PREN 14306 : DRAFT 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION
Superseded date
12-01-2015
Superseded by
Published date
05-26-2015
Publisher
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols, units and abbreviated terms
4 Requirements
5 Test methods
6 Designation code
7 Assessment and Verification of the Constancy
of Performance (AVCP)
8 Marking and labelling
Annex A (normative) - Factory production control
Annex B (normative) - Determination of minimum
service temperature
Annex C (informative) - Preparation of the test specimens
to measure thermal conductivity
Annex D (informative) - Additional properties
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
Provides the requirements for factory made calcium silicate products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately -170 degrees C to +1100 degrees C.
| Committee |
TC 88
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 15/30315072 DC : DRAFT MAY 2015 | Identical |
| ISO 9229:2007 | Thermal insulation Vocabulary |
| EN ISO 8894-1:2010 | Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010) |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity |
| EN 12085:2013 | Thermal insulating products for building applications - Determination of linear dimensions of test specimens |
| EN 13468:2001 | Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH |
| EN 13820:2003 | Thermal insulating materials for building applications - Determination of organic content |
| EN 993-9:1997 | Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression |
| EN 13471:2001 | Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| EN ISO 8497:1996 | Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994) |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN 993-4:1995 | Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases |
| EN ISO 9229:2007 | Thermal insulation - Vocabulary (ISO 9229:2007) |
| EN 13469:2012 | Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
| EN 824:2013 | Thermal insulating products for building applications - Determination of squareness |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 825:2013 | Thermal insulating products for building applications - Determination of flatness |
| ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
| EN 823:2013 | Thermal insulating products for building applications - Determination of thickness |
| ISO 8497:1994 | Thermal insulation — Determination of steady-state thermal transmission properties of thermal insulation for circular pipes |
| EN ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
| EN 13470:2001 | Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 1602:2013 | Thermal insulating products for building applications - Determination of the apparent density |
| EN 29053:1993 | Acoustics - Materials for acoustical applications - Determination of airflow resistance (ISO 9053:1991) |
| ISO 11654:1997 | Acoustics — Sound absorbers for use in buildings — Rating of sound absorption |
| ISO 8894-1:2010 | Refractory materials Determination of thermal conductivity Part 1: Hot-wire methods (cross-array and resistance thermometer) |
| EN 13472:2012 | Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
| EN 1603:2013 | Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 °C/ 50 % relative humidity) |
| EN 1604:2013 | Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions |
| EN 1094-6:1998 | Insulating refractory products - Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987 modified) |
| EN 13639:2017 | Determination of total organic carbon in limestone |
| EN 12089:2013 | Thermal insulating products for building applications - Determination of bending behaviour |
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
| EN 993-1:1995 | Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity |
| EN 1609:2013 | Thermal insulating products for building applications - Determination of short term water absorption by partial immersion |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN ISO 11654:1997 | Acoustics - Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) |
| EN 15715:2009 | Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
| EN 12086:2013 | Thermal insulating products for building applications - Determination of water vapour transmission properties |
| EN 13172:2012 | Thermal insulation products - Evaluation of conformity |
| EN 822:2013 | Thermal insulating products for building applications - Determination of length and width |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.