PREN 4641-102 : 200P1
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 102: SEMI-LOOSE 62,5/125 [MU]M GI FIBRE NOMINAL 1,8 MM OUTSIDE DIAMETER - PRODUCT STANDARD
Available format(s)
Hardcopy , PDF
Superseded date
06-14-2024
Superseded by
Language(s)
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Required characteristics
5 Cable construction
6 Materials
7 Test methods and performances
8 Tooling
9 Quality assurance
10 Designation, marking and colours
11 Delivery conditions
12 Storage
Specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5/125 [mu]m Graded Index fibre nominal, 1,8 mm outside diameter and of semi-loose buffer construction.
| DocumentType |
Draft
|
| Pages |
12
|
| ProductNote |
Superseded by EN 4641-102:2009
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| NF EN 4641-102 : 2009 | Identical |
| DIN EN 4641-102:2009-10 | Identical |
| 06/30157460 DC : 0 | Identical |
| PREN 4640-002 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: LIST OF PRODUCT STANDARDS |
| PREN 4645-002 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| PREN 4641-104 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 104: SEMI-LOOSE, RUGGEDIZED DUPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 4,95 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4641-105 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 105: SEMI-LOOSE, RUGGEDIZED QUADRAXIAL CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL, 5,72 MM OUTSIDE DIAMETER - PRODUCT STANDARD |
| PREN 4830-002 : DRAFT 2014 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, OPERATING TEMPERATURE 125 DEGREES C, FOR EN 4639-10X CONTACTS - PART 002: SPECIFICATION OF PERFORMANCE |
| PREN 4641-103 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL 125 [MU]M DIAMETER CLADDING - PART 103: SEMI-LOOSE, RUGGEDIZED SIMPLEX CONSTRUCTION 62,5/125 [MU]M GI FIBRE NOMINAL 2,74 MM, OUTSIDE DIAMETER - PRODUCT STANDARD |
| BS EN 4639-002:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder List of product standards |
| BS EN 4639-102:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Optical contact for cable EN 4641-102. Operating temperatures between -55°C and 100°C. Product standard |
| EN 4639-102:2007 | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between - 55 °C and 100 °C - Product standard |
| EN 4639-002:2007 | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards |
| EN 4640-002:2009 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards |
| TR 4647 : 1 | AEROSPACE SERIES - TERMINATION PROCEDURE FOR EN 4639 OPTICAL CONTACT |
| I.S. EN 4640-002:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTI CONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 002: LIST OF PRODUCT STANDARDS |
| BS EN 4640-002:2009 | Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder List of product standards |
| EN 3475-703:2002 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 703: Permanence of manufacturer's marking |
| EN 3745-305:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 305: Immunity to ambient light coupling |
| SAE AMS 1428 : 2017 | FLUID, AIRCRAFT DEICING/ANTI-ICING, NON-NEWTONIAN, (PSEUDOPLASTIC), SAE TYPES 2, 3 AND 4 |
| EN 3745-512:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 512: Flexure endurance |
| PREN 2812 : 200P3 | AEROSPACE SERIES - STRIPPING OF ELECTRIC CABLES |
| EN 3745-202:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions |
| EN 3745-504:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 504: Micro bending test |
| EN 3745-509:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 509: Kink test |
| EN 3745-301:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 301: Attenuation |
| TR 4647 : 1 | AEROSPACE SERIES - TERMINATION PROCEDURE FOR EN 4639 OPTICAL CONTACT |
| MIL-PRF-87252 Revision D:2015 | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| EN 3745-404:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 404: Thermal shock |
| EN 3475-515:2009 | Aerospace series - Cable, electrical, aircraft use - Test methods - Part 515: Crush resistance |
| EN 3745-503:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 503: Scrape abrasion |
| EN 3475-602:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 602: Toxicity |
| EN 3745-411:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids |
| STANAG 3748 : 1995 | HYDRAULIC FLUIDS, PETROLEUM (H-515, H-520 AND C-635) AND POLYALPHAOLEFIN (H-537, H-538 AND H-544) |
| EN 3745-306:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 306: Variation of attenuation during temperature cycling |
| EN 3745-513:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 513: Crush resistance |
| EN 3745-100:2008 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 100: General |
| EN 3745-507:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 507: Cut-through |
| PREN 3745-514 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE TEST METHODS - PART 514: CABLE TWIST BEND |
| EN 3745-505:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength |
| EN 3745-406:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 406: Cold bend test |
| PREN 3909 : 200P3 | AEROSPACE SERIES - TEST FLUIDS FOR ELECTRICAL AND OPTICAL COMPONENTS AND SUB-ASSEMBLIES |
| EN 3745-501:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 501: Optical fibre proof test |
| EN 3475-601:2007 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 601: Smoke density |
| PREN 3745-203 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 203: CABLE DIMENSIONS |
| EN 3745-201:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 201: Visual examination |
| EN 3745-402:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 402: Temperature cycling |
| ISO 11078:2007 | Aircraft — De-icing/anti-icing fluids — ISO types II, III and IV |
| EN 3475-706:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 706: Laser markability |
| EN 2424:2008 | Aerospace series - Marking of aerospace products |
| EN 3745-412:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 412: Humidity resistance |
| PREN 4641-001 : 200P1 | AEROSPACE SERIES - CABLES, OPTICAL, 125 [MU]M DIAMETER CLADDING - PART 001: TECHNICAL SPECIFICATION |
| EN 3745-401:2005 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 401: Accelerated ageing |
| PREN 3745-506 : 200P1 | AEROSPACE SERIES - FIBRES AND CABLES, OPTICAL, AIRCRAFT USE - TEST METHODS - PART 506: IMPACT RESISTANCE |
| PREN 3475-601 : 200P2 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 601: SMOKE DENSITY |
| PREN 3838 : 200P2 | AEROSPACE SERIES - REQUIREMENTS AND TESTS ON USER-APPLIED MARKINGS ON AIRCRAFT ELECTRICAL CABLES |
| EN 3745-511:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 511: Cable to cable abrasion |
| ISO 11075:2007 | Aircraft — De-icing/anti-icing fluids — ISO type I |
| EN 3745-405:2012 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 405: Low/High temperature bend test |
| EN 3745-410:2015 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 410: Thermal life |
| EN 3745-508:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 508: Torsion |
| EN 3475-705:2005 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 705: Contrast measurement |
| EN 3475-701:2017 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 701: Strippability and adherence of insulation to the conductor |
| EN 3745-510:2017 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 510: Bending test |
| EN 3745-303:2007 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth |
| EN 3745-302:2002 | Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 302: Numerical aperture |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.