ONORM EN ISO 10524-1 : 2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
PRESSURE REGULATORS FOR USE WITH MEDICAL GASES - PART 1: PRESSURE REGULATORS AND PRESSURE REGULATORS WITH FLOW-METERING DEVICES
07-15-2019
01-12-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Nomenclature
5 General requirements
5.1 Safety
5.2 Alternative construction
5.3 Materials
5.4 Design requirements
5.5 Constructional requirements
6 Test methods
6.1 General
6.2 Test methods for outlet pressure
6.3 Test method for pressure-relief valve
6.4 Test methods for leakage
6.5 Test method for mechanical strength
6.6 Test method for resistance to ignition
6.7 Test method for accuracy of flow of pressure
regulators fitted with flowmeters or flowgauges
6.8 Test method for the stability of flow of pressure
regulators fitted with flowmeters or flowgauges
6.9 Test method for stability and accuracy of flow of
pressure regulators fitted with fixed orifices
6.10 Test method for flow setting and loosening torques
6.11 Test method for durability of markings and colour
coding
7 Marking, colour coding, packaging
7.1 Marking
7.2 Colour coding
7.3 Packaging
8 Information to be supplied by the manufacturer
Annex A (informative) Typical examples of pressure regulators
and pressure regulators with flow-metering
devices
Annex B (informative) Rationale
Annex C (informative) Reported regional and national deviations
of colour coding and nomenclature for
medical gases
Bibliography
ANNEX ZA (informative) Relationship between this European
Standard and the Essential Requirements
of EU Directive 93/42 EEC concerning
Medical Devices
Applies to the types of pressure regulators listed and is intended for the administration of the following medical gases in the treatment, management, diagnostic evaluation and care of patients: - oxygen; - nitrous oxide; - air for breathing; - helium; - carbon dioxide; - xenon; - mixtures of the gases listed above; - air for driving surgical tools; - nitrogen for driving surgical tools.
DevelopmentNote |
Supersedes ONORM EN 738-1 (05/2006)
|
DocumentType |
Standard
|
PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
Status |
Withdrawn
|
SupersededBy |
Standards | Relationship |
NF EN ISO 10524-1 : 2006 | Identical |
NBN EN ISO 10524-1 : 2006 | Identical |
DIN EN ISO 10524-1:2006-05 | Identical |
NEN EN ISO 10524-1 : 2006 | Identical |
I.S. EN ISO 10524-1:2006 | Identical |
EN ISO 10524-1:2019 | Identical |
EN ISO 10524-1:2006 | Identical |
UNI EN ISO 10524-1 : 2006 | Identical |
ISO 10524-1:2006 | Identical |
NS EN ISO 10524-1 : 1ED 2006 | Identical |
SN EN ISO 10524-1 : 2006 | Identical |
UNE-EN ISO 10524-1:2007 | Identical |
BS EN ISO 10524-1:2006 | Identical |
ONORM EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
ONORM EN 1789 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - ROAD AMBULANCES |
ONORM EN 13718-2 : 2015 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS FOR AIR AMBULANCES |
ONORM EN 13544-3 : 2010 | RESPIRATORY THERAPY EQUIPMENT - PART 3: AIR ENTRAINMENT DEVICES |
ONORM EN 794-3 : 2010 | LUNG VENTILATORS - PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS |
ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
ISO 5145:2014 | Cylinder valve outlets for gases and gas mixtures Selection and dimensioning |
ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
ISO 407:2004 | Small medical gas cylinders Pin-index yoke-type valve connections |
ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
ISO 14971:2007 | Medical devices Application of risk management to medical devices |
EN 13544-2:2002+A1:2009 | Respiratory therapy equipment - Part 2: Tubing and connectors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.