PD 54823:2016
Current
The latest, up-to-date edition.
Guidance for the design, commissioning and maintenance of LPG systems in small craft
Hardcopy , PDF
English
03-31-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Pressure regulation devices
6 LPG supply line
7 Appliances
8 Location and installation of LPG cylinders
9 Ventilation
10 LPG installation tightness tests
11 Electrical devices for ignition sources
12 Owners manual
13 Ducts and flues for air intake and
combustion product discharge
14 Commissioning and maintenance tests
Annexes
Annex A - Cooking appliances with integral LPG
cartridges with a capacity of 225 g or less
Annex B - Design guidelines for pressure
drop due to pipe resistance
Annex C - Area of fixed ventilation
Annex D - Testing of the LPG supply line
and appliances
Annex E - Information and instructions for
emergency procedures and safe usage
Annex F - Test of flue performance for an
appliance flue incorporating a draught
diverter
Annex G - LPG system tightness test using
a bubble tester
Annex H - Testing pressure regulation device
and appliance operating pressure
Bibliography
Provides guidance for the design, commissioning and maintenance of LPG (liquefied petroleum gas) systems, including replacement appliances, replacement hose and replacement piping.
| Committee |
GME/33
|
| DevelopmentNote |
Supersedes BS PD5482-3(2005) & 15/30281782 DC. (04/2016)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This Published Document gives guidance for the design, commissioning and maintenance of LPG (liquefied petroleum gas) systems, including replacement appliances, replacement hose and replacement piping. It covers permanently installed gas burning installations in small craft 1) of up to 24m in length, using LPG operating at a nominal pressure of up to 50 mbar 2) . The LPG is from either cyclinders stowed on board or the on-board aspects of the gas system in the situation of a fixed shore bulk supply. This Published Document also covers cooking appliances with integral LPG cartridges, for which guidence is given in AnnexA. This Published Document does not cover: new system installation requirements as covered in BSENISO10239:2014 ; major system modification for which BSENISO10239:2014 is to be used for installation requirements; additional appliances (including additional piping and additional hose) added to an existing system for which BSENISO10239:2014 is to be used for installation requirements; on-shore installation of bulk supplies of LPG; catering equipment; portable LPG-burning appliances not covered in AnnexA; the installation of LPG generators; or the use of LPG for propulsion of vessels for which guidance is given in UKLPG Code of Practice 18 [6] or BSEN15609 . NOTE Further information on gas supply systems to permanently moored craft can be found in IGEM/G/6 [7].
| BS EN 437 : 2003 | TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES |
| BS EN ISO 10380:2012 | Pipework. Corrugated metal hoses and hose assemblies |
| BS EN 1949 : 2011 | SPECIFICATION FOR THE INSTALLATION OF LPG SYSTEMS FOR HABITATION PURPOSES IN LEISURE ACCOMMODATION VEHICLES AND ACCOMMODATION PURPOSES IN OTHER VEHICLES |
| BS 3016:1989 | Specification for pressure regulators for liquefied petroleum gases |
| BS EN 16129:2013 | Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, with a maximum capacity of 150 kg/h, associated safety devices and adaptors for butane, propane, and their mixtures |
| BS EN ISO 10239:2017 | Small craft. Liquefied petroleum gas (LPG) systems |
| BS EN 751-2:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Non-hardening jointing compounds |
| BS EN 14291:2004 | Foam producing solutions for leak detection on gas installations |
| BS EN 15266:2007 | Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| BS EN ISO 10240 : 2004 | SMALL CRAFT - OWNER'S MANUAL |
| BS EN 13786 : 2004 | AUTOMATIC CHANGE-OVER VALVES HAVING A MAXIMUM OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 1057 : 2006 | COPPER AND COPPER ALLOYS - SEAMLESS, ROUND COPPER TUBES FOR WATER AND GAS IN SANITARY AND HEATING APPLICATIONS |
| BS EN 14324:2004 | Brazing. Guidance on the application of brazed joints |
| BS EN 449 : 2002 | SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES - DOMESTIC FLUELESS SPACE HEATERS (INCLUDING DIFFUSIVE CATALYTIC COMBUSTION HEATERS) |
| BS EN 549:1995 | Specification for rubber materials for seals and diaphragms for gas appliances and gas equipment |
| BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| BS EN 28846:1993 | Small craft. Electrical devices. Protection against ignition of surrounding flammable gases |
| BS EN 751-3:1997 | Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water Unsintered PTFE tapes |
| BS 5258-11:1980 | Safety of domestic gas appliances Flueless catalytic combustion heaters (3rd family gases) |
| BS EN 1254-2:1998 | Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes |
| BS 7838:1996 | Specification for corrugated stainless steel semi-rigid pipe and associated fittings for low-pressure gas pipework of up to DN 50 |
| BS EN 12449:2016 | Copper and copper alloys. Seamless, round tubes for general purposes |
| BS EN 13785 : 2005 | REGULATORS WITH A CAPACITY OF UP TO AND INCLUDING 100 KG/H, HAVING A MAXIMUM NOMINAL OUTLET PRESSURE OF UP TO AND INCLUDING 4 BAR, OTHER THAN THOSE COVERED BY EN 12864 AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS 3212:1991 | Specification for flexible rubber tubing, rubber hose and rubber hose assemblies for use in LPG vapour phase and LPG/air installations |
| BS EN 837-1:1998 | Pressure gauges Bourdon tube pressure gauges. Dimensions, metrology, requirements and testing |
| BS EN 15609:2012 | LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft |
| ISO 7598:1988 | Stainless steel tubes suitable for screwing in accordance with ISO 7-1 |
| BS 8511:2010 | Code of practice for the installation of solid fuel heating and cooking appliances in small craft |
| BS EN 13878:2003 | Leisure accommodation vehicles. Terms and definitions |
| BS EN 12864 : 2001 | LOW-PRESSURE, NON ADJUSTABLE REGULATORS HAVING A MAXIMUM OUTLET PRESSURE OF LESS THAN OR EQUAL TO 200 MBAR, WITH A CAPACITY OF LESS THAN OR EQUAL TO 4 KG/H, AND THEIR ASSOCIATED SAFETY DEVICES FOR BUTANE, PROPANE OR THEIR MIXTURES |
| BS EN 331:2015 | Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings |
| BS 669-1:1989 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for strip-wound metallic flexible hoses, covers, end fittings and sockets for domestic appliances burning 1st and 2nd family gases |
| BS EN ISO 17672:2016 | Brazing. Filler metals |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| BS 669-2:1997 | Flexible hoses, end fittings and sockets for gas burning appliances Specification for corrugated metallic flexible hoses, covers, end fittings and sockets for catering appliances burning 1st, 2nd and 3rd family gases |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.