ONORM EN 15001-1 : 2011
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
Superseded date
08-17-2023
Superseded by
Published date
01-12-2013
Sorry this product is not available in your region.
| DocumentType |
Standard
|
| PublisherName |
Osterreichisches Normungsinstitut/Austrian Standards
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| EN 15001-1:2009 | Identical |
| ONORM EN 1514-2 : 2014 | FLANGES AND THEIR JOINTS - GASKETS FOR PN-DESIGNATED FLANGES - PART 2: SPIRAL WOUND GASKETS FOR USE WITH STEEL FLANGES |
| ONORM EN 1254-5 : 1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 5: FITTINGS WITH SHORT ENDS FOR CAPILLARY BRAZING TO COPPER TUBES |
| ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| ISO 17672:2016 | Brazing — Filler metals |
| ONORM EN ISO 5817 : 2014 | WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS (ISO 5817:2014) |
| ONORM EN 10088-3 : 2014 | STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
| ISO 15348:2002 | Pipework Metal bellows expansion joints General |
| ONORM EN ISO 17672 : 2017 | BRAZING - FILLER METALS (ISO 17672:2016) |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ONORM EN 437 : 2009 | TEST GASES - TEST PRESSURES - APPLIANCE CATEGORIES |
| ONORM EN ISO 6892-1 : 2017 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
| ONORM EN 751-3 : 1997 AC 1997 | SEALING MATERIALS FOR METALLIC THREADED JOINTS IN CONTACT WITH 1ST, 2ND AND 3RD FAMILY GASES AND HOT WATER - PART 3: UNSINTERED PTFE TAPES |
| ISO 15610:2003 | Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
| ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ONORM EN 13480-2 : 2017 | METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS |
| ONORM EN 1555-2 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 2: PIPES |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ONORM EN 1563 : 2012 | FOUNDING - SPHEROIDAL GRAPHITE CAST IRONS |
| ONORM EN 1555-3 : 2013 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 3: FITTINGS |
| ONORM EN 1254-1 : 1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES |
| ONORM EN 12954 : 2001 | CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
| ONORM EN 13480-6 : 2017 | METALLIC INDUSTRIAL PIPING - PART 6: ADDITIONAL REQUIREMENTS FOR BURIED PIPING |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ONORM EN 1254-2 : 1998 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES |
| ISO 15612:2004 | Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
| ONORM EN 1555-1 : 2015 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 1: GENERAL |
| ONORM EN 10253-2 : 2008 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| ISO 5817:2014 | Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
| ISO 15614-1:2017 | Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
| ISO 15609-1:2004 | Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
| ONORM EN 1555-4 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 4: VALVES |
| ONORM EN ISO 15609-1 : 2005 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| ISO 9329-2:1997 | Seamless steel tubes for pressure purposes — Technical delivery conditions — Part 2: Unalloyed and alloyed steels with specified elevated temperature properties |
| ONORM EN ISO 15610 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON TESTED WELDING CONSUMABLES |
| ONORM EN 10217-1 : 2007 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| ONORM EN 1594 : 2013 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS |
| ONORM EN ISO 15612 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
| ONORM EN 13445-6 : 2017 | UNFIRED PRESSURE VESSELS - PART 6: REQUIREMENTS FOR THE DESIGN AND FABRICATION OF PRESSURE VESSELS AND PRESSURE PARTS CONSTRUCTED FROM SPHEROIDAL GRAPHITE CAST IRON (EN 13445-6:2014-09, ISSUE 3:2016-07) |
| ONORM EN ISO 15607 : 2004 | SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - GENERAL RULES |
| ONORM EN 1555-5 : 2011 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ONORM EN 10088-1 : 2014 | STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
| ONORM EN 1514-1 : 1997 | FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKET FOR PN-DESIGNATED FLANGES - PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS |
| EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
| ONORM EN 10217-7 : 2014 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
| ONORM EN 1092-1 : JUL 2014 | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| ONORM EN 12732 : JUL 2014 | GAS INFRASTRUCTURE - WELDING STEEL PIPEWORK - FUNCTIONAL REQUIREMENTS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ONORM EN 12068 : 2000 | CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
| ONORM EN 10216-5 : 2014 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.