NEN EN 10288 : 2002

Foreword
1 Scope
2 Normative references
3 Terms, definitions and symbols
   3.1 Terms and definitions
   3.2 Symbols
4 Classification of coatings
5 Information to be supplied by the purchaser
   5.1 Mandatory
   5.2 Options to be indicated by the purchaser
6 Documents
7 Application of the coating
   7.1 Surface preparation
   7.2 Composition of the coating
8 Requirements of the applied coating
   8.1 General
   8.2 Appearance and continuity
   8.3 Thickness of the coating system
   8.4 Cut back at the ends
   8.5 Holiday detection
   8.6 Impact resistance
   8.7 Peel force
   8.8 Indentation resistance
   8.9 Electrical insulation resistance
   8.10 Elongation at break
   8.11 Resistance to ultraviolet irradiation
   8.12 Thermal stability
   8.13 Cathodic disbondment
   8.14 Flexibility
9 Inspection
   9.1 Document
   9.2 Sampling
   9.3 Nature and frequency of testing and control
   9.4 Retests
10 Repairs
11 Marking
12 Handling, transportation and storage
   12.1 Handling
   12.2 Transportation to the storage area
   12.3 Storage
   12.4 Loading of tubes and components for delivery
Annex A (normative) Inspection of thickness
      A.1 General
      A.2 Apparatus
      A.3 Procedure
      A.4 Results
Annex B (normative) Holiday detection test
      B.1 General
      B.2 Apparatus
      B.3 Procedure
      B.4 Results
Annex C (normative) Impact test
      C.1 General
      C.2 Apparatus
      C.3 Procedure
      C.4 Results
Annex D (normative) Peel force test
      D.1 Measurement of the peeling force on a coated
          sample (type 1)
      D.2 Measurement of the peel strength on large diameter
          tube (type 2)
Annex E (normative) Indentation test
      E.1 General
      E.2 Apparatus
      E.3 Procedure
      E.4 Results
Annex F (normative) Specific electrical insulation
        resistance test
      F.1 General
      F.2 Apparatus
      F.3 Procedure
      F.4 Results
Annex G (normative) Elongation at break test
      G.1 General
      G.2 Apparatus
      G.3 Sampling
      G.4 Procedure
      G.5 Results
Annex H (normative) Ultraviolet irradiation and thermal
        stability tests
      H.1 Resistance to ultraviolet radiation
      H.2 Thermal stability
Annex J (normative) Cathodic disbondment test
      J.1 General
      J.2 Apparatus
      J.3 Sampling
      J.4 Procedure
      J.5 Results
Annex K (normative) Types of inspection documents
Annex L (informative) A-Deviation
Bibliography

Specifies the application of factory applied external two layer extruded polyethylene based coatings for the corrosion protection of tubes and pipeline components.