NF EN 1555-5 : 2010
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM
03-15-2023
01-12-2013
Avant-propos
Introduction
1 Domaine d'application
2 Références normatives
3 Termes et définitions
4 Aptitude à l'emploi
4.1 Méthode de préparation des assemblages pour les essais
4.2 Exigences pour l'aptitude à l'emploi
5 Coefficient global de service (de conception)
Annexe A (informative) - Coefficients de réduction en fonction
des températures de service
Annexe B (informative) - Résistance à la propagation rapide de
fissure (RCP) à une température inférieure à 0 degré C
Bibliographie
Describes requirements of fitness for purpose of the polyethylene (PE) piping system in the field of the supply of gaseous fuels. It also provides the definitions of electrofusion, butt fusion and mechanical joints.
| DevelopmentNote |
Indice de classement: T54-065-5. Supersedes NFT 54 065. (05/2004) Together with NF EN 1555-1, NF EN 1555-4, NFT 54 972, NFT 54 973 and NFT 54 969, Supersedes NFT 54 067. Together with NF EN 1555-1, NF EN 1555-3 and NFT 54 969, Supersedes NFT 54 068 and NFT 54 069. Together with NF EN 1555-1, NF EN 1555-3, NFT 54 970 and NFT 54 969, Supersedes NFT 54 079. Together with NF EN 1555-1, NF EN 1555-3, NFT 54 975 and NFT 54 969, Supersedes NFT 54 066. (02/2005) PR NF EN 1555-5 March 2009. (03/2009)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 1555-5 : 2011 | Identical |
| UNI EN 1555-5 : 2011 | Identical |
| UNE-EN 1555-5:2011 | Identical |
| I.S. EN 1555-5:2010 | Identical |
| NBN EN 1555-5 : 2010 | Identical |
| EN 1555-5:2010 | Identical |
| SN EN 1555-5 : 2010 | Identical |
| BS EN 1555-5:2010 | Identical |
| NS EN 1555-5 : 1ED 2010 | Identical |
| NEN EN 1555-5 : 2010 | Identical |
| DIN EN 1555-5:2010-12 | Identical |
| NFT 54 965 : 2003 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - POLYETHYLENE (PE) - SPECIFICATIONS FOR THE PACKAGING, THE STORAGE, THE HANDLING AND THE TRANSPORTATION OF THE PIPES |
| EN 1555-1:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 1: General |
| EN 1555-3:2010+A1:2012 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings |
| ISO 13953:2001 | Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint |
| ISO 10838-3:2001 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 3: Thermoplastics fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| ISO 13956:2010 | Plastics pipes and fittings Decohesion test of polyethylene (PE) saddle fusion joints Evaluation of ductility of fusion joint interface by tear test |
| EN ISO 1167-2:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) |
| ISO 10838-2:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 2: Metal fittings for pipes of nominal outside diameter greater than 63 mm |
| EN ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) |
| ISO 10838-1:2000 | Mechanical fittings for polyethylene piping systems for the supply of gaseous fuels Part 1: Metal fittings for pipes of nominal outside diameter less than or equal to 63 mm |
| EN ISO 13477:2008 | Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008) |
| EN ISO 13478:2007 | Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007) |
| ISO 11414:2009 | Plastics pipes and fittings Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion |
| EN ISO 1167-4:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007) |
| ISO 13954:1997 | Plastics pipes and fittings Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm |
| EN 1555-4:2011 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 4: Valves |
| ISO 13955:1997 | Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies |
| EN 1555-2:2010 | Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 2: Pipes |
| ISO 11413:2008 | Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.