PREN 3197 : 200P2
Current
Current
The latest, up-to-date edition.
AEROSPACE SERIES - DESIGN AND INSTALLATION OF AIRCRAFT ELECTRICAL AND OPTICAL INTERCONNECTION SYSTEMS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-31-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
ORGANISATION OF THIS STANDARD (Detailed organisation
may be found in Annex A)
1 Scope
2 Normative references
3 Terms and definitions
4 Limitations
5 General requirements
6 Selection of EWIS and OFIS Components
7 Components Identification
8 Separation and principles to apply
9 Installation and manufacturing principles
10 Modification and repairs by Supplementary Type Certification
applicants (STC)
11 EWIS and OFIS Safety
Annex A (informative) - EN 3197 detailed content
Annex B (normative) - Main normative references and ASD-STAN
Technical Reports per family of products
Annex C (informative) - Differences of electrochemical potentials
between some conductive materials (in mV)
Specifies instructions on the methods to be used when designing, selecting, manufacturing, installing, repairing or modifying the aerospace vehicles electrical and optical interconnection networks, now called Electrical Wiring Interconnection System (EWIS), and Optical Fibre Interconnection Systems (OFIS), subject to the limitations.
| DevelopmentNote |
Supersedes AIR 7822 (06/2002)
|
| DocumentType |
Draft
|
| Pages |
108
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Current
|
| Standards | Relationship |
| 09/30202200 DC : 0 | Identical |
| PREN 3371 : 200P1 | AEROSPACE SERIES - ELECTRICAL BONDING - TECHNICAL SPECIFICATION |
| PREN 3372-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, MEDIUM AND HIGH CONTACT DENSITY, SCOOP-PROOF WITH BAYONET COUPLING, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| PREN 2853 : 200P1 | AEROSPACE SERIES - CURRENT RATINGS FOR ELECTRICAL CABLES WITH CONDUCTOR EN 2083 |
| XP PREN 3545-002 : 1997 XP | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT |
| PREN 4645-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| PREN 4626-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE OPERATING TEMPERATURES -65 DEGREES C TO 125 DEGREES C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| PREN 4644-002 : 200P3 | AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS, OPERATING TEMPERATURE 175 DEGREES C (OR 125 DEGREES C) CONTINUOUS - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| PREN 3545-001 : 200P4 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3733-001:2009 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| 13/30280018 DC : 0 | BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION |
| 13/30278621 DC : 0 | BS EN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| BS EN 3545-002:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 °C to 175 °C Specification of performance and contact arrangements |
| BS EN 3372-001:2007 | Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous Technical specification |
| BS EN 3545-001:2008 | Aerospace series. Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55°C to 175°C Technical specification |
| 08/30184548 DC : DRAFT JUNE 2008 | BS EN 6049-002 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES IN META-ARAMID FIBRES - PART 002: GENERAL AND LIST OF PRODUCT STANDARD |
| 06/30157874 DC : 0 | PREN 2593-005 - AEROSPACE SERIES - BASES FOR 10 A ELECTROMAGNETIC PLUG-IN RELAYS, TWO AND FOUR POLES DOUBLE THROW - PART 005: ACCORDING TO EN 2548-005 - BASE WITH MOLDED-IN FIXATION STUD, METRIC - PRODUCT STANDARD |
| XP PREN 3545-001 : 1997 XP | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 001: TECHNICAL SPECIFICATION |
| PREN 4067-001 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, COUPLED BY THREADED RING, FIRE-RESISTANT, OPERATING TEMPERATURE 260 DEGREES C PEAK - TECHNICAL SPECIFICATION |
| 08/30193844 DC : DRAFT DEC 2008 | BS EN 3475-604 - AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 604: RESISTANCE TO DRY ARC PROPAGATION |
| BS EN 4626-001:2008 | Aerospace series. Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule. Operating temperatures -65 °C to 125 °C (cable dependent). Flush contacts Technical specification |
| I.S. EN 3545-001:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3545-002:2008 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREE C TO 175 DEGREE C - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| PREN 3733-001 : 200P1 | AEROSPACE SERIES - CONNECTOR, OPTICAL, CIRCULAR, SINGLE CHANNEL, COUPLED BY SELF-LOCKING RING, OPERATING TEMPERATURE UP TO 150 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| PREN 6047-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FOR HIGH CURRENT OPERATING TEMPERATURE +200 DEGREE C CONTINUOUS, AND FIRE RESISTANT - TECHNICAL SPECIFICATION |
| PREN 4640-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4640-001:2009 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK AND PANEL, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| EN 3475-605:2018 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 605: Wet short circuit test |
| 06/30145640 DC : 0 | EN 4639-102 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT 1,25 DIA. FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 102: OPTICAL CONTACT FOR EN C2 10 A 102 CABLE OPERATING TEMPERATURE -55 DEGREE C TO 100 DEGREE C - PRODUCT STANDARD |
| TR 4653 : 2 | AEROSPACE SERIES - TECHNICAL SPECIFICATION OF PLATING OF CONNECTORS - CADMIUM AND HEXAVALENT CHROMIUM REPLACEMENT |
| PREN 4067-002 : 200P2 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, SCOOP-PROOF, COUPLED BY THREADED RING, FIRE RESISTANT, OPERATING TEMPERATURE 260 DEGREES C PEAK - SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| I.S. EN 4626-001:2008 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MULTICONTACT, RACK AND PANEL, QUADRAX CAVITY, 2,5 MM DIAMETER FERRULE - OPERATING TEMPERATURES -65 DEGREE C TO 125 DEGREE C (CABLE DEPENDENT) - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 4645-001:2010 | AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, SELF-LOCKING 1,25 MM DIAMETER FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3475-605:2018 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 605: WET SHORT CIRCUIT TEST |
| 09/30212622 DC : 0 | BS EN 3682-002 - AEROSPACE SERIES - CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, INTERCHANGEABLE INSERT TYPE, RACK TO PANEL, OPERATING TEMPERATURE 150 DEGREE C CONTINUOUS - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| BS EN 4645-001:2010 | Aerospace series. Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder Technical specification |
| 00/707786 DC : 0 | PREN 4165-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURES 175 DEGREES C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| 07/30167562 DC : 0 | BS EN 4645-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING, 1,25 MM DIA. FERRULE WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| 06/30157873 DC : 0 | PREN 2593-003 - AEROSPACE SERIES - BASES FOR 10 A ELECTROMAGNETIC PLUG-IN RELAYS, TWO AND FOUR POLES DOUBLE THROW - PART 003: ACCORDING TO EN 2548-003 - BASE WITH NON-CAPTIVE FIXATION STUD, METRIC - PRODUCT STANDARD |
| 13/30280019 DC : 0 | BS EN 2997-002 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| 09/30206879 DC : 0 | BS EN 2997-001 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION |
| 15/30322426 DC : 0 | BS EN 6049-001 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVE IN META-ARAMID FIBRES - PART 001: TECHNICAL SPECIFICATION |
| 09/30210064 DC : DRAFT SEP 2009 | BS EN 4531-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, CIRCULAR, SINGLE AND MULTIPIN, COUPLED BY THREADED RING - FLUSH CONTACTS - PART 001: TECHNICAL SPECIFICATION |
| 06/30149872 DC : 0 | EN 4640-001 - AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, RACK TO PANEL, MULTICONTACT, 1,25 DIA - FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| 08/30193847 DC : DRAFT DEC 2008 | BS EN 3475-605 - AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 605: WET SHORT CIRCUIT TEST |
| BS EN 4640-001:2009 | Aerospace series. Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Technical specification |
| 13/30293650 DC : 0 | BS EN 4165-002 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, MODULAR - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| BS EN 3733-001:2009 | Aerospace series. Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150°C continuous Technical specification |
| BS EN 3218-002:2006 | Aerospace series. Connectors, rectangular, with metallic shells and screw-locking Specification of performance and contact arrangements |
| BS EN 3372-002:2007 | Aerospace series. Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures -65°C to 175°C or 200°C continuous Specification of performance and contact arrangement |
| 09/30212621 DC : 0 | BS EN 3682-001 - AEROSPACE SERIES - CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, INTERCHANGEABLE INSERT TYPE, RACK TO PANEL, OPERATING TEMPERATURE 150 DEGREE C CONTINUOUS - PART 001: TECHNICAL SPECIFICATION |
| 12/30263294 DC : 0 | BS EN 6059-100 - AEROSPACE SERIES - ELECTRICAL CABLES, INSTALLATION - PROTECTION SLEEVES - TEST METHODS - PART 100: GENERAL |
| EN 3372-001:2007 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 001: Technical specification |
| EN 3733-001:2009 | Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 001: Technical specification |
| EN 4639-001:2007 | Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification |
| EN 4645-001:2010 | Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring, self-locking 1,25 mm diameter ferrule with removable alignment sleeve holder - Part 001: Technical specification |
| EN 3545-002:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 002: Specification of performance and contact arrangements |
| EN 3372-002:2007 | Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements |
| EN 4626-001:2008 | Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures -65 °C to 125 °C (cable dependent) - Flush contacts - Part 001: Technical specification |
| EN 3646-002:2007 | Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements |
| EN 3218-002:2006 | Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements |
| EN 2853:2005 | Aerospace series - Current ratings for electrical cables with conductor EN 2083 |
| EN 4640-001:2009 | Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification |
| EN 3545-001:2008 | Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures - 55 °C to 175 °C - Part 001: Technical specification |
| PREN 3545-002 : 200P5 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, RECTANGULAR, WITH SEALED AND NON-SEALED REAR, PLASTIC HOUSING, LOCKING DEVICE, OPERATING TEMPERATURES -55 DEGREES C TO 175 DEGREES C - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| PREN 3218-002 : 200P1 | AEROSPACE SERIES - CONNECTORS, RECTANGULAR, WITH METALLIC SHELLS AND SCREW-LOCKING - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| PREN 3372-002 : 200P1 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, MEDIUM AND HIGH CONTACT DENSITY, SCOOP-PROOF WITH BAYONET COUPLING, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C OR 200 DEGREES C CONTINUOUS - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| PREN 4639-001 : 200P1 | AEROSPACE SERIES - CONNECTORS, OPTICAL, RECTANGULAR, MODULAR, MULTICONTACT, 1,25 DIAMETER FERRULE, WITH REMOVABLE ALIGNMENT SLEEVE HOLDER - PART 001: TECHNICAL SPECIFICATION |
| PREN 2997-001 : 200P4 | AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREES C TO 175 DEGREES C CONTINUOUS, 200 DEGREES C CONTINUOUS, 260 DEGREES C PEAK - PART 001: TECHNICAL SPECIFICATION |
| I.S. EN 3475-604:2018 | AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 604: RESISTANCE TO DRY ARC PROPAGATION |
| BS EN 4639-001:2007 | Aerospace series. Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder Technical specification |
| BS EN 3646-002:2007 | Aerospace series. Connectors, electrical, circular, bayonet coupling, operating temperature 175°C or 200°C continuous Specification of performance and contact arrangements |
| 08/30193841 DC : DRAFT DEC 2008 | BS EN 3475-603 - AEROSPACE SERIES - CABLES, ELECTRICAL, AIRCRAFT USE - TEST METHODS - PART 603: RESISTANCE TO WET ARC TRACKING |
| BS EN 2853:2005 | Current ratings for electrical cables with conductor EN 2083 |
| 09/30206880 DC : 0 | BS EN 2997-002 - AEROSPACE SERIES - CONNECTORS, ELECTRICAL, CIRCULAR, COUPLED BY THREADED RING, FIRE-RESISTANT OR NON FIRE-RESISTANT, OPERATING TEMPERATURES -65 DEGREE C TO 175 DEGREE C CONTINUOUS, 200 DEGREE C CONTINUOUS, 260 DEGREE C PEAK - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| 06/30157875 DC : 0 | PREN 2593-004 - AEROSPACE SERIES - BASES FOR 10 A ELECTROMAGNETIC PLUG-IN RELAYS, TWO AND FOUR POLES DOUBLE THROW - PART 004: BASE WITH MOLDED-IN FIXATION STUD, UNIFIED - PRODUCT STANDARD |
| 07/30169487 DC : 0 | BS EN 4644-002 - AEROSPACE SERIES - CONNECTOR, ELECTRICAL AND OPTICAL, RECTANGULAR, MODULAR, RECTANGULAR INSERTS - OPERATING TEMPERATURE 175 DEGREES C CONTINUOUS - PART 002: SPECIFICATION OF PERFORMANCE AND CONTACT ARRANGEMENTS |
| EN 2591:1992 | Aerospace series - Elements of electrical and optical connection - Test methods - General |
| ISO 4046-1:2002 | Paper, board, pulps and related terms Vocabulary Part 1: Alphabetical index |
| SAE AS83519/2A | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT WITH PRE INSTALLED LEADS FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I) |
| TR 9535 : 2008 | AEROSPACE SERIES - SUBSTANCE DECLARATION |
| EN 2235:2015 | Aerospace series - Single and multicore electrical cables, screened and jacketed - Technical specification |
| ISO 2685:1998 | Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
| EN 2083:2001 | Aerospace series - Copper and copper alloys conductors for electrical cables - Product standard |
| EN 60270:2001/A1:2016 | HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015) |
| MIL-DTL-22520 Revision G:1997 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
| EN 3475-100:2010 | Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General |
| EN 2084:2015 | Aerospace series - Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification |
| ASTM D 1868 : 2013 : REDLINE | Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems |
| ISO 2574:1994 | Aircraft — Electrical cables — Identification marking |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| PREN 3371 : 200P1 | AEROSPACE SERIES - ELECTRICAL BONDING - TECHNICAL SPECIFICATION |
| EN 2853:2005 | Aerospace series - Current ratings for electrical cables with conductor EN 2083 |
| SAE AS81824/1A | SPLICE, IN-LINE, ELECTRIC, CRIMP, SN/CU, ENVIRONMENTAL, HEAT-SHRINKABLE SLEEVE (150 °C), 1 × 1 SEALANT OPENING |
| TR 9536 : 2008 | AEROSPACE SERIES - DECLARABLE SUBSTANCES RECOMMENDED PRACTICE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.