PREN 2002-01 : 200P3
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - PART 1: TENSILE TESTING AT AMBIENT TEMPERATURE
Hardcopy , PDF
12-06-2023
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
0 Introduction
1 Scope
2 References
3 Definitions
4 Health and safety
5 Principle
6 Testing requirements
7 Test report
Annex A (normative) Types of test piece to be used for sheet
and strip with thickness less than 8 mm
Annex B (normative) Types of non-machined test piece to be
used in the case of bar, section and wire
with a diameter or thickness less than or
equal to 8 mm
Annex C (normative) Types of machined test piece to be used
in the case of bar, section, plate and
wire with diameter or thickness greater
than 8 mm and for forgings and castings
Annex D (normative) Types of test piece to be used in the case
of tubes
Specifies the requirements for the tensile testing of metallic materials at ambient temperature for aerospace applications.
| Committee |
C5
|
| DocumentType |
Draft
|
| Pages |
19
|
| ProductNote |
Superseded by EN 2002-001:2005
|
| PublisherName |
Aerospace & Defence Industries Association of Europe
|
| Status |
Withdrawn
|
| SupersededBy |
| PREN 4400-6 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM- ALLOYS - TECHNICAL SPECIFICATION - PART 6: ALUMINIUM ALLOY FORGING STOCK |
| PREN 2898 : 200P1 | AEROSPACE SERIES - CORROSION AND HEAT RESISTING STEEL RIVETS - TECHNICAL SPECIFICATION |
| PREN 4524 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - MEASUREMENT OF FATIGUE CRACK GROWTH RATES |
| PREN 4400-4 : DRAFT 2003 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 4526 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - SHARP EDGE-NOTCH TENSILE TESTING FOR SHEET AND STRIP |
| 01/713948 DC : 0 | PREN 4400-6 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 6: FORGING STOCK |
| 01/716044 DC : 0 | EN 4800-6 - AEROSPACE SERIES - TITANIUM AND TITANIUM ALLOYS - TECHNICAL SPECIFICATION - PART 6: PRE-PRODUCTION AND PRODUCTION FORGINGS |
| PREN 4523 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHODS - COMPRESSION TESTING |
| PREN 3322 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - SOLUTION TREATED AND AGED - GRADE 1 - FORGINGS - D[E] <= 75 MM |
| PREN 3225-4 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS PRODUCED FROM ATOMIZED POWDER - POWDER COMPACTED FORGING STOCK AND PARTS - TECHNICAL SPECIFICATION - PART 4 - PRE-PRODUCTION AND PRODUCTION PARTS |
| DIN EN 2103-3:1991-11 | AEROSPACE SERIES - STEEL, NICKEL BASE AND COBALT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 3: PRE-PRODUCTION AND PRODUCTION CASTINGS |
| DIN EN 2076-3:1990-09 | AEROSPACE SERIES; ALUMINIUM AND MAGNESIUM ALLOY INGOTS AND CASTINGS; TECHNICAL SPECIFICATION; PRE-PRODUCTION AND PRODUCTION CASTINGS |
| BS EN 2858-3:1994 | Titanium and titanium alloys. Forging stock and forgings. Technical specifications Pre-production and production forgings |
| DIN EN 2103-2:1991-11 | AEROSPACE SERIES - AEROSPACE SERIES - STEEL, NICKEL BASE AND COBATT BASE ALLOY REMELTING STOCK AND CASTINGS - TECHNICAL SPECIFICATION - PART 2 - REMELTING STOCK |
| EN 2103-3:1991 | Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specifications - Part 3: Pre-production and production castings |
| PREN 2941 : 200P1 | AEROSPACE SERIES - NICKEL ALLOY RIVETS - TECHNICAL SPECIFICATION |
| PREN 3321 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P65001 - AS FORGED - GRADE 1 FORGING STOCK, FOR SOLUTION TREATED AND AGED FORGINGS - A OR D <= 360 MM |
| PREN 4400-2 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 2: SHEET AND STRIP |
| PREN 2002-23 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 23 - SHARP-NOTCH TENSION TESTING |
| 00/705877 DC : 0 | PREN 4400-3 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| BS EN 2858-2:1994 | Titanium and titanium alloys. Forging stock and forgings. Technical specification. Forging stock |
| EN 2103-2:1991 | Aerospace series - Steel, nickel base and cobalt base alloy remelting stock and castings - Technical specification - Part 2: Remelting stock |
| PREN 3225-3 : 200P1 | AEROSPACE SERIES - HEAT RESISTING ALLOYS PRODUCED FROM ATOMIZED POWDER - POWDER COMPACTED FORGING STOCK AND PARTS - TECHNICAL SPECIFICATION - PART 3 - HOT COMPACTED FORGING STOCK |
| PREN 4400-3 : 200P1 | AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM ALLOY WROUGHT PRODUCTS - TECHNICAL SPECIFICATION - PART 3: BAR AND SECTION |
| 03/310514 DC : 0 | BS EN 4400-4 - AEROSPACE SERIES - ALUMINIUM AND ALUMINIUM- AND MAGNESIUM-ALLOYS - TECHNICAL SPECIFICATION - PART 4: ALUMINIUM AND ALUMINIUM ALLOY TUBE |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.