PD ISO/TR 19201:2013
Current
The latest, up-to-date edition.
Mechanical vibration. Methodology for selecting appropriate machinery vibration standards
Hardcopy , PDF
English
07-31-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 International Standards
3 Terms and definitions
4 Evaluation of machine vibration
5 Measurements made on non-rotating parts
6 Measurements made on rotating parts
7 Related standards
8 Analytical guidelines for selecting the appropriate
vibration standard for specific machinery
Annex A (informative) - Bearing dynamics
Annex B (informative) - Pedestal dynamic stiffness
Annex C (informative) - Examples of typical values of dynamic
stiffness for bearings and pedestals
Annex D (informative) - Dynamic stiffness of the bearing part
combined with the pedestal
Annex E (informative) - International machinery vibration
standards shown by application area
Bibliography
Specifies guidance for selecting appropriate vibration standards for specific machine types, and thus selecting the appropriate vibration measurement and evaluation method.
| Committee |
GME/21/5
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Report provides guidance for selecting appropriate vibration standards for specific machine types, and thus selecting the appropriate vibration measurement and evaluation method. Synopses are given of ISO10816 (evaluation of machine vibration on non-rotating parts) and ISO7919 (evaluation of machine vibration on rotating parts), together with further International Standards related to machinery.
This Technical Report provides an overview of the relevant International Standards, giving a summary of their scopes. It also provides a theoretical, analytical basis for establishing whether vibration measurements should be carried out on non-rotating parts, rotating shafts or both for those machines where no previous experience exists. It is not intended to supersede established manufacturers\' or users\' practical experience with specific machine types since there can be specific features associated with a particular machine which lead to a different selection of the most relevant measurement procedure.
The aim of this Technical Report is not to equip the reader with all the technical details provided in the International Standards necessary to carry out a measurement or evaluation task on a particular machine; rather it guides the reader to the appropriate International Standards. It is these International Standards that provide the necessary details; and then, with suitable training, the reader is in a position to carry out the measurement or evaluation task.
| Standards | Relationship |
| ISO/TR 19201:2013 | Identical |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| ISO 13373-1:2002 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures |
| ISO 14839-4:2012 | Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| ISO 13373-3:2015 | Condition monitoring and diagnostics of machines Vibration condition monitoring Part 3: Guidelines for vibration diagnosis |
| ISO 14694:2003 | Industrial fans — Specifications for balance quality and vibration levels |
| ISO 13381-1:2015 | Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| VDI 3840:2004-05 | Vibration analysis for machine sets |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ISO 8579-2:1993 | Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
| ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
| ISO 21940-14:2012 | Mechanical vibration — Rotor balancing — Part 14: Procedures for assessing balance errors |
| ISO 20283-4:2012 | Mechanical vibration — Measurement of vibration on ships — Part 4: Measurement and evaluation of vibration of the ship propulsion machinery |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 10816-5:2000 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 13373-2:2016 | Condition monitoring and diagnostics of machines Vibration condition monitoring Part 2: Processing, analysis and presentation of vibration data |
| ISO 3046-5:2001 | Reciprocating internal combustion engines Performance Part 5: Torsional vibrations |
| ISO 10816-6:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 6: Reciprocating machines with power ratings above 100 kW |
| VDI 3838:2004-05 | Measurement and evaluation of mechanical vibration of reciprocating piston engines and piston compressors with power ratings above 100 kW - Addition to DIN ISO 10816-6 |
| ISO 14839-2:2004 | Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 2: Evaluation of vibration |
| VDI 3836:2012-02 | Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers - Addition to DIN ISO 10816-3 |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| ISO 7919-5:2005 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
| ISO 19499:2007 | Mechanical vibration Balancing Guidance on the use and application of balancing standards |
| ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
| ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| ISO 21940-13:2012 | Mechanical vibration — Rotor balancing — Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors |
| ISO 10816-7:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 10817-1:1998 | Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 22266-1:2009 | Mechanical vibration Torsional vibration of rotating machinery Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW |
| ISO 14839-3:2006 | Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 3: Evaluation of stability margin |
| ISO 7919-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
| ISO 14839-1:2002 | Mechanical vibration Vibration of rotating machinery equipped with active magnetic bearings Part 1: Vocabulary |
| ISO 17359:2011 | Condition monitoring and diagnostics of machines General guidelines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.