NF EN 61858 : 2009
Current
Current
The latest, up-to-date edition.
ELECTRICAL INSULATION SYSTEMS - THERMAL EVALUATION OF MODIFICATIONS TO AN ESTABLISHED WIRE-WOUND EIS
Published date
01-12-2013
Publisher
Sorry this product is not available in your region.
AVANT-PROPOS
INTRODUCTION
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Considérations générales
5 Évaluation de la modification d'épaisseur d'un
matériau d'isolation électrique
5.1 Echantillons
5.2 Acceptation
6 Substitution d'un enroulement à fil
6.1 Généralités
6.2 Substitution de l'émail
6.3 Substitution du matériau conducteur
6.4 Fil de bobinage de remplacement
7 Substitution de la résine et/ou du vernis d'imprégnation
7.1 Détermination de la classe thermique
7.2 Évaluation
8 Substitution d'autres matériaux d'isolation électrique
8.1 Matériaux techniquement équivalents
8.2 Évaluation prévisionnelle
8.3 Autres cas
9 Évaluation d'autres ajouts
9.1 Addition d'une résine et/ou d'un vernis d'imprégnation
9.2 Addition de composants
10 Essai de vieillissement thermique en un seul point
10.1 Éprouvettes
10.2 Indice d'endurance thermique relative du SIE (RTE
du SIE)
10.3 Interprétation des résultats
Annexe A (normative) Classes des fils de bobinage
Annexe B (normative) Procédure d'essai de compatibilité
Annexe ZA (normative) Références normatives à d'autres
publications internationales avec les publications
européennes correspondantes
Bibliographie
Gives the required test procedures for qualification of modifications of an established electrical insulation system (EIS) with respect to its thermal classification.
| DevelopmentNote |
Indice de classement: C26-315. Supersedes NFC 26 315. (06/2005) PR NF EN 61858 May 2008. (05/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 61858:2008 | Identical |
| UNE-EN 61858:2009 | Identical |
| DIN EN 61858 : 2009 | Identical |
| NBN EN 61858 : 2009 | Identical |
| BS EN 61858:2008 | Identical |
| IEC 61858:2008 | Identical |
| EN 61858:2008 | Identical |
| SN EN 61858 : 2008 | Identical |
| NF EN 60085 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| NF EN 62114 : 2002 | ELECTRICAL INSULATION SYSTEMS (EIS) - THERMAL CLASSIFICATION |
| IEC 60317-3:2004+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155 |
| IEC 60317-42:1997+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 42: Polyester-amide-imide enamelled round copper wire, class 200 |
| IEC 60317-7:1990+AMD1:1997+AMD2:1997 CSV | Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copper wire, class 220 |
| IEC 60317-15:2004+AMD1:2010 CSV | Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 |
| IEC 60317-51:2014 | Specifications for particular types of winding wires - Part 51: Solderable polyurethane enamelled round copper wire, class 180 |
| HD 555.16 : 200S2 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - POLYESTER ENAMELLED RECTANGULAR COPPER WINDING WIRE, CLASS 155 |
| IEC 60317-4:2015 | Specifications for particular types of winding wires - Part 4: Solderable polyurethane enamelled round copper wire, class 130 |
| NF EN 60085 : 2008 | ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION |
| NF EN 60216-5 : 2008 | ELECTRICAL INSULATING MATERIALS - THERMAL ENDURANCE PROPERTIES - PART 5: DETERMINATION OF RELATIVE THERMAL ENDURANCE INDEX (RTE) OF AN INSULATING MATERIAL |
| IEC 60317-21:2013 | Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 |
| NF EN 60317-29 : 1998 AMD 2 2011 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 29: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 200 |
| IEC 60317-47:2013 | Specifications for particular types of winding wires - Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 |
| NF EN 60317-20 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 20: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 155 |
| IEC 60317-19:1990+AMD1:1997+AMD2:1999 CSV | Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire, overcoated with polyamide, class 130 |
| NF EN 60317-15 : 2005 AMD 1 2010 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 15: POLYESTERIMIDE ENAMELLED ROUND ALUMINIUM WIRE, CLASS 180 |
| IEC 60317-8:2010 | Specifications for particular types of winding wires - Part 8: Polyesterimide enamelled round copper wire, class 180 |
| NF EN 60172 : 2015 | TEST PROCEDURE FOR THE DETERMINATION OF THE TEMPERATURE INDEX OF ENAMELLED AND TAPE WRAPPED WINDING WIRES |
| IEC 60317-34:1997 | Specifications for particular types of winding wires - Part 34: Polyester enamelled round copper wire, class 130L |
| IEC 60317-30:1990 | Specifications for particular types of winding wires. Part 30: Polyimide enamelled rectangular copper wire, class 220 |
| IEC 60505:2011 | Evaluation and qualification of electrical insulation systems |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 60317-23:2013 | Specifications for particular types of winding wires - Part 23: Solderable polyesterimide enamelled round copper wire, class 180 |
| NF EN 60505 : 2011 | EVALUATION AND QUALIFICATION OF ELECTRICAL INSULATION SYSTEMS |
| IEC 60172:2015 | Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires |
| IEC 61857-1:2008 | Electrical insulation systems - Procedures for thermal evaluation - Part 1: General requirements - Low-voltage |
| NF EN 61857-1 : 2009 | ELECTRICAL INSULATION SYSTEMS - PROCEDURES FOR THERMAL EVALUATION - PART 1: GENERAL REQUIREMENTS - LOW-VOLTAGE |
| NF EN 60317-22 : 2005 AMD 1 2010 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 22: POLYESTER OR POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 180 |
| IEC 60317-13:2010 | Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 |
| NF EN 60317-13 : 2012 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 13: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200 |
| IEC 60317-20:2013 | Specifications for particular types of winding wires - Part 20: Solderable polyurethane enamelled round copper wire, class 155 |
| NF EN 60317-47 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 47: AROMATIC POLYIMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 240 |
| NF EN 60317-23 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 23: SOLDERABLE POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180 |
| IEC 60317-25:2010 | Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 |
| NF EN 60317-8 : 2011 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 8: POLYESTERIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 180 |
| NF EN 61033 : 2007 | TEST METHODS FOR THE DETERMINATION OF BOND STRENGTH OF IMPREGNATING AGENTS TO AN ENAMELLED WIRE SUBSTRATE |
| IEC 60317-22:2004+AMD1:2009 CSV | Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 |
| IEC 60317-46:2013 | Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240 |
| IEC 60317-29:1990 | Specifications for particular types of winding wires. Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 |
| NF EN 60317-21 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 21: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 155 |
| NF EN 60317-51 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 51: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 180 |
| NF EN 60317-42 : 1998 AMD 1 2010 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 42: POLYESTER-AMIDE-IMIDE ENAMELLED ROUND COPPER WIRE, CLASS 200 |
| NF EN 60317-19 : 2001 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 19: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE OVERCOATED WITH POLYAMIDE, CLASS 130 |
| IEC 60216-5:2008 | Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative thermal endurance index (RTE) of an insulating material |
| NF EN 60317-4 : 2001 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 4: SOLDERABLE POLYURETHANE ENAMELLED ROUND COPPER WIRE, CLASS 130 |
| HD 555.7 : 200S2 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - POLYIMIDE ENAMELLED ROUND COPPER WINDING WIRE, CLASS 220 |
| IEC 61033:1991 | Test methods for the determination of bond strength of impregnating agents to an enamelled wire substrate |
| NF EN 60317-25 : 2012 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 25: POLYESTER OR POLYESTERIMIDE OVERCOATED WITH POLYAMIDE-IMIDE ENAMELLED ROUND ALUMINIUM WIRE, CLASS 200 |
| NF EN 60317-30 : 1998 AMD 2 2006 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 30: POLYAMIDE ENAMELLED RECTANGULAR COPPER WIRE, CLASS 220 |
| NF EN 60317-46 : 2014 | SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES - PART 46: AROMATIC POLYIMIDE ENAMELLED ROUND COPPER WIRE, CLASS 240 |
| IEC 60317-16:1990 | Specifications for particular types of winding wires. Part 16: Polyester enamelled rectangular copper wire, class 155 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.