PREN 13121-1 : DRAFT 1998
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - ACCEPTANCE CONDITIONS AND USAGE CONDITIONS
05-01-2003
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions, symbols and abbreviations
3.1 Definitions
3.2 Symbols and abbreviations
4 Thermosetting resins
4.1 General
4.2 Unsaturated polyester resins
4.3 Vinylester resins
4.4 Epoxy resins
4.5 Furane resins
4.6 Phenolic resins
4.7 Characterisation of thermosetting resins in the
uncured state
4.8 Characterisation of thermosetting resins in the
cured state
5 Curing agents for polyester and vinyl ester resins
5.1 General
5.2 Initiators
5.3 Accelerators
5.4 Promotors
5.5 Inhibitors
6 Reinforcing materials
6.1 General
6.2 Surface nonwovens
6.3 Chopped strand mats
6.4 Continuous strand mats
6.5 Woven fabrics/Woven roving fabrics
6.6 Rovings for winding and for chopping applications
7 Additives
7.1 General
7.2 Thixotropic agents
7.3 Conductive fillers
7.4 Fire retardants
7.5 Paraffin wax
7.6 Aggregates and fillers
7.7 Ultra-violet absorbers
7.8 Pigments
7.9 Surface active agents
8 Thermolplastic lining materials
8.1 General
8.2 Mechanical and thermal properties
8.3 Chemical resistance properties
8.4 Lining adhesion to laminate
8.5 Welding consumables
8.6 Dimensional stability and tolerances
9 Quality control, quality assurance and acceptance
conditions for raw materials
9.1 General
9.2 Unsaturated polyester resins and vinylester resins
9.3 Epoxy resins and hardeness
9.4 Furane and phenolic resins
9.5 Initiators
9.6 Accelerators, promotors, inhibitors
9.7 Additives
9.8 Surface nonwovens
9.9 Chopped strand mats
9.10 Woven fabrics/Woven rovings fabrics
9.11 Rovings for winding and for chopping applications
9.12 Thermoplastic linings
Annex Z (informative) Clauses of this European Standard adressing
essential requirements or other provisions of EN Directives
Defines requirements for acceptance and usage conditions of raw materials for GRP tanks and vessels with or without lining for storage or processing of fluids, factory made or site built, non pressurised or pressurised, for use above ground.
| Committee |
TC 210
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| Standards | Relationship |
| 98/123516 DC : DRAFT JULY 1998 | Identical |
| BS EN 13280:2001 | Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water |
| 01/120080 DC : DRAFT JAN 2001 | BS EN 13923 - FILAMENT WOUND FRP PRESSURE VESSELS - MATERIALS, DESIGN, CALCULATION, MANUFACTURING AND TESTING |
| 01/121060 DC : DRAFT MAR 2001 | PREN 13121-3 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 3: DESIGN AND WORKMANSHIP |
| EN 13280:2001 | Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.