PD 6697:2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2
Available format(s)
Hardcopy , PDF
Superseded date
07-19-2019
Superseded by
Language(s)
English
Published date
11-30-2010
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Materials and components
6 Design
7 Lintels: method of assessment of load
8 Work on site
Bibliography
This Published Document contains non-contradictory complementary information and additional guidance for use in the UK with BS EN 1996-1-1 and BS EN 1996-2.
| Committee |
B/525/6
|
| DevelopmentNote |
Together with BS EN 1996-1-1, BS EN 1996-2 and BS EN 1996-3, it supersedes BS 5628-1(2005) and BS 5628-2(2005). Together with BS EN 1996-1-2, BS EN 1996-2 and BS EN 1996-3, it supersedes BS 5628-3(2005). Supersedes 10/30168896 DC. (11/2010)
|
| DocumentType |
Standard
|
| Pages |
108
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Published Document contains non-contradictory complementary information and additional guidance for use in the UK with BS EN 1996-1-1 and BS EN 1996-2.
BS EN 1996-1-2 and BS EN 1996-3 are not specifically dealt with, but this Published Document may be relevant.
Most of the material in this Published Document is taken from those parts of BS 5628-1, BS 5628-2, BS 5628-3 and BS 5977-2 that were not contradictory to the new BS EN 1996 series, but had to be withdrawn when those British Standards were withdrawn.
This Published Document does not cover the detailing of components for seismic design.
| BS EN 1996-1-1 NA : 2005 | UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS 5502-22(2003) : 2003 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
| BS 8004:2015 | Code of practice for foundations |
| BS 6093(2006) : 2006 | DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE |
| BS 8002:2015 | Code of practice for earth retaining structures |
| 11/30214388 DC : 0 | BS 8103-1 - STRUCTURAL DESIGN OF LOW-RISE BUILDINGS - PART 1: CODE OF PRACTICE FOR STABILITY, SITE INVESTIGATION, FOUNDATIONS AND GROUND FLOOR SLABS FOR HOUSING |
| BS 8103-1:2011 | Structural design of low-rise buildings Code of practice for stability, site investigation, foundations, precast concrete floors and ground floor slabs for housing |
| 13/30260276 DC : 0 | BS 5642-2:1983+A1 - SILLS AND COPINGS - PART 2: SPECIFICATION FOR COPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| 12/30256518 DC : 0 | BS EN 1996-1-1 - UK NATIONAL ANNEX TO EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| 12/30254626 DC : 0 | PD 6693-1 - RECOMMENDATIONS FOR THE DESIGN OF STRUCTURES TO BS EN 1995 EUROCODE 5 FOR TIMBER STRUCTURES (REVISION OF BS 5268) |
| PD 6693-1:2012 | Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings |
| 15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
| BS 8610:2017 | Personal fall protection equipment. Anchor systems. Specification |
| BS EN 771-1 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS |
| BS EN 771-2 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS |
| BS 8103-2:2013 | Structural design of low-rise buildings Code of practice for masonry walls for housing |
| EN 771-2:2011+A1:2015 | Specification for masonry units - Part 2: Calcium silicate masonry units |
| EN 771-1:2011+A1:2015 | Specification for masonry units - Part 1: Clay masonry units |
| 13/30262014 DC : 0 | BS 8103-2 - STRUCTURAL DESIGN OF LOW RISE BUILDINGS - PART 2: CODE OF PRACTICE FOR MASONRY WALLS FOR HOUSING |
| 13/30277948 DC : 0 | BS 6093:2006+A1 - DESIGN OF JOINTS AND JOINTING IN BUILDING CONSTRUCTION - GUIDE |
| BS 5250(2011) : 2011 | CODE OF PRACTICE FOR CONTROL OF CONDENSATION IN BUILDINGS |
| BS EN 13914-1:2016 | Design, preparation and application of external rendering and internal plastering External rendering |
| BS EN 771-5 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS |
| BS EN 1996-2 NA : 2006 | UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 2: DESIGN CONSIDERATIONS, SELECTION OF MATERIALS AND EXECUTION OF MASONRY |
| BS EN 15287-1 : 2007 | CHIMNEYS - DESIGN, INSTALLATION AND COMMISSIONING OF CHIMNEYS - PART 1: CHIMNEYS FOR NON-ROOMSEALED HEATING APPLIANCES |
| BS 5977-2:1983 | Lintels Specification for prefabricated lintels |
| BS EN 771-3 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
| BS EN 1996-1-1 NA : 2005 | UK NATIONAL ANNEX TO EUROCODE 6: DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS EN 13139:2013 | Aggregates for mortar |
| BS EN 988:1997 | Zinc and zinc alloys. Specification for rolled flat products for building |
| BS EN 13162 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS DD86-1(1983) : 1983 | DAMP-PROOF COURSES - METHODS OF TEST FOR FLEXURAL BOND STRENGTH AND SHORT TERM SHEAR STRENGTH |
| BS EN 13167 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| BS EN 1996-1-2:2005 | Eurocode 6. Design of masonry structures General rules. Structural fire design |
| BS EN 845-2 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
| BS 1186-2:1988 | Timber for and workmanship in joinery Specification for workmanship |
| BS EN 13164 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| BS 4486:1980 | Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete |
| BS DD86-2(1984) : 1984 | DAMP-PROOF COURSES - METHOD OF TEST FOR CREEP DEFORMATION |
| BS EN ISO 11600 : 2003 | BUILDING CONSTRUCTION - JOINTING PRODUCTS - CLASSIFICATION AND REQUIREMENTS FOR SEALANTS |
| BS EN 1052-4:2000 | Methods of test for masonry Determination of shear strength including damp proof course |
| BS EN 934-3 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
| BS EN 845-3 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK |
| BS 8104:1992 | Code of practice for assessing exposure of walls to wind-driven rain |
| BS EN 206-1:2000 | Concrete Specification, performance, production and conformity |
| BS EN 1052-1:1999 | Methods of test for masonry Determination of compressive strength |
| BS 6515:1984 | Specification for polyethylene damp-proof courses for masonry |
| BS EN 13165 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| BS EN 1996-3:2006 | Eurocode 6. Design of masonry structures Simplified calculation methods for unreinforced masonry structures |
| BS EN 1992-1-1 : 2004 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| BS EN 12620:2013 | Aggregates for concrete |
| BS EN 459-1:2015 | Building lime Definitions, specifications and conformity criteria |
| BS 493(1995) : 1995 | SPECIFICATION FOR AIRBRICKS AND GRATINGS FOR WALL VENTILATION |
| BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 5896:1980 | Specification for high tensile steel wire and strand for the prestressing of concrete |
| BS EN 12588:2006 | Lead and lead alloys. Rolled lead sheet for building purposes |
| BS EN 771-2 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS |
| BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
| BS 7456:1991 | Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems |
| BS 5617:1985 | Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
| BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
| BS EN 1996-2:2006 | Eurocode 6. Design of masonry structures Design considerations, selection of materials and execution of masonry |
| BS 8215:1991 | Code of practice for design and installation of damp-proof courses in masonry construction |
| BS 4729(2005) : 2005 | CLAY BRICKS OF SPECIAL SHAPES AND SIZES - RECOMMENDATIONS |
| BS EN 13163 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| BS EN 1990 NA : 2002 + A1 : 2005 | UK NATIONAL ANNEX FOR EUROCODE - BASIS OF STRUCTURAL DESIGN |
| BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
| BS 8000-16(1997) : 1997 | WORKMANSHIP ON BUILDING SITES - PART 16: CODE OF PRACTICE FOR SEALING JOINTS IN BUILDINGS USING SEALANTS |
| BS EN 942:2007 | Timber in joinery. General requirements |
| BS EN 490 : 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
| BS EN 1304:2013 | Clay roofing tiles and fittings. Product definitions and specifications |
| BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
| BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
| BS 1186-3:1990 | Timber for and workmanship in joinery Specification for wood trim and its fixing |
| BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
| BS 6398:1983 | Specification for bitumen damp-proof courses for masonry |
| BS 743:1970 | Specification for materials for damp-proof courses |
| BS EN 1996-1-1 : 2005 | EUROCODE 6 - DESIGN OF MASONRY STRUCTURES - PART 1-1: GENERAL RULES FOR REINFORCED AND UNREINFORCED MASONRY STRUCTURES |
| BS EN 845-1 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
| BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
| BS 6213(2000) : 2000 | SELECTION OF CONSTRUCTION SEALANTS - GUIDE |
| BS EN 13166 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
| BS DD86-3(1990) : 1990 | DAMP-PROOF COURSES - GUIDE TO CHARACTERISTIC STRENGTHS OF DAMP-PROOF COURSE MATERIAL USED IN MASONRY |
| BS EN 1990:2002+A1:2005 | Eurocode. Basis of structural design |
| BS 5618:1985 | Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems |
| BS EN 14411:2012 | Ceramic tiles. Definitions, classification, characteristics, evaluation of conformity and marking |
| BS EN 771-1 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS |
| BS EN 771-6 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| BS 6925:1988 | Specification for mastic asphalt for building and civil engineering (limestone aggregate) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.