PD 8010-1:2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Code of practice for pipelines Steel pipelines on land
Superseded date
03-31-2015
Superseded by
Published date
07-30-2004
Publisher
Sorry this product is not available in your region.
Committees responsible
Foreword
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Health, safety and assurance
5 Design - System and safety
6 Design - Mechanical integrity
7 Design - Stations and terminals
8 Design - Materials and coatings
9 Design - Corrosion management
10 Construction - Fabrication and installation
11 Construction - Testing
12 Pre-commissioning and commissioning
13 Operation, maintenance and integrity assurance management
14 Abandonment
Annex A (informative) Extent of pipeline systems for conveying oil
and gas that are covered by this part of PD 8010
Annex B (informative) Quality assurance
Annex C (normative) Records and document control
Annex D (informative) Hazards in pipeline design
Annex E (normative) Safety evaluation of pipelines
Annex F (normative) Pipeline route selection
Annex G (normative) Loads
Annex H (informative) Buckling
Annex I (informative) Planning and legal
Bibliography
Provides recommendations for and guidance on the design, selection, specification and use of materials, routing, land acquisition, construction, installation, testing, operation, maintenance and abandonment of land pipeline systems constructed from steel.
| Committee |
PSE/17/2
|
| DevelopmentNote |
Supersedes 02/710817 DC. (08/2004) Included in BS KIT 142 (09/2004) Reviewed and confirmed by BSI, January 2010. (12/2009)
|
| DocumentType |
Standard
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| 07/30138021 DC : 0 | PD 8010-3 - CODE OF PRACTICE FOR PIPELINES - PART 3: GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR HAZARD PIPELINES |
| UNI CEN ISO/TS 12747 : 2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - RECOMMENDED PRACTICE FOR PIPELINE LIFE EXTENSION |
| BS CP2010-2(1970) : 1970 | PIPELINES - PART 2: DESIGN AND CONSTRUCTION OF STEEL PIPELINES IN LAND |
| S.R. CEN ISO/TS 12747:2013 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - RECOMMENDED PRACTICE FOR PIPELINE LIFE EXTENSION (ISO/TS 12747:2011) |
| 12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
| PD 8010-4:2012 | Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management |
| BS 4515-1:2004 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| BS 4515-1:2009 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| 14/30286899 DC : 0 | PD 8010-2 - PIPELINE SYSTEMS - PART 2: SUBSEA PIPELINES - CODE OF PRACTICE |
| 11/30201808 DC : 0 | BS PD 8010-4 - CODE OF PRACTICE FOR PIPELINES - PART 4: RISK-BASED INTEGRITY MANAGEMENT OF STEEL PIPELINES ON LAND AND SUB SEA PIPELINES |
| BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| PD CEN ISO/TS 12747:2013 | Petroleum and natural gas industries. Pipeline transportation systems. Recommended practice for pipeline life extension |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| BS PD8010-3(2009) : 2009 | PIPELINE SYSTEMS - PART 3: STEEL PIPELINES ON LAND - GUIDE TO THE APPLICATION OF PIPELINE RISK ASSESSMENT TO PROPOSED DEVELOPMENTS IN THE VICINITY OF MAJOR ACCIDENT HAZARD PIPELINES CONTAINING FLAMMABLES - SUPPLEMENT TO PD 8010-1:2004 |
| ISO/TS 12747:2011 | Petroleum and natural gas industries Pipeline transportation systems Recommended practice for pipeline life extension |
| CEN ISO/TS 12747:2013 | Petroleum and natural gas industries - Pipeline transportation systems - Recommended practice for pipeline life extension (ISO/TS 12747:2011) |
| BS 5555:1993 | Specification for SI units and recommendations for the use of their multiples and of certain other units |
| BS 7867:1997 | Specification for portable fire extinguishers for use in aircraft |
| 96/101548 DC : DRAFT MAR 1996 | BS EN 12336 TUNNELLING MACHINES - SHIELD MACHINES, HORIZONTAL THRUST-BORING MACHINES, LINING ERECTION EQUIPMENT - SAFETY REQUIREMENTS |
| BS 5607:1998 | Code of practice for the safe use of explosives in the construction industry |
| BS ISO 3183-3:1999 | Petroleum and natural gas industries. Steel pipe for pipelines. Technical delivery conditions Pipes of requirement class C |
| BS 7910:1999 | Guide on methods for assessing the acceptability of flaws in metallic structures |
| ISO 15590-1:2009 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
| BS EN 1295-1 : 1998 | STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 1: GENERAL REQUIREMENTS |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 14313:2007 | Petroleum and natural gas industries — Pipeline transportation systems — Pipeline valves |
| ASME B31.8 : 2016 | Gas Transmission and Distribution Piping Systems |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| BS 6100-2.2.3:1990 | Glossary of building and civil engineering terms. Civil engineering. Substructures. Earthworks. Foundations. Tunnels Tunnels |
| BS EN 815 : 1997 | SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK - SAFETY REQUIREMENTS |
| ASME B31.3:2016 | PROCESS PIPING |
| BS 3618-3:1971 | Glossary of mining terms Boring and exploration |
| BS 4515-1:2000 | Specification for welding of steel pipelines on land and offshore Carbon and carbon manganese steel pipelines |
| BS 6031:1981 | Code of practice for earthworks |
| BS 5949:1980 | Specification for asbestos-cement pipes and joints for thrust-boring and pipe jacking |
| ISO 3183-2:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 2: Pipes of requirements class B |
| BS EN 10224:2002 | Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids. Technical delivery conditions |
| ASME B16.20 : 2012 | METALLIC GASKETS FOR PIPE FLANGES |
| BS EN ISO 14001:2015 | Environmental management systems. Requirements with guidance for use |
| BS EN 60079-10:2003 | Electrical apparatus for explosive gas atmospheres Classification of hazardous areas |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| NACE MR 01 75 : 2003 | METALS FOR SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING RESISTANCE IN SOUR OILFIELD ENVIRONMENTS |
| BS EN 1594:2013 | Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements |
| BS 7572:1992 | Code of practice for thermally insulated underground piping systems |
| BS EN 12110:2014 | Tunnelling machines. Air locks. Safety requirements |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| BS EN 12111:2014 | Tunnelling machines. Road headers and continuous miners. Safety requirements |
| BS ISO 15649:2001 | Petroleum and natural gas industries. Piping |
| BS EN 295-7:2013 | Vitrified clay pipe systems for drains and sewers Requirements for pipes and joints for pipe jacking |
| ISO 10474:2013 | Steel and steel products — Inspection documents |
| MSS SP 44 : 2016 | STEEL PIPELINE FLANGES |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.21 : 2016 | NONMETALLIC FLAT GASKETS FOR PIPE FLANGES |
| ISO 3183-1:1996 | Petroleum and natural gas industries — Steel pipe for pipelines — Technical delivery conditions — Part 1: Pipes of requirement class A |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| BS 3618-8:1974 | Glossary of mining terms Winning and working |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| BS EN 14161 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| API 579-1 : 2016 | FITNESS-FOR-SERVICE |
| BS 3293:1960 | Specification for carbon steel pipe flanges (over 24 inches nominal size) for the petroleum industry |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| BS 4515-2:1999 | Specification for welding of steel pipelines on land and offshore Duplex stainless steel pipelines |
| BS 5911-120:1989 | Precast concrete pipes, fittings and ancillary products Specification for reinforced jacking pipes with flexible joints |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| BS 7361-1:1991 | Cathodic protection Code of practice for land and marine applications |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
| BS EN 10204:2004 | Metallic products. Types of inspection documents |
| 1994/9/EC : 1994 | DIRECTIVE 94/9/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL OF 23 MARCH 1994 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING EQUIPMENT AND PROTECTIVE SYSTEMS INTENDED FOR USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.