NF EN 50521 : 2009 AMD 1 2012
Current
Current
The latest, up-to-date edition.
CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS
Published date
11-23-2012
Publisher
Sorry this product is not available in your region.
1 Domaine d'application
2 Références normatives
3 Définitions
4 Classification
4.1 Généralités
4.2 Type de connecteur
4.3 Caractéristiques supplémentaires
5 Exigences de construction et performances
5.1 Généralités
5.2 Marquage et identification
5.3 Dispositions contre un appariage incorrect
(non-appariable)
5.4 Protection contre les chocs électriques
5.5 Connexions de sortie et méthodes de connexion
5.6 Résistance au vieillissement
5.7 Conception générale
5.8 Conception d'une fiche pour câble
5.9 Degré de protection (Code IP)
5.10 Rigidité diélectrique
5.11 Solidité mécanique et électrique
5.12 Plage de température ambiante
5.13 Echauffement
5.14 Dispositif d'arrêt de traction et de torsion
de câble
5.15 Résistance mécanique
5.16 Connecteur sans dispositif de verrouillage
5.17 Connecteur avec dispositif de verrouillage
5.18 Distances d'isolement et lignes de fuite
5.19 Isolation
5.20 Parties isolantes
5.21 Pièces conductrices et résistance à la corrosion
6 Essais
6.1 Généralités
6.2 Préparation des éprouvettes
6.3 Réalisation des essais
6.4 Programme d'essai (individuel de série) des fiches
pour câbles non-démontables
6.5 Programme d'essai
Annexe A (normative) Symbole
Bibliographie
La présente norme s'applique à des connecteurs de la classe d'application A conformes à la EN 61730-1, utilisés dans les systèmes photovoltaïques de tension assignée allant jusqu'à 1000 V c.c. et de courant assigné allant jusqu'à 125 A par contact. La présente norme s'applique à des connecteurs sans pouvoir de coupure mais qui peuvent être branchés et débranchés sous tension.
| DevelopmentNote |
Indice de classement: C57-339. PR NF EN 50521 July 2008. (07/2008)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| EN 50521:2008/A1:2012 | Identical |
| XP C15 712-3 : 2016 XP | PHOTOVOLTAIC INSTALLATIONS WITH ENERGY STORAGE AND CONNECTED TO A PUBLIC DISTRIBUTION NETWORK |
| UTEC 15 712-2 : 2013 | INSTALLATIONS ELECTRIQUES A BASSE TENSION - GUIDE PRATIQUE - INSTALLATIONS PHOTOVOLTAIQUES AUTONOMES NON RACCORDEES AU RESEAU PUBLIC DE DISTRIBUTION AVEC STOCKAGE PAR BATTERIE |
| UTEC 15 712-1 : 2013 | INSTALLATIONS ELECTRIQUES A BASSE TENSION - GUIDE PRATIQUE - INSTALLATIONS PHOTOVOLTAIQUES SANS STOCKAGE ET RACCORDEES AU RESEAU PUBLIC DE DISTRIBUTION |
| UTEC 18 510-2 : 2013 | PRESCRIPTIONS DE SECURITE D'ORDRE ELECTRIQUE RELATIVES AUX OPERATIONS EFFECTUEES SUR LES INSTALLATIONS DE PRODUCTION D'ELECTRICITE OU DANS LEUR ENVIRONNEMENT |
| NF EN 60352-6 : 1998 | SOLDERLESS CONNECTIONS - PART 6: INSULATION PIERCING CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
| NF EN 60068 2-75 : 2015 | ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS |
| NF EN 60352-4 : 2001 | SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60068-2-70:1995 | Environmental testing - Part 2-70: Tests - Test Xb: Abrasion of markings and letterings caused by rubbing of fingers and hands |
| IEC 60364-7-712:2017 | Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
| IEC 60228:2004 | Conductors of insulated cables |
| IEC 61984:2008 | Connectors - Safety requirements and tests |
| IEC 60352-6:1997 | Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| NF EN 60352-5 : 2012 | SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60998-2-3:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-3: Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| IEC 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| NF EN 60664-1 : 2007 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS |
| NF EN ISO 6988 : 1995 | METALLIC AND OTHER NON-ORGANIC COATINGS - SULFUR DIOXIDE TEST WITH GENERAL CONDENSATION OF MOISTURE |
| IEC 60999-2:2003 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included) |
| NFC 41 101 : 1995 | HIGH VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS |
| IEC 61210:2010 | Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements |
| NFC 01 826 : 2004 | ELECTROTECHNICAL VOCABULARY - CHAPTER 826 - ELECTRICAL INSTALLATIONS OF BUILDINGS |
| NF EN ISO 4892-2 : 2013 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 2: XENON-ARC LAMPS |
| NF EN 60695-11-10 : 2013 | FIRE HAZARD TESTING - PART 11-10: TEST FLAMES - 50 W HORIZONTAL AND VERTICAL FLAME TEST METHODS |
| NF EN 61140 : 2016 | PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT |
| NF EN 60999-2 : 2003 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS - PART 2: PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS ABOVE 35 MM[2] UP TO 300 MM[2] (INCLUDED) |
| NF EN 60352-3 : 2002 | SOLDERLESS CONNECTIONS - PART 3: SOLDERLESS ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| NF EN 60529 : 92 AMD 2 2014 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) |
| NF EN 60228 : 2005 | CONDUCTORS OF INSULATED CABLES |
| NF EN 60352-7 : 2003 | SOLDERLESS CONNECTIONS - PART 7: SPRING CLAMP CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| NF EN 61215 : 2005 | CRYSTALLINE SILICON TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| NF EN 60309-1 : 1999 AMD 2 2013 | PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
| NFC 01 581 : 82 AMD 1 1999 | ELECTROTECHNICAL VOCABULARY - CHAPTER 581 - ELECTROMECHANICAL COMPONENTS FOR ELECTRONIC EQUIPMENT |
| NF EN 60512-1 : 2001 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TEST AND MEASUREMENTS - PART 1: GENERAL |
| NF EN 61730-1 : 2007 AMD 11 2015 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| NF EN 60999-1 : 2000 | CONNECTING DEVICES - ELECTRICAL COPPER CONDUCTORS - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREW LESS-TYPE CLAMPING UNITS - PART 1: GENERAL REQUIREMENTS AND PARTICULAR REQUIREMENTS FOR CLAMPING UNITS FOR CONDUCTORS FROM 0,2 MM[2] TO 35 MM[2] (INCLUDED) |
| IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
| NF EN 60068-1 : 2014 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
| NF EN 60068 2-14 : 2009 | ENVIRONMENTAL TESTING - PART 2-14: TESTS - TEST N: CHANGE OF TEMPERATURE |
| IEC TR 60943:1998+AMD1:2008 CSV | Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals |
| IEC 61730-1:2016 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| IEC 60512-11-7:2003 | Connectors for electronic equipment - Tests and measurements - Part 11-7: Climatic tests - Test 11g: Flowing mixed gas corrosion test |
| HD 60364-7-712:2016 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| NF EN 60068-2-78 : 2013 | ENVIRONMENTAL TESTING - PART 2-78: TESTS - TEST CAB: DAMP HEAT, STEADY STATE |
| NF EN 61984 : 2009 | CONNECTORS - SAFETY REQUIREMENTS AND TESTS |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| NF EN 60352-2 : 2006 AMD 1 2014 | SOLDERLESS CONNECTIONS - PART 2: CRIMPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60309-1:1999+AMD1:2005+AMD2:2012 CSV | Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
| NF EN 50262 : 1999 AMD 2 2005 | METRIC CABLE GLANDS FOR ELECTRICAL INSTALLATIONS |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| ISO 6988:1985 | Metallic and other non organic coatings Sulfur dioxide test with general condensation of moisture |
| IEC 60050-581:2008 | International Electrotechnical Vocabulary (IEV) - Part 581: Electromechanical components for electronic equipment |
| NF EN 60998-2-3 : 2004 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-3: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH INSULATION-PIERCING CLAMPING UNITS |
| IEC 60352-7:2002 | Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance |
| NF EN 60512 11-7 : 2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 11-7: CLIMATIC TESTS - TEST 11G: FLOWING MIXED GAS CORROSION TEST |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.