PD CEN/TR 14819-1:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire Funicular railways in tunnels
Hardcopy , PDF
01-18-2019
English
11-10-2004
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General recommendations
4.1 Application of the technical report
4.2 Safety principles
4.2.1 Hazard scenarios
4.2.2 Safety measures
5 Basic recommendations
6 Recommendations concerning fire prevention and firefighting in
the carriers
6.1 Materials
6.2 Electrical cabinets
6.3 Cabling outside the electrical cabinets and lighting
6.4 Batteries
6.5 Battery chargers
6.6 Video equipment (camera, monitor)
6.7 Heating, air conditioning
6.8 Electrical components outside cabinets which are energized
during travel (dynamos, alternators, motors)
6.9 Pantographs
6.10 Rail brake - Retarder
6.11 Hydraulic power plants and circuits - Pressure vessels -
Refrigerants
6.12 Rotating parts (wheels, axles, bearings)
6.13 Prohibition of smoking, open fires and the transportation of
flammable materials
6.14 Extinguishers and other means of firefighting
6.15 Dimensioning of the carriers
6.16 Recovery measures in the event of a fire on board the carrier
6.17 Emergency exits from the carriers
7 Recommendations concerning fire prevention and firefighting in the
tunnel
7.1 Tunnel materials
7.2 Fire - Smoke from a station
7.3 Rails and overhead catenaries supplying auxiliary electrical
energy to the carriers
7.4 Lighting equipment
7.5 Transmission of electrical energy in the tunnel
7.6 Remote communication cable between carrier and control point
7.7 Transportation of flammable liquid inside the tunnel
7.8 Spaces adjacent to the tunnel (outside stations)
7.9 Communication device
8 Recommendations concerning fire prevention and firefighting in
stations
8.1 General
8.2 Platform materials
8.3 Maintenance pit beneath carriers at the platform
8.4 Spaces adjacent to the platforms
8.5 Transmission of electrical energy
8.6 Contacts for recharging of the carrier batteries
8.7 Video equipment (camera, monitor)
8.8 Dispensing machines for users and other platform furniture
8.9 Prohibition of smoking, open fires and the transportation of
flammable materials
8.10 Extinguishers
8.11 Smoke detection and clearing
9 Recommendations concerning fire prevention and firefighting in the
machine room and the space for the electrical power system
9.1 Prevention
9.2 Limitation of spread of fire
10 Recommendations concerning fire prevention and firefighting in the
electrical supply spaces
11 Recommendations concerning fire prevention and firefighting in the
control room
11.1 Civil engineering
11.2 Spaces adjacent to the control point
11.3 Electrical equipment
11.4 Video monitors
11.5 Space heating
11.6 Domestic utensils
11.7 Furniture
11.8 Putting safety devices out of service
11.9 Personnel
12 Lightning
13 Training of personnel
14 Maintenance
Bibliography
Describes safety recommendations applicable to the prevention and fighting of fires in funicular railways in tunnels that may endanger the health and safety of persons.
Committee |
MCE/20
|
DocumentType |
Standard
|
Pages |
26
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
This part of CEN/TR 14819 specifies safety recommendations applicable to the prevention and fighting of fires in funicular railways in tunnels that may endanger the health and safety of persons. This part of CEN/TR 14819 covers the design, manufacture, construction, maintenance and operation of all funicular railways running in tunnels of length greater than 300 m or where the evacuation zones are more than 300 m apart, an evacuation zone being comparable to a station from the point of view of protecting passengers against fire risks. Tunnels with these characteristics are called \'long tunnels\' in the following. For shorter tunnels, some of the same measures could be applied depending on the results of the installation safety study and taking account particularly of the number of passengers and the width of the evacuation passage. With regard to these fire problems, it is essential to take organizational measures relating to operation, but these are not covered in this document
Standards | Relationship |
CEN/TR 14819-1:2004 | Identical |
EN 25923:1993 | Fire protection - Fire extinguishing media - Carbon dioxide (ISO 5923:1989) |
PREN 12927-8 : DRAFT 1998 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 8: NON-DESTRUCTIVE TESTING |
PREN 12927-6 : DRAFT 1999 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 6: DISCARD CRITERIA |
ENV 13381-4:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied protection to steel members |
EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
PREN 45545-5 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 5: FIRE SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT INCLUDING THAT OF TROLLEY BUSES, TRACK GUIDED BUSES AND MAGNETIC LEVITATION VEHICLES |
IEC 60331-11:1999+AMD1:2009 CSV | Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C |
ENV 13381-2:2002 | Test methods for determining the contribution to the fire resistance of stuctural members - Part 2: Vertical protective membranes |
PREN 45545-3 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 3: FIRE RESISTANCE REQUIREMENTS FOR FIRE BARRIERS |
PREN 1908 : DRAFT 2013 | SAFETY REQUIREMENTS OF CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - TENSIONING DEVICES |
EN 50290-2-27 : 2002 COR 2010 | COMMUNICATION CABLES - PART 2-27: COMMON DESIGN RULES AND CONSTRUCTION - HALOGEN FREE FLAME RETARDANT THERMOPLASTIC SHEATHING COMPOUNDS |
ENV 1991-2-2 : 1995 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - ACTIONS ON STRUCTURES EXPOSED TO FIRE |
PREN 45545-4 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 4: FIRE SAFETY REQUIREMENTS FOR ROLLING STOCK DESIGN |
PREN 13796-1 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 1: GRIPS, CARRIER TRUCKS, ON-BOARD BRAKES, CABINS, CHAIRS, CARRIAGES, MAINTENANCE CARRIERS, TOWHANGERS |
EN 671-2:2012 | Fixed firefighting systems - Hose systems - Part 2: Hose systems with lay-flat hose |
EN 50122-2:2010 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 2: PROVISIONS AGAINST THE EFFECTS OF STRAY CURRENTS CAUSED BY D.C. TRACTION SYSTEMS |
ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
EN 671-1:2012 | Fixed firefighting systems - Hose systems - Part 1: Hose reels with semi-rigid hose |
PREN 12927-2 : DRAFT 1999 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 2: SAFETY FACTORS |
PREN 12927-7 : DRAFT 1998 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 7: CALCULATION, REPAIR AND MAINTENANCE |
PREN 12927-4 : DRAFT 2001 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 4: END FIXING |
PREN 1909 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - RECOVERY AND EVACUATION |
PREN 13796-2 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 2: SLIPPING RESISTANCE TESTS FOR GRIPS |
ENV 1994-1-2 : 94 AC 95 | EUROCODE 4: DESIGN OF COMPOSITE STEEL AND CONCRETE STRUCTURES - GENERAL RULES - STRUCTURAL FIRE DESIGN |
EN 50206-2:2010 | Railway applications - Rolling stock - Pantographs: Characteristics and tests - Part 2: Pantographs for metros and light rail vehicles |
EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
PREN 12929-2 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - GENERAL REQUIREMENTS - PART 2: ADDITIONAL REQUIREMENTS FOR REVERSIBLE BICABLE AERIAL ROPEWAYS WITHOUT CARRIER TRUCK BRAKES |
EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
PREN 1709 : DRAFT 2017 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - PRECOMMISSIONING INSPECTION AND INSTRUCTIONS FOR MAINTENANCE AND OPERATIONAL INSPECTION |
PREN 12927-5 : DRAFT 1997 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - ROPES - PART 5: STORAGE, TRANSPORTATION, INSTALLATION & TENSIONING |
PREN 45545-6 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 6: FIRE CONTROL AND MANAGEMENT SYSTEMS |
EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
ENV 1907 : 1999 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORTATION BY ROPE - TERMINOLOGY |
PREN 13223 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - DRIVE SYSTEMS AND OTHER MECHANICAL EQUIPMENT |
EN 50264-1:2008 | Railway applications - Railway rolling stock power and control cables having special fire performance - Part 1: General requirements |
PREN 45545-1 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 1: GENERAL |
PREN 12927-3 : DRAFT 1997 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORT BY ROPE - ROPES - PART 3: LONG SPLICING OF A 6 STRAND HAULING, CARRYING-HAULING AND TOWING ROPES |
PREN 12397 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - OPERATION |
EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
ENV 13381-3:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 3: Applied protection to concrete members |
PREN 45545-2 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 2: REQUIREMENTS FOR FIRE BEHAVIOUR OF MATERIALS AND COMPONENTS |
EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
ISO 11925-3:1997 | Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 3: Multi-source test |
ENV 1996-1-2 : 1995 | EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
PREN 12927-1 : DRAFT 1997 | SAFETY REQUIREMENTS FOR PASSENGER TRANSPORT BY ROPE - ROPES - PART 1: SELECTION CRITERIA FOR ROPES AND THEIR END FIXINGS |
EN 671-3:2009 | Fixed firefighting systems - Hose systems - Part 3: Maintenance of hose reels with semi-rigid hose and hose systems with lay-flat hose |
IEC 60331-21:1999 | Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV |
EN 13501-3:2005+A1:2009 | Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers |
EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
PREN 13107 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CIVIL ENGINEERING WORKS |
EN 14135:2004 | Coverings - Determination of fire protection ability |
ENV 13381-7:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 7: Applied protection to timber members |
ENV 1993-1-2 : DRAFT 95 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
ENV 13381-5:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members |
PREN 13243 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - ELECTRICAL EQUIPMENT OTHER THAN FOR DRIVE SYSTEMS |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
PREN 12930 : DRAFT 2013 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CALCULATIONS |
PREN 45545-7 : DRAFT 2010 | RAILWAY APPLICATIONS - FIRE PROTECTION ON RAILWAY VEHICLES - PART 7: FIRE SAFETY REQUIREMENTS FOR FLAMMABLE LIQUID AND FLAMMABLE GAS INSTALLATIONS |
ISO/TR 11925-1:1999 | Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
ENV 1995-1-2 : DRAFT 94 | EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
ENV 13381-6:2002 | Test methods for determining the contribution to the fire resistance of structural members - Part 6: Applied protection to concrete filled hollow steel columns |
PREN 13796-3 : DRAFT 2012 | SAFETY REQUIREMENTS FOR CABLEWAY INSTALLATIONS DESIGNED TO CARRY PERSONS - CARRIERS - PART 3: FATIGUE TESTING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.