NF EN 10025 : 1993
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
PRODUITS LAMINES A CHAUD EN ACIERS DE CONSTRUCTION NON ALLIES - CONDITIONS TECHNIQUES DE LIVRAISON
03-01-2005
01-12-2013
Cooperating organizations
National foreword
Foreword
1 Scope
2 Normative references
2.1 General standards
2.2 Standards on dimensions and tolerances
2.3 Standards on testing
3 Definitions
4 Information to be supplied by the purchaser
4.1 General
4.2 Options
5 Dimensions, mass and tolerances
5.1 Dimensions and tolerances
5.2 Mass of steel
6 Classification of grades and qualities;
designation
6.1 Classification of grades and qualities
6.2 Designation
7 Technical requirements
7.1 Steel manufacturing process
7.2 Delivery conditions
7.3 Chemical composition
7.4 Mechanical properties
7.5 Technological properties
7.6 Surface finish
8 Inspection and testing
8.1 General
8.2 Specific inspection and testing
8.3 Sampling
8.4 Test units
8.5 Verification of chemical composition
8.6 Mechanical tests
8.7 Test methods
8.8 Retests and resubmission for testing
8.9 Internal defects
8.10 Inspection documents
9 Marking of flat and long products
10 Complaints after delivery
11 Options
11.1 All products
11.2 Flat products
11.3 Long products
11.4 Semi-finished products
Annex A (normative) Location of samples and test pieces
(see EURONORM 18)
Annex B (informative) List of national standards which
correspond with EURONORMS referenced
Annex C (informative) List of corresponding former
national designations
National annex NA (normative) Non-conflicting national
additions
National annex NB (informative) Applicable standards
National annex NC (informative) Committees responsible
National annex ND (informative) Cross-references
Lays down requirements for long products and flat products of hot rolled non-alloy, base and quality steels. Intended for use in welded, bolted and riveted structures, for service at ambient temperatures. Not intended to be heat treated except products delivered in the delivery condition N. Stress relief annealing if permitted. Products delivered in N condition may be normalized and hot formed after delivery. Does not apply to coated products. Covers definitions, information to be supplied by the purchaser, dimensions, mass and tolerances, classification of qualities, designation, technical requirements, inspection and testing, marking for flat and long products, complaints after delivery and options.
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 10025:1994 | Identical |
| BS EN 10025:1993 | Identical |
| EN 10025:1990/A1:1993 | Identical |
| UNI EN 10025 : 1995 | Identical |
| DIN EN 10025:1994-03 | Identical |
| I.S. EN 10025:1994 | Identical |
| XP P98 541 : 2005 XP | TEMPORARY ROAD TRAFFIC SIGNS - TRAFFIC SIGNS AND SUPPORTS - MAIN DIMENSIONS AND TOLERANCES |
| XP ENV 13381-4 : 2002 XP | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 4: APPLIED PROTECTION TO STEEL MEMBERS |
| NF ENV 1993-5 : 2002 FD | EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 5: PILING |
| NF EN 12285-1 : 2003 | WORKSHOP FABRICATED TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| XP P98 531 : 99 XP | PERMANENT ROAD TRAFFIC SIGNS - PRINCIPAL DIMENSIONS OF TRAFFIC SIGNS AND SUPPORTS - VALUES AND DIMENSIONAL TOLERANCES |
| NF EN 1993 1-10 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-10: MATERIAL TOUGHNESS AND THROUGH-THICKNESS PROPERTIES |
| NFP 34 205 : 1997 | BUILDING WORKS - ROOFING WITH PROFILED SHEETING MADE OF COATED STEEL SHEET - PART 1: TECHNICAL CLAUSES - PART 2: SPECIAL CLAUSES |
| NFA 36 715 : 2003 | UNPACKAGED STEELS - LONG STEEL PRODUCTS INTENDED FOR CONTACT WITH FOODSTUFFS, PRODUCTS AND BEVERAGES FOR HUMAN AND ANIMAL CONSUMPTION - UNCOATED, NON STAINLESS, UNALLOYED AND ALLOYED STEELS |
| NF ENV 1998 1-3 : 2003 XP | EUROCODE 8 - DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-3: GENERAL RULES - SPECIFIC RULES FOR VARIOUS MATERIALS AND ELEMENTS |
| NFP 93 354 : 2011 | BUILDING SITE EQUIPMENT - BRACKET SCAFFOLDING - PRODUCT SPECIFICATION - TEST METHOD |
| NFP 93 523 : 2002 | BUILDING SITE EQUIPMENT - TEMPORARY METALLIC STAIRWAYS INTENDED FOR PUBLIC USE |
| NF EN 50216-10 : 2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 10: OIL-TO-AIR HEAT EXCHANGERS |
| NFP 22 501-1 : 98 XP | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| NFP 22 311 : 92 AMD 2 2002 XP | STEEL CONSTRUCTION - EUROCODE 3: "DESIGN OF STEEL STRUCTURES" AND NATIONAL APPLICATION DOCUMENT - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| NFE 52 140 : 2006 | FORGED SHACKLES FOR GENERAL LIFTING PURPOSES - DEE SHACKLES AND BOW SHACKLES - GRADES 4 AND 8 |
| XP P98 421 : 2006 XP | ROAD SAFETY BARRIERS - BN4 SAFETY BARRIERS - COMPOSITION, OPERATION, HOLDING PERFORMANCES, INSTALLATION AND MOUNTING CONDITIONS, COMPONENTS |
| XP ENV 13381-2 : 2002 XP | TEST METHODS FOR DETERMINING THE CONTRIBUTION TO THE FIRE RESISTANCE OF STRUCTURAL MEMBERS - PART 2: VERTICAL PROTECTIVE MEMBRANES |
| NF EN 13155 : 2003 + A2 2009 | CRANES - SAFETY - NON-FIXED LOAD LIFTING ATTACHMENTS |
| NF ENV 1993-2 : 2000 XP | EUROCODE 3: DESIGN OF STEEL STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 2: STEEL BRIDGES |
| NFP 98 550 : 96 XP | VERTICAL ROAD TRAFFIC SIGNS - GANTRIES, CANTILEVERS AND HIGH MASTS - CALCULATION SPECIFICATIONS, INSTALLATION AND CONTROL |
| NF EN 1993-3-2 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 3-2: TOWERS, MASTS AND CHIMNEYS - CHIMNEYS |
| NFP 22 101-2/CN : 2009 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES - NATIONAL ADDITION TO NF EN 1090-2:2009 |
| XP P98 540 : 2005 XP | TEMPORARY ROAD TRAFFIC SIGNS - TRAFFIC SIGNS AND SUPPORTS - PERFORMANCE, TECHNICAL CHARACTERISTICS AND SPECIFICATIONS |
| NF CEN/TS 13001-3-1 : 2005 XP | CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES |
| XP P98 424 : 98 XP | ROAD SAFETY BARRIERS - BN5 SAFETY BARRIERS - COMPOSITION, OPERATION, HOLDING PERFORMANCES, INSTALLATION AND MOUNTING CONDITIONS, COMPONENTS |
| FD CR 10313 : 2000 FD | CLASSIFICATION OF GRADES OF STEEL - EXAMPLES OF CLASSIFICATION RELATED TO EUROPEAN STANDARDS |
| XP P98 530 : 99 XP | PERMANENT ROAD TRAFFIC SIGNS - TRAFFIC SIGNS AND SUPPORTS - TECHNICAL CHARACTERISTICS AND SPECIFICATIONS |
| NF EN 1993 1-2 : 2005 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-2: GENERAL RULES - STRUCTURAL FIRE DESIGN |
| NF EN 50216-9 : 2009 | POWER TRANSFORMER AND REACTOR FITTINGS - PART 9: OIL-TO-WATER HEAT EXCHANGERS |
| NF ENV 1998 1-1 : 2000 XP | EUROCODE 8: DESIGN PROVISIONS FOR EARTHQUAKE RESISTANCE OF STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-1: GENERAL RULES - SEISMIC ACTIONS AND REQUIREMENTS FOR STRUCTURES |
| NF ENV 1993 1-3 : 99 XP | STEEL CONSTRUCTION - EUROCODE 3: DESIGN OF STEEL STRUCTURES AND NATIONAL APPLICATION DOCUMENT - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD FORMED THIN GAUGE MEMBERS AND SHEETING |
| XP P98 422 : 2000 XP | ROAD SAFETY BARRIERS - REINFORCED CONCRETE AND METAL BN1 AND BN2 SAFETY BARRIERS - COMPOSITION, OPERATION, HOLDING PERFORMANCES, INSTALLATION AND MOUNTING CONDITIONS, COMPONENTS |
| NF EN 1993-4-1 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-1: SILOS |
| NF EN 13814 : 2007 | FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.