PREN 4700-001 : 200P2
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - STEEL AND HEAT RESISTING ALLOYS - WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 001: PLATE, SHEET AND STRIP
Available format(s)
Hardcopy , PDF
Withdrawn date
12-22-2023
Superseded by
Language(s)
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
Describes the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting (Cobalt, Nickel and iron based alloys) alloy plate, sheet and strip. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
| DevelopmentNote |
Supersedes PREN 3235-1, PREN 3235-2, PREN 4235-1 and PREN 4235-2. (06/2003)
|
| DocumentType |
Draft
|
| Pages |
26
|
| ProductNote |
Superseded by EN 4700-001:2010
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 4700-001 : 2012 | Identical |
| PREN 3480 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA |
| I.S. EN 3361:2007 | AEROSPACE SERIES - STEEL FE-PM1802 (X5CRNICU15-5) - CONSUMABLE ELECTRODE REMELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - 1070 MPA <= R[M] <= 1220 MPA |
| BS EN 3525:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Plate. 6 mm ≪ a ≤ 20 mm. 1080 MPa ≤ Rm ≤ 1280 MPa |
| 10/30239363 DC : 0 | BS EN 4500-5 - AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 5: SPECIFIC RULES FOR STEELS |
| BS EN 4642:2009 | Aerospace series. Steel FE-PM 3504 (X4CrNiMo16-5-1). Air melted. Hardened and tempered. Sheet and plate. 0,6 mm ≤ a ≤ 50 mm. 900 MPa ≤ Rm ≤ 1050 MPa |
| BS EN 3488:2007 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Sheet and strip. a ≤ 6 mm. 500 MPa ≤ Rm ≤ 700 MPa |
| BS EN 4528:2009 | Aerospace series. Steel FE-PA 3903 (X10CrNi18-8). Cold rolled. Strip for springs. a ≤ 3 mm. 1250 MPa ≤ Rm ≤ 1640 MPa |
| BS EN 3329:2009 | Aerospace series. Steel FE-PL1503 (35CrMo4). Annealed Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts |
| PREN 2467 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - AIR MELTED - SOFTENED - PLATE, SHEET AND STRIP - 0,4 MM <= A <= 20 MM - 520 MPA <= R[M] <= 670 MPA |
| BS EN 3524:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 2 mm ≤ a ≤ 6 mm. 1080 MPa ≤ Rm ≤1280 MPa |
| BS EN 3526:2007 | Aerospace series. Steel FE-PL1505 (15CrMoV6). Air melted. Hardened and tempered. Sheet and strip. 0,5 mm ≤ a ≤ 6 mm. 980 MPa ≤ Rm ≤ 1180 MPa |
| PREN 3488 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - SHEET AND STRIP - A <= 6 MM - 500 MPA <= R[M] <= 700 MPA |
| I.S. EN 3162:2007 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP A <= 6 MM - R[M] >= 930 MPA |
| I.S. EN 2467:2007 | AEROSPACE SERIES - STEEL FE-PA3901 (X2CRNI18-9) - AIR MELTED - SOFTENED - PLATE, SHEET AND STRIP - 0,4 MM <= A <= 20 MM - 520 MPA <= R[M] <= 670 MPA |
| BS EN 3532:2007 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5).Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated.Plate. 6 mm < a ≤ 40 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| PREN 4528 : 200P1 | AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS A <= 3 MM 1250 MPA <= RM <= 1640 MPA |
| I.S. EN 2543:2009 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS |
| PREN 4642 : 200P1 | AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= RM <= 1050 MPA |
| I.S. EN 4528:2009 | AEROSPACE SERIES - STEEL FE-PA3903 (X10CRNI18-8) - COLD ROLLED - STRIP FOR SPRINGS - A <= 3 MM - 1250 MPA <= R[M] <= 1640 MPA |
| I.S. EN 4642:2009 | AEROSPACE SERIES - STEEL FE-PM 3504 (X4CRNIMO16-5-1) - AIR MELTED - HARDENED AND TEMPERED - SHEET AND PLATE - 0,6 MM <= A <= 50 MM - 900 MPA <= R[M] <= 1050 MPA |
| I.S. EN 2209:2008 | AEROSPACE SERIES - STEEL FE-PL1502 (25CRMO4) - 900 MPA <= R[M] <= 1100 MPA - SHEETS, STRIPS AND PLATES - 0,5 MM <= A <= 20 MM |
| I.S. EN 3488:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - SHEET AND STRIP - A <= 6 MM - 500 MPA <= R[M] <= 700 MPA |
| BS EN 3479:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1070 MPa ≤ Rm ≤ 1220 MPa |
| BS EN 3531:2007 | Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Sheet and strip. a ≤ 6 mm. 1750 MPa ≤ Rm ≤ 2000 MPa |
| BS EN 2467:2007 | Aerospace series. Steel FE-PA3901 (X2CrNi18-9). Air melted. Softened. Plate, sheet and strip. 0,4 mm ≤ a ≤ 20 mm. 520 MPa ≤ Rm ≤ 670 MPa |
| BS EN 3361:2007 | Aerospace series. Steel FE-PM1802 (X5CrNiCu15-5). Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1070 MPa ≤ Rm ≤ 1220 MPa |
| BS EN 2543:2009 | Aerospace series. Steel FE-PL1502 (25CrMo4). Annealed. Sheet and strip. 0,3 mm ≤ a ≤ 2 mm. For prevailing torque nuts |
| BS EN 2209:2008 | Aerospace series. Steel FE-PL1502 (25CrMo4). 900 MPa ≤ Rm ≤ 1100 MPa. Sheets, strips and plates. 0,5 mm ≤ a ≤ 20 mm |
| BS EN 3162:2007 | Aerospace series. Steel FE-PM3801 (X5CrNiCu17-4). Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa |
| EN 3526:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 0,5 mm ≤ a ≤ 6 mm - 980 MPa ≤ Rm ≤ 1 180 MPa |
| EN 3524:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Sheet and strip - 2 mm ≤ a ≤ 6 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 3488:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Sheet and strip - a ≤ 6 mm - 500 MPa ≤ Rm ≤ 700 MPa |
| EN 3531:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Sheet and strip - a ≤ 6 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 2543:2009 | Aerospace series - Steel FE-PL1502 (25CrMo4) - Annealed - Sheet and strip - 0,3 mm ≤ a ≤ 2 mm - For prevailing torque nuts |
| EN 2209:2008 | Aerospace series - Steel FE-PL1502 (25CrMo4) - 900 MPa ≤ Rm ≤ 1 100 MPa - Sheets, strips and plates - 0,5 mm ≤ a ≤ 20 mm |
| EN 4642:2009 | Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm ≤ a ≤ 50 mm - 900 MPa ≤ Rm ≤ 1 050 MPa |
| EN 3525:2007 | Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa |
| EN 3532:2007 | Aerospace series - Steel FE-PM2701 (X2NiCoMo18-8-5) - Vacuum induction melted and vacuum arc remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 40 mm - 1 750 MPa ≤ Rm ≤ 2 000 MPa |
| EN 2467:2007 | Aerospace series - Steel FE-PA3901 (X2CrNi18-9) - Air melted - Softened - Plate, sheet and strip - 0,4 mm ≤ a ≤ 20 mm - 520 MPa ≤ Rm ≤ 670 MPa |
| EN 3361:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted, solution treated and precipitation treated, sheet and strip a ≤ 6mm, 1 070 MPa ≤ Rm ≤ 1 220 MPa |
| EN 3479:2007 | Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Plate - 6 mm < a ≤ 20 mm - 1 070 MPa ≤ Rm ≤ 1 220 MPa |
| EN 4528:2009 | Aerospace series - Steel FE-PA3903 (X10CrNi18-8) - Cold rolled - Strip for springs - a ≤ 3 mm - 1 250 MPa ≤ Rm ≤ 1 640 MPa |
| EN 3329:2009 | Aerospace series |
| EN 3638:2007 | Aerospace series - Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15) - Consumable electrode remelted - Solution and precipitation treated - Sheet, strip and plate - 0,5 mm ≤ a ≤ 10 mm |
| EN 3816:2006 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened and cold rolled - Sheet and strip a ≤ 3 mm - Rm ≥ 800 MPa |
| EN 3162:2007 | Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted, solution treated and precipitation treated, sheet and strip a ≤ 6 mm, Rm ≥ 930 MPa |
| EN 3480:2007 | Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa |
| I.S. EN 3480:2007 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - PLATE - 6 MM < A <= 50 MM - 500 MPA <= R[M] <= 700 MPA |
| PREN 4500-005 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 005: SPECIFIC RULES FOR STEELS |
| I.S. EN 3329:2009 | AEROSPACE SERIES - STEEL FE-PL1503 (35CRMO4) - ANNEALED - SHEET AND STRIP - 0,3 MM <= A <= 2 MM - FOR PREVAILING TORQUE NUTS |
| BS EN 3638:2007 | Aerospace series. Heat resisting alloy FE-PA2601 (X6NiCrTiMoV26-15). Consumable electrode remelted. Solution and precipitation treated. Sheet, strip and plate. 0,5 mm ≤ a ≤ 10 mm |
| BS EN 3480:2007 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened. Plate. 6 mm < a ≤ 50 mm. 500 MPa ≤ Rm ≤ 700 MPa |
| BS EN 3816:2006 | Aerospace series. Steel FE-PA3601 (X6CrNiTi18-10). Air melted. Softened and cold rolled. Sheet and strip. a ≤ 3 mm. Rm ≥ 800 MPa |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| PREN 4436 : 200P1 | AEROSPACE SERIES - STEEL - TEST METHODS - DETERMINATION OF DELTA FERRITE CONTENT |
| EN 10079:2007 | Definition of steel products |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| PREN 4050-1 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION BARS, PLATES, FORGING STOCK AND FORGINGS - GENERAL INFORMATION |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
| EN 10002-5:1991 | Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature |
| PREN 2002-08 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 8: MICROGRAPHIC DETERMINATION OF GRAIN SIZE |
| PREN 2003-7 : 200P1 | AEROSPACE SERIES - STEEL - TEST METHODS - PART 7: MACROGRAPHIC TEST |
| PREN 2002-06 : 200P2 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 6: BEND TESTING |
| SAE AMS 2750 : 2012 | PYROMETRY |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| ISO 9001:2015 | Quality management systems — Requirements |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 2002-002:2005 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| PREN 4050-4 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF BARS, PLATES, FORGING STOCK AND FORGINGS - ACCEPTANCE CRITERIA |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.