NS EN 1999-1-5 : 2007 + NA 2010

Foreword
National Annex for EN 1999-1-5
1 General
  1.1 Scope
      1.1.1 Scope of EN 1999
      1.1.2 Scope of EN 1999-1-5
  1.2 Normative references
  1.3 Terms and definitions
      1.3.1 Structural forms and geometry
      1.3.2 Special definitions for buckling calculations
  1.4 Symbols
  1.5 Sign conventions
  1.6 Coordinate systems
2 Basis of design
  2.1 General
  2.2 Consequence class and execution class
3 Materials and geometry
  3.1 Material properties
  3.2 Design values of geometrical data
  3.3 Geometrical tolerances and geometrical imperfections
4 Durability
5 Structural analysis
  5.1 Geometry
  5.2 Boundary conditions
  5.3 Actions and environmental influences
  5.4 Stress resultants and stresses
  5.5 Types of analysis
6 Ultimate limit state
  6.1 Resistance of cross section
      6.1.1 Design values of stresses
      6.1.2 Design values of resistance
      6.1.3 Stress limitation
      6.1.4 Design by numerical analysis
  6.2 Buckling resistance
      6.2.1 General
      6.2.2 Buckling-relevant geometrical tolerances
      6.2.3 Shell in compression and shear
      6.2.4 Effect of welding
      6.2.5 Design by numerical analysis
7 Serviceability limit states
  7.1 General
  7.2 Deflections
Annex A [normative] - Expressions for shell buckling analysis
  A.1 Unstiffened cylindrical shells of constant wall thickness
      A.1.1 Notations and boundary conditions
      A.1.2 Meridional (axial) compression
            A.1.2.1 Critical meridional buckling stresses
            A.1.2.2 Meridional buckling parameter
      A.1.3 Circumferential (hoop) compression
            A.1.3.1 Critical circumferential buckling stresses
            A.1.3.2 Circumferential buckling parameter
      A.1.4 Shear
            A.1.4.1 Critical shear buckling stresses
            A.1.4.2 Shear buckling parameters
      A.1.5 Meridional (axial) compression with coexistent
            internal pressure
            A.1.5.1 Pressurised critical meridional buckling
                    stress
            A.1.5.2 Pressurised meridional buckling parameters
      A.1.6 Combinations of meridional (axial) compression,
            circumferential (hoop) compression and shear
  A.2 Unstiffened cylindrical shells of stepwise wall thickness
      A.2.1 General
            A.2.1.1 Notations and boundary conditions
            A.2.1.2 Geometry and joint offsets
      A.2.2 Meridional (axial) compression
      A.2.3 Circumferential (hoop) compression
            A.2.3.1 Critical circumferential buckling stresses
            A.2.3.2 Buckling strength verification for
                    circumferential compression
      A.2.4 Shear
            A.2.4.1 Critical shear buckling stress
            A.2.4.2 Buckling strength verification for shear
  A.3 Unstiffened lap jointed cylindrical shells
      A.3.1 General
            A.3.1.1 Definitions
            A.3.1.2 Geometry and stress resultants
      A.3.2 Meridional (axial) compression
      A.3.3 Circumferential (hoop) compression
      A.3.4 Shear
  A.4 Unstiffened conical shells
      A.4.1 General
            A.4.1.1 Notation
            A.4.1.2 Boundary conditions
            A.4.1.3 Geometry
      A.4.2 Design buckling stresses
            A.4.2.1 Equivalent cylinder
      A.4.3 Buckling strength verification
            A.4.3.1 Meridional compression
            A.4.3.2 Circumferential (hoop) compression
            A.4.3.3 Shear and uniform torsion
  A.5 Stiffened cylindrical shells of constant
      wall thickness
      A.5.1 General
      A.5.2 Isotropic walls with meridional stiffeners
            A.5.2.1 General
            A.5.2.2 Meridional (axial) compression
            A.5.2.3 Circumferential (hoop) compression
            A.5.2.4 Shear
      A.5.3 Isotropic walls with circumferential
            stiffeners
      A.5.4 Circumferentially corrugated walls with
            meridional stiffeners
            A.5.4.1 General
            A.5.4.2 Axial compression
            A.5.4.3 Stiffened wall treated as carrying axial
                    compression only in the stiffeners
            A.5.4.4 Circumferential (hoop) compression
      A.5.5 Axially corrugated walls with ring stiffeners
            A.5.5.1 General
            A.5.5.2 Axial compression
            A.5.5.3 Circumferential (hoop) compression
      A.5.6 Stiffened wall treated as an orthotropic shell
            A.5.6.1 General
            A.5.6.2 Axial compression
            A.5.6.3 Circumferential (hoop) compression
            A.5.6.4 Shear
      A.5.7 Equivalent orthotropic properties of
            corrugated sheeting
  A.6 Unstiffened spherical shells under uniform circumferential
      compression
      A.6.1 Notations and boundary conditions
      A.6.2 Critical buckling stresses
      A.6.3 Circumferential buckling parameter
Annex B [informative] - Expressions for buckling analysis of
        toriconical and torispherical shells
  B.1 General
  B.2 Notations and boundary conditions
  B.3 External pressure
      B.3.1 Critical external pressure
      B.3.2 Uniform squash limit external pressure
      B.3.3 External pressure buckling parameter
  B.4 Internal pressure
      B.4.1 Critical internal pressure
      B.4.2 Uniform squash limit internal pressure
      B.4.3 Internal pressure buckling parameter

Pertains to the structural design of aluminium structures, stiffened and unstiffened, that have the form of a shell of revolution or of a round panel in monocoque structures.