NF EN 60603-7-4 : 2010
Current
The latest, up-to-date edition.
CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 7-4: DETAIL SPECIFICATION FOR 8-WAY, UNSHIELDED, FREE AND FIXED CONNECTORS, FOR DATA TRANSMISSIONS WITH FREQUENCIES UP TO 250 MHZ
01-12-2013
AVANT-PROPOS
INTRODUCTION
1 Généralités
1.1 Domaine d'application
1.2 Références normatives
2 Désignation de type CEI
2.1 Termes et définitions
3 Caractéristiques communes et vue isométrique
3.1 Vue isométrique
3.2 Informations relatives à l'accouplement
4 Sorties de câble et connexions internes - Embases et fiches
4.1 Généralités
4.2 Types de sorties
5 Calibres
5.1 Embases
5.2 Fiches
6 Caractéristiques
6.1 Généralités
6.2 Affectation de groupement des broches et des paires
6.3 Classification en catégories climatiques
6.4 Caractéristiques électrique
6.5 Caractéristiques de transmission
6.6 Caractéristiques mécaniques
7 Essais et programmes d'essai
7.1 Généralités
7.2 Disposition pour l'essai de la résistance de contact
7.3 Disposition pour l'essai de vibrations (phase d'essai
CP1)
7.4 Procédures d'essai et méthodes de mesure
7.5 Préconditionnement
7.6 Câblage et montage des spécimens
7.7 Programmes d'essais
Annexe A (normative) Procédure de continuité de calibrage
Annexe B (normative) Fonctionnement mécanique du dispositif
de verrouillage
Annexe C (normative) Exigences pour la fiche d'essai
Annexe D (normative) Exigences générales pour le montage de
mesure
Annexe E (normative) Perte d'insertion
Annexe F (normative) Affaiblissement de réflexion
Annexe G (normative) Paradiaphonie
Annexe H (normative) Télédiaphonie
Annexe I (normative) Perte de conversion transverse (TCL) et
perte de transfert de conversion
transverse (TCTL)
Annexe J (normative) Sortie de symétriseur
Annexe K (normative) Exigences de calibre
Annexe ZA (normative) Références normatives à d'autres
publications internationales avec les
publications européennes correspondantes
Covers 8-way unshielded free and fixed connectors and specifies mechanical and environmental requirements and electrical transmission requirements for frequencies up to 250 MHz.
| DevelopmentNote |
Indice de classement: C93-430-7-4. (06/2005) PR NF EN 60603-7-4 March 2010. (03/2010)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| IEC 60603-7-4:2010 | Identical |
| I.S. EN 60603-7-4:2010 | Identical |
| BS EN 60603-7-4:2010 | Identical |
| NBN EN 60603-7-4 : 2010 | Identical |
| DIN EN 60603-7-4 : 2011 | Identical |
| EN 60603-7-4:2010 | Identical |
| NF EN 60512-26-100 : 2009 AMD 1 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 26-100: MEASUREMENT SETUP, TEST AND REFERENCE ARRANGEMENTS AND MEASUREMENTS FOR CONNECTORS ACCORDING TO IEC 60603-7 - TESTS 26A TO 26G |
| NF EN 61076-3-116 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 3-116: RECTANGULAR CONNECTORS - DETAIL SPECIFICATION FOR PROTECTIVE HOUSINGS FOR USE WITH 8-WAY SHIELDED AND UNSHIELDED CONNECTORS FOR FREQUENCIES UP TO 600 MHZ FOR INDUSTRIAL ENVIRONMENTS INCORPORATING THE IEC 60603-7 SERIES INTERFACE - VARIANT 13 RELATED TO IEC 61076-3-106 - LOCKING LEVER |
| NF EN 60512-25-9 : 2009 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 25-9: SIGNAL INTEGRITY TESTS - TEST 25I: ALIEN CROSSTALK |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
| IEC 60352-6:1997 | Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60603-7-2:2010 | Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| IEC 60068-2-38:2009 | Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| IEC 61156-2:2010 | Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification |
| IEC 60603-7:2008+AMD1:2011 CSV | Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
| IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
| IEC 60512-1-100:2012 | Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications |
| IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| IEC 61156-5:2009+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification |
| IEC 61156-4:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification |
| IEC 61156-3:2008 | Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| EN 50289-1-14:2004 | Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| IEC 60352-7:2002 | Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.