PREN 4530-001 : 200P1
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 001: TECHNICAL SPECIFICATION
Available format(s)
Hardcopy , PDF
Withdrawn date
12-19-2023
Superseded by
Language(s)
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms and definitions
4 Conditions of use and temperature classes
5 Design and description
6 Dimensions and mass
7 Operation
8 Tests
9 Quality assurance
10 Designation and marking
11 Delivery condition
12 Packaging
13 Storage
Describes: - the electrical, mechanical, environmental and dimensional characteristics of sealing sleeves used in elements of connection; - the conditions for qualification if the sealing sleeves are not tested during the connector qualification, acceptance testing and quality assurance; - the test programme and groups.
| DocumentType |
Draft
|
| Pages |
9
|
| ProductNote |
Superseded by EN 4530-001:2006
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| 02/706952 DC : DRAFT MAY 2002 | Identical |
| PREN 4530-005 : 200P1 | AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 005: SEALING SLEEVES FOR EXTERNAL DIAMETER CABLE 3 MM TO 4,1 MM - PRODUCT STANDARD |
| PREN 4530-006 : 200P1 | AEROSPACE SERIES - SEALING SLEEVES USED IN ELEMENTS OF CONNECTION - PART 006: SEALING SLEEVES FOR EXTERNAL DIAMETER CABLE 4,68 MM TO 5,05 MM - PRODUCT STANDARD |
| EN 2591-212:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 212: Surface transfer impedance |
| EN 2591-306:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 306: Mould growth |
| EN 2591-205:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B5: Housing (shell) electrical continuity |
| EN 2591-301:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part C1: Endurance at temperature |
| EN 2591-311:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 311: Low air pressure |
| EN 2591-305:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 305: Rapid change of temperature |
| EN 2591-319:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 319: Gastightness of solderless wrapped connections |
| EN 2591-421:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 421: Free fall |
| EN 2591-213:1997 | Aeropsace series - Elements of electrical and optical connection - Test methods - Part 213: Shielding effectiveness from 100 MHz to 1 GHz |
| EN 2591-418:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 418: Gauge insertion/extraction forces (female contacts) |
| EN 2591-425:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 425: Unwrapping capability, solderless wrapped connections |
| EN 2591-502:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 502: Restricted entry |
| EN 2591-316:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 316: Ozone resistance |
| EN 2591-315:2015 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 315: Fluid resistance |
| EN 2591-405:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 405: Axial load |
| EN 2591-308:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 308: Sand and dust |
| EN 2591-318:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 318: Fire-resistance |
| EN 2591-401:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part D1: Acceleration, steady state |
| EN 2591-220:2005 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 220: Contact/conductor joint ageing by current and temperature cycling |
| EN 2591-412:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 412: Contact insertion and extraction forces |
| EN 2591-414:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 414: Unmating of lanyard release connectors |
| EN 2591-203:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B3: Electrical continuity at microvolt level |
| EN 2591-408:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 408: Mating and unmating forces |
| EN 2591-323:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 323: Thermal shock |
| EN 2591-201:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B1: Contact resistance - Low level |
| EN 2591-101:1994 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 101: Visual examination |
| EN 2591-417:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 417: Tensile strength (crimped connection) |
| EN 2591-322:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 322: Hermeticity |
| EN 2591-312:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 312: Air leakage |
| EN 2591-102:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part A2: Examination of dimensions and mass |
| EN 2591-424:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 424: Stripping force, solderless wrapped connections |
| EN 2591-514:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 514: Solderability of contacts with self-contained solder and flux |
| EN 2591-406:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 406: Mechanical endurance |
| EN 2591-216:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 216: Engagement depth of contacts |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| EN 2591-410:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 410: Insert retention in housing (axial) |
| EN 2591-320:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 320: Simulated solar radiation at ground level |
| EN 2591-513:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 513: Magnetic permeability |
| EN 2591-420:2006 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 420: Mechanical strength of rear accessories |
| EN 2591-204:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B4: Discontinuity of contacts in the microsecond range |
| EN 2591-505:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 505: Contact protection effectiveness (scoop-proof) |
| EN 2591-206:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B6: Measurement of insulation resistance |
| EN 2591-507:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 507: Plating porosity |
| EN 2591-317:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 317: Flammability |
| EN 2591-208:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B8: Temperature rise due to rated current |
| EN 2591-409:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 409: Contact retention in insert |
| EN 2591-313:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 313: Artificial rain |
| EN 2591-210:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 210: Electrical overload |
| EN 2591-506:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 506: Use of tools |
| EN 2591-214:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 214: Lightning strike, current and voltage pulse |
| EN 2591-407:1999 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 407: Durability of contact retention system and seals |
| EN 2591-321:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 321: Damp heat, cyclic test |
| EN 2591-314:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 314: Immersion at low air pressure |
| EN 2591-509:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 509: Adhesion of coating on contacts |
| EN 2591-413:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 413: Holding force of grounding spring system |
| EN 2591-309:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 309: Dry heat |
| EN 2591-501:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 501: Soft solderability |
| EN 2591-304:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 304: Damp heat steady state |
| EN 2591-402:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 402: Shock |
| EN 2591-503:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 503: Contact deformation after crimping |
| EN 2591-411:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 411: Insert retention in housing (torsional) |
| EN 2591-419:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 419: Stability of male contacts in insert |
| EN 2591-202:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B2: Contact resistance at rated current |
| EN 2591-302:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 302: Climatic sequence |
| EN 2591-209:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B9: Current temperature derating |
| EN 2591-211:2002 | Aerospaces series - Elements of electrical and optical connection - Test Methods - Part 211: Capacitance |
| EN 2591-508:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 508: Measurement of thickness of coating on contacts |
| EN 2591-307:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 307: Salt mist |
| EN 2591-207:1996 | Aerospace series - Elements of electrical and optical connection - Test methods - Part B7: Voltage proof test |
| EN 2591-422:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 422: Locking wire hole strength |
| EN 2591-416:2001 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 416: Contact bending strength |
| EN 2591-324:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 324: Interfacial sealing |
| EN 2591-512:2002 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 512: Effectiveness of non-removable fixing of hermetically sealed connector shell |
| EN 2591-415:2001 | Aerospace series - Elements of electrical and optical connection - Test methodsPart 415: Test probe damage (female contacts) |
| EN 2591-310:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 310: Cold |
| EN 2591-403:2012 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 403: Sinusoidal and random vibration |
| EN 2591-404:1998 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 404: Transverse load |
| EN 2591-303:1997 | Aerospace series - Elements of electrical and optical connection - Test methods - Part 303: Cold/low pressure and damp heat |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.