PREN 10263-1 : DRAFT 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS
11-01-2017
03-04-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification and Designation
5 Information to be supplied by the purchaser
6 Production Process
7 Requirements
8 Dimensions and tolerances on dimensions
and shape
9 Testing and inspection
10 Test methods
11 Marking
12 Packaging
13 Protection
14 Complaints after delivery
15 Options
Annex A (normative) - Supplementary or special
requirements
Annex B (normative) - Determination and assessment
of non-metallic inclusions
Bibliography
Defines the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of: a) non alloy steels not intended for heat treatment after cold working, as specified in prEN 10263-2:2013; b) non alloy and alloy steels for case hardening, as specified in prEN 10263-3:2013; c) non alloy and alloy steels for quenching and tempering, as specified in prEN 10263-4:2013; and d) stainless steels, as specified in prEN 10263-5:2013.
| Committee |
ECISS/TC 106
|
| DocumentType |
Draft
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| 14/30294825 DC : 0 | Identical |
| 14/30294837 DC : 0 | BS EN 10263-5 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS |
| 14/30294828 DC : 0 | BS EN 10263-2 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 2: TECHNICAL DELIVERY CONDITIONS FOR STEELS NOT INTENDED FOR HEAT TREATMENT AFTER COLD WORKING |
| PREN 10263-5 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STAINLESS STEELS |
| 14/30294831 DC : 0 | BS EN 10263-3 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 3: TECHNICAL DELIVERY CONDITIONS FOR CASE HARDENING STEELS |
| PREN 10263-4 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 4: TECHNICAL DELIVERY CONDITIONS FOR STEELS FOR QUENCHING AND TEMPERING |
| 14/30294834 DC : 0 | BS EN 10263-4 - STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 4: TECHNICAL DELIVERY CONDITIONS FOR STEELS FOR QUENCHING AND TEMPERING |
| PREN 10263-3 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 3: TECHNICAL DELIVERY CONDITIONS FOR CASE HARDENING STEELS |
| PREN 10263-2 : DRAFT 2014 | STEEL ROD, BARS AND WIRE FOR COLD HEADING AND COLD EXTRUSION - PART 2: TECHNICAL DELIVERY CONDITIONS FOR STEELS NOT INTENDED FOR HEAT TREATMENT AFTER COLD WORKING |
| EN ISO 14284:2002 | Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
| EN 10052:1993 | Vocabulary of heat treatment terms for ferrous products |
| EN 10247:2017 | Micrographic examination of the non-metallic inclusion content of steels using standard pictures |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| ISO 4967:2013 | Steel — Determination of content of non-metallic inclusions — Micrographic method using standard diagrams |
| EN 10079:2007 | Definition of steel products |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| CEN/TR 10261:2013 | Iron and steel - European standards for the determination of chemical composition |
| ISO 642:1999 | Steel — Hardenability test by end quenching (Jominy test) |
| EN 10221:1995 | Surface quality classes for hot-rolled bars and rods - Technical delivery conditions |
| EN 10218-2:2012 | Steel wire and wire products - General - Part 2: Wire dimensions and tolerances |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 377:2017 | Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| EN 10168:2004 | Steel products - Inspection documents - List of information and description |
| EN 10308:2001 | Non destructive testing - Ultrasonic testing of steel bars |
| EN 10278:1999 | Dimensions and tolerances of bright steel products |
| EN 10060:2003 | Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions |
| EN 10108:2004 | Round steel rod for cold heading and cold extrusion - Dimensions and tolerances |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 10017:2004 | Steel rod for drawing and/or cold rolling - Dimensions and tolerances |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN ISO 642:1999 | Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) |
| EN 10277-1:2008 | Bright steel products - Technical delivery conditions - Part 1: General |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 10020:2000 | Definition and classification of grades of steel |
| ISO 377:2017 | Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
| ISO 14284:1996 | Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.