PD CEN/TS 16526:2013
Current
The latest, up-to-date edition.
Sandwich boards for furniture (SWB-F). Factory made products. Definition, classification and test methods for determination of performance characteristics
Hardcopy , PDF
English
11-30-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 Symbols
6 Conditioning and test conditions
7 Sampling, preparation and handling of test pieces
and expression of test results
8 Test methods
9 Marking
10 Test report
Annex A (normative) - Test methods
Annex B (informative) - Characterization of sandwich
boards for different applications in furniture
manufacturing
Bibliography
Specifies terms, describes a classification and defines test methods for flat, factory made, non-structural, faced and unfaced sandwich boards for use in furniture manufacturing (SWB-F) for dry (service class 1) and humid conditions (service class 2).
| Committee |
B/541
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This European Technical Specification defines terms, establishes a classification and specifies test methods for flat, factory made, non-structural, faced and unfaced sandwich boards for use in furniture manufacturing (SWB-F) for dry (service class 1) and humid conditions (service class 2). This European Technical Specification does not specify requirements.
Guidance is provided for the selection of board properties which are relevant for specific board applications.
This European Technical Specification is not applicable to products which are already covered by existing standards.
| Standards | Relationship |
| CEN/TS 16526:2013 | Identical |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 14323:2017 | Wood-based panels - Melamine faced boards for interior uses - Test methods |
| EN 950:1999 | Door leaves - Determination of the resistance to hard body impact |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| DIN 68874-1:1985-01 | SHELVES AND SHELF BEARERS IN CABINET FURNITURE; REQUIREMENTS AND TESTING WHEN MOUNTED IN THE CABINET |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 312:2010 | Particleboards - Specifications |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| EN 789:2004 | Timber structures - Test methods - Determination of mechanical properties of wood based panels |
| EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
| EN 325:2012 | Wood-based panels - Determination of dimensions of test pieces |
| EN 1294:2000 | Door leaves - Determination of the behaviour under humidity variations in successive uniform climates |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 320:2011 | Particleboards and fibreboards - Determination of resistance to axial withdrawal of screws |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 14727:2005 | Laboratory furniture - Storage units for laboratories - Requirements and test methods |
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
| EN 313-2:1999 | Plywood - Classification and terminology - Part 2: Terminology |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| EN 383:2007 | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 1464:2010 | Adhesives - Determination of peel resistance of adhesive bonds - Floating roller method |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 826:2013 | Thermal insulating products for building applications - Determination of compression behaviour |
| EN 622-1:2003 | Fibreboards - Specifications - Part 1: General requirements |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.