NF EN 10045-1 : 1990
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD
01-01-2011
01-12-2013
National foreword
Brief history
1. Object and field of application
2. References
3. Principle
4. Designations
5. Test pieces
6. Testing machine
7. Test requirements
8. Test report
Annex
A. List of national standards corresponding to the
reference European Standard in preparation
National appendix A
National appendix B
Cooperating organizations
Explains the Charpy impact test for metallic materials. For certain particular metallic materials and applications, the Charpy impact test may be the subject of specific standards and particular requirements. Covers references, principle, designations, test pieces, testing machine, test requirements and test report.
| DevelopmentNote |
INDICE DE CLASSEMENT: A03011 Supersedes AIR 0814 (06/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 10045-1:1991 | Identical |
| DIN EN 10045-1:1991-04 | Identical |
| EN 10045-1 : 1990 | Identical |
| BS EN 10045-1:1990 | Identical |
| NF EN 10217-6 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 6: SUBMERGED ARC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| NF EN ISO 3471 : 2008 | EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| NF EN 1993 1-10 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES |
| NF EN 14399-7 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
| XP A35 014 : 2003 XP | REINFORCING STEELS - PLAIN, INDENTED OR RIBBED STAINLESS STEEL BARS AND COILS |
| NF EN 10217-5 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NF EN 12693 : 2008 | REFRIGERATING SYSTEMS AND HEAT PUMPS - SAFETY AND ENVIRONMENTAL REQUIREMENTS - POSITIVE DISPLACEMENT REFRIGERANT COMPRESSORS |
| NF EN 334 : 2005 + A1 2009 | GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR |
| NF EN 14382 : 2005 + A1 2009 | SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR |
| NF EN 10250-1 : 1999 | OPEN DIE STEEL FORGINGS FOR GENERAL ENGINEERING PURPOSES - PART 1: GENERAL REQUIREMENTS |
| NF EN 14399-10 : 2009 | HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
| NFA 33 200 : 95 XP | IRON AND STEEL - MARAGING STEEL FOR FORGING INTENDED FOR THE MANUFACTURE OF FENCING BLADES |
| NF EN 10217-1 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| NF EN 10088-4 : 2009 | STAINLESS STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
| NF EN 13155 : 2003 + A2 2009 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| NF EN 13411-7 : 2006 + A1 2008 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 7: SYMMETRIC WEDGE SOCKET |
| NF ISO 2330 : 2008 | FORK-LIFT TRUCKS - FORK ARMS - TECHNICAL CHARACTERISTICS AND TESTING |
| NF CEN/TS 13001-3-1 : 2005 XP | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| NF EN 14399-8 : 2008 | HIGH-STRENGTH STRUCTURAL BOLTING FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
| NF EN 10217-4 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 4: ELECTRIC WELDED NON-ALLOY STEEL TUBES WITH SPECIFIED LOW TEMPERATURE PROPERTIES |
| NF ISO 8083 : 2006 | MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS) - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS |
| NF EN 10217-2 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
| NFS 94 090 : 2005 | MEDICO-SURGICAL EQUIPMENT - MATERIALS FOR ANCILLARY POSITIONING INSTRUMENTS FOR BONE SURGERY - MARTENSITIC, PRECIPITATION HARDENING, AUSTENITIC AND AUSTENO-FERRITIC STAINLESS STEELS |
| NFE 29 204 : 2008 | INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS |
| NFA 32 058 : 2008 | FOUNDRY PRODUCTS - ABRASION RESISTANT CAST STEELS |
| XP A49 342 : 97 XP | STEEL TUBES - WELDED STEEL TUBES WITH IMPROVED MACHINABILITY FOR MECHANICAL MACHINED PARTS - DIMENSIONS - TECHNICAL DELIVERY REQUIREMENTS |
| NF EN 10217-3 : 2002 AMD 1 2005 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 3: ALLOY FINE GRAIN STEEL TUBES |
| NFA 35 555 : 95 FD | IRON AND STEEL - STRUCTURAL STEEL BARS DELIVERED IN THE QUENCHED AND TEMPERED CONDITION |
| NF EN 10088-5 : 2009 | STAINLESS STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR CONSTRUCTION PURPOSES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.