PD ISO/TR 18792:2008
Current
The latest, up-to-date edition.
Lubrication of industrial gear drives
Hardcopy , PDF
English
02-28-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
MCE/5
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Report is designed to provide currently available technical information with respect to the lubrication of industrial gear drives up to pitch line velocities of 30m/s. It is intended to serve as a general guideline and source of information about the different types of gear, and lubricants, and their selection for gearbox design and service conditions. This Technical Report is addressed to gear manufacturers, gearbox users and gearbox service personnel, inclusive of manufacturers and distributors of lubricants.
This Technical Report is not applicable to gear drives for automotive transmissions.
| Standards | Relationship |
| ISO/TR 18792:2008 | Identical |
| ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
| ASTM D 665 : 2014-11 | TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
| ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| ISO 701:1998 | International gear notation Symbols for geometrical data |
| ISO 1122-2:1999 | Vocabulary of gear terms Part 2: Definitions related to worm gear geometry |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| IP 334 : 2015 | DETERMINATION OF LOAD CARRYING CAPACITY OF LUBRICANTS - FZG GEAR MACHINE METHOD |
| ISO/TR 13989-1:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| ISO/TR 13989-2:2000 | Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
| ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
| ISO 14635-2:2004 | Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
| ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| AGMA 925 : A | EFFECT OF LUBRICATION ON GEAR SURFACE DISTRESS |
| DIN 51819-3:2016-12 | TESTING OF LUBRICANTS - MECHANICAL-DYNAMIC TESTING IN THE ROLLER BEARING TEST APPARATUS FE8 - PART 3: TEST METHOD FOR LUBRICATING OILS - APPLIED TEST BEARING: AXIAL CYLINDRICAL ROLLER BEARING |
| ASTM D 341 : 2017 : REDLINE | Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products |
| ISO 3733:1999 | Petroleum products and bituminous materials — Determination of water — Distillation method |
| ASTM D 5182 : 1997 : EDT 1 | Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method) |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO/TR 14179-1:2001 | Gears Thermal capacity Part 1: Rating gear drives with thermal equilibrium at 95 C sump temperature |
| AGMA 9005 : E | INDUSTRIAL GEAR LUBRICATION |
| ISO 53:1998 | Cylindrical gears for general and heavy engineering Standard basic rack tooth profile |
| ASTM D 4998 : 2013 : REDLINE | Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids |
| ASTM D 2711 : 2017 : REDLINE | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| DIN ISO 14635-1:2006-05 | Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000) |
| ISO 14635-3:2005 | Gears — FZG test procedures — Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases |
| ISO/TR 14179-2:2001 | Gears Thermal capacity Part 2: Thermal load-carrying capacity |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| ISO 10825:1995 | Gears — Wear and damage to gear teeth — Terminology |
| ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
| ASTM D 943 : 2017-08 | TEST METHOD FOR OXIDATION CHARACTERISTICS OF INHIBITED MINERAL OILS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.