NF ISO 16110-1 : 2009
Current
The latest, up-to-date edition.
HYDROGEN GENERATORS USING FUEL PROCESSING TECHNOLOGIES - PART 1: SAFETY
01-12-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Exigences de sécurité et mesures de protection
4.1 Analyse de sécurité et de fiabilité
4.2 Configuration
4.3 Environnement physique et conditions de fonctionnement
4.4 Exigences de conception
4.5 Sélection des matériaux
4.6 Équipements sous pression et tuyaux
4.7 Prévention contre les phénomènes dangereux
d'incendie et d'explosion
4.8 Prévention des phénomènes dangereux électriques
4.9 Compatibilité électromagnétique (CEM)
4.10 Systèmes de controle et éléments de protection/sécurité
4.11 Appareils pneumatiques et hydrauliques
4.12 Vannes
4.13 Appareils rotatifs
4.14 Capotages
4.15 Systèmes et matériaux d'isolation thermique
4.16 Utilitaires
4.17 Installation et maintenance
5 Méthodes d'essai
5.1 Incertitudes de mesure
5.2 Carburants et pressions d'essai
5.3 Montages d'essai de base
5.4 Essais de type/qualification
5.5 Essais de routine
6 Marquage, étiquetage et emballage
6.1 Marquage du générateur d'hydrogène
6.2 Marquage des composants
6.3 Documentation technique du produit
Annexe A (informative) - Phénomènes dangereux et
situations dangereuses significatifs abordés
dans la présente Norme internationale
Annexe B (informative) - Carburation et compatibilité
matérielle avec l'utilisation d'hydrogène
Annexe C (informative) - Recyclage des générateurs
d'hydrogène
Annexe D (informative) - Considérations relatives à
l'installation des générateurs d'hydrogène
Bibliographie
La présente partie de l'ISO 16110 s'applique aux systèmes de génération d'hydrogène conditionnés, autonomes ou adaptables en sortie usine, d'une capacité inférieure à 400 m[3]/h à 0 degrés C et 101,325 kPa, appelés ci-après générateurs d'hydrogène permettant de convertir un carburant d'entrée en gaz riche en hydrogène, de composition et de conditions adaptées aux dispositifs fonctionnant à l'hydrogène (systèmes d'alimentation à pile à combustible ou systèmes de compression, de stockage et de distribution d'hydrogène, par exemple).
| DevelopmentNote |
Indice de classement: M58-002-1. PR NF ISO 16110-1 July 2009. (07/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| ISO 16110-1:2007 | Identical |
| NFM 58 003 : 2013 | INSTALLATION OF HYDROGEN-RELATED SYSTEMS |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO 13707:2000 | Petroleum and natural gas industries Reciprocating compressors |
| ISO 12499:1999 | Industrial fans Mechanical safety of fans Guarding |
| IEC 60079-10:2002 | Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| IEC 60730-2-9:2015 RLV | Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements |
| IEC 61511-1:2016+AMD1:2017 CSV | Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and application programming requirements |
| IEC 61779-6:1999 | Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| ISO 13631:2002 | Petroleum and natural gas industries Packaged reciprocating gas compressors |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| IEC 60704-3:2006 | Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 3: Procedure for determining and verifying declared noise emission values |
| IEC 60730-2-6:2015 | Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| ISO/TS 16528:2002 | Boilers and pressure vessels Registration of Codes and Standards to promote international recognition |
| IEC 60335-2-51:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations |
| ISO 5388:1981 | Stationary air compressors Safety rules and code of practice |
| IEC 61000-6-3:2006+AMD1:2010 CSV | Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
| ISO 14847:1999 | Rotary positive displacement pumps Technical requirements |
| IEC 61779-4:1998 | Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit |
| IEC 61511-3:2016 | Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels |
| IEC 60146-1-1:2009 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 14121:1999 | Safety of machinery Principles of risk assessment |
| IEC TS 61000-3-4:1998 | Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
| IEC 60079-0:2011 | Explosive atmospheres - Part 0: Equipment - General requirements |
| IEC 60730-2-5:2013+AMD1:2017 CSV | Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems |
| IEC 62086-1:2001 | Electrical apparatus for explosive gas atmospheres - Electrical resistance trace heating - Part 1: General and testing requirements |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| ISO 10440-1:2007 | Petroleum, petrochemical and natural gas industries — Rotary-type positive-displacement compressors — Part 1: Process compressors |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| ISO 4080:2009 | Rubber and plastics hoses and hose assemblies — Determination of permeability to gas |
| IEC 60730-2-17:1997+AMD1:2000+AMD2:2007 CSV | Automatic electrical controls for household and similar use - Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements |
| IEC 60335-2-41:2012 | Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.