREMENTS |
PREN 2434-05 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 05: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
PREN 6044-1 : 200P1 | AEROSPACE SERIES - CARBON FIBRE REINFORCED EPOXY PREPREG - TECHNICAL SPECIFICATION - GENERAL REQUIREMENTS |
PREN 4106 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - PASTE ADHESIVE - TECHNICAL SPECIFICATION |
SAE AMS 3970/5 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 5: PURCHASING SPECIFICATION FOR COMPANION NON-STRUCTURAL GLASS FIBER FABRIC PREPREG |
UNI EN 4106 : 2014 | AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - PASTE ADHESIVE - TECHNICAL SPECIFICATION |
SAE AMS 3970/1 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 1 - GENERAL REQUIREMENTS |
SAE AMS 3970/4 : 2011 | CARBON FIBER FABRIC REPAIR PREPREG, 120 DEGREES C (250 DEGREES F) VACUUM CURING - PART 4: PURCHASING SPECIFICATION FOR FILM ADHESIVE |
17/30371344 DC : 0 | BS EN 4689 - AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
EN 2434-005:2006 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application |
EN 4106:2013 | Aerospace series - Non-metallic materials - Structural adhesive systems - Paste adhesive - Technical specification |
I.S. EN 4689:2012 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENTS COLD CURING POLYURETHANE FINISH - HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
SAE AMS 2950/1 : 2008 | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
I.S. EN 4106:2013 | AEROSPACE SERIES - NON-METALLIC MATERIALS - STRUCTURAL ADHESIVE SYSTEMS - PASTE ADHESIVE - TECHNICAL SPECIFICATION |
SAE AMS 2950/1 : 2008(R2019) | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
BS EN 2434-005 : 2006 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - PART 005: HIGH FLEXIBILITY AND CHEMICAL AGENT RESISTANCE FOR MILITARY APPLICATION |
EN 2743:2001 | Aerospace series - Fibre reinforced plastics - Standard procedures for conditioning prior to testing unaged materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.