NEMA ICS 1 : 2000(R2015)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
12-06-2012
Superseded date
09-13-2022
Superseded by
Free
Excluding Tax where applicable
Foreword
Introduction
1 General
2 Definitions
3 Classification
4 Characteristics and ratings
5 Product marking, installation and maintenance information
6 Service and storage conditions
7 Construction
8 Performance requirements and tests
Annex A - SPACINGS VERIFIED BY TESTING
Annex B - TYPICAL IMPULSE TEST CIRCUIT
Annex C - EXAMPLES OF CLEARANCE AND CREEPAGE MEASUREMENT
Annex D - FLOWCHARTS FOR DETERMINING CLEARANCE AND CREEPAGE
Annex E - ELECTRICAL NOISE TESTS
Describes all standards of a general nature in order to obtain uniform application of requirements throughout the range of industrial control and systems equipment.
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
National Electrical Manufacturers Association
|
| Status |
Superseded
|
| SupersededBy |
| MIL-B-44037 Revision A:1986 | Blender, Powered Mix, Mechanically Refrigerated (No S/S Document) |
| MIL-B-17452 Revision E:1990 | Boilers, Steam and Hot Water, Firetube, Scotch Package Type (320,001 TO 35,000,000 BTU/HR Thermal Output Capacity) (S/S by F-B-2903) |
| MIL-F-80258 Revision A:1986 | Furnace, Heat Treating, Electric, Natural Atmosphere, Box Type (S/S by A-A-59375) |
| MIL-B-18897 Revision F:1990 | Boilers, Steam and Hot Water, Watertube (Straight Bare and Finned Tube) Cast Iron and Firebox, Packaged Type (40,000 to 35,000,000 BTU/HR Thermal Output Capacity) (No S/S Document) |
| MIL-W-80187 Revision A:1985 | WELDING MACHINES, ULTRASONIC BONDING, MINIATURE WIRE (NO S/S DOCUMENT) |
| MIL-W-45844 Revision D:1987 | WELDING MACHINE, RESISTANCE, SPOT-TYPE PORTABLE, (AUTOMOTIVE REPAIR) (NO S/S DOCUMENT) |
| MIL-B-23170 Revision A:1978 | Boiler, Steam, High Pressure Water Tube, Packaged Type,(5,000 to 50,000 Pounds Per Hour Fired by Coal, Gas or Combination Oil/Gas) (S/S by MIL-B-17095) |
| MIL-PRF-32236 Base Document:2007 | Generator, Chlorine - Portable Electrolytic (PECG) |
| MIL-M-24738 Base Document:1990 | Monitors, High Temperature Motor Protection |
| UFC 3-520-01 : 2015 | UNIFIED FACILITIES CRITERIA - INTERIOR ELECTRICAL SYSTEMS |
| IEEE 241 : 1990 | ELECTRIC POWER SYSTEMS IN COMMERCIAL BUILDINGS |
| F-B-2903 Base Document:1998 | Boilers, Steam and Hot Water, Firetube, Scotch Packaged Type (320,001 to 35,000,000 BTU/HR Thermal Output Capacity) (No S/S Document) |
| MIL-B-13207 Revision D:1976 | Body, Van, Vehicle-Mounted, General Specification for |
| OO-M-340 Revision F:2004 | Milling, Grinding, Drilling, and Slotting Attachment (No S/S Document) |
| MIL-F-80233 Revision B:1985 | Furnace, Vacuum, Heat Treating, Integral Quench (No S/S Document) |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| GGG-S-58 Revision F:1993 | Saw, Radial Overarm, Woodworking (No S/S Document) |
| MIL-B-18796 Revision F:1984 | Burners, Single: Oil, Gas, and Gas-Oil Combination for Packaged Boilers(320,001 to 125,000,000 BTU/HR Thermal Output Capacity) (S/S BY F-B-2910) |
| MIL-P-80249 Revision A:1982 | PLATING UNIT, SELECTIVE (BRUSH), PORTABLE (S/S BY A-A-59460) |
| MIL-G-19826 Revision F:1984 | Generator Set, Diesel Engine, Alternating Current , for Facilities Construction; 10 KW Through 1000 KW (Not Stocked) (S/S By CC-G-2745) |
| MIL-D-80002 Revision E:1989 | Drilling Machine, Upright Floor Type, Round and Box Column, Sliding Head, Plain Table, Power Feed (S/S by A-A-59455) |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| A-A-59618 Base Document:2002 | Cleaner, Pressure, Hot-Water, Skid-Mounted |
| MIL-F-80133 Revision B:1987 | Furnace, Heat Treating, Pit Type, Electric, Forced Convection (No S/S Document) |
| F-P-2908 Base Document:1997 | PUMPING UNITS, CONDENSATE, RETURN; AND BOILER FEED PACKAGE (NO S/S DOCUMENT) |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| MIL-M-80255 Revision B:1990 | MACHINING CENTERS, VERTICAL, SINGLE SPINDLE, COMPUTER NUMERICAL CONTROL (CNC) (S/S BY A-A-59232) |
| MIL-PRF-80095 Revision E:2015 | Saws, Band, Woodworking |
| MIL-P-80186 Revision B:1991 | POSITIONERS, WELDING, ROTATING TABLE, CANTILEVER ARM DESIGN (NO S/S DOCUMENT) |
| A-A-59393 Base Document:2000 | Milling Machine, Vertical Multispindle, Double Column, Computer Numerical Control (CNC) (No S/S Document) |
| MIL-DTL-15109 Revision D:2001 | Resistors and Rheostats, Naval Shipboard |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| MIL-B-29205 Revision A:1990 | Boilers, Fluidized Bed, Steam and Hot Water, Packaged Type (330 to 51,500 Pounds Per Hour Thermal Output Capacity) (No S/S Document) |
| OO-J-571 Revision F:2015 | Jointers, Woodworking |
| MIL-B-28685 Base Document:1990 | Baghouse, Reverse Pulse Jet; for Packaged Boilers Fired on Coal or a Combination of Coal and Gas, Coal and Oil, or Coal-Gas-Oil (2,000,000 to 125,000,000 BTU/HR Thermal Output Capacity) (S/S by OO-B-2929) |
| IEEE C37.59-2007 | IEEE Standard Requirements for Conversion of Power Switchgear Equipment |
| MIL-DTL-2212 Revision K:2014 | Contactors and Controllers, Electric Motor AC or DC, and Associated Switching Devices |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| MIL-F-80113 Revision D:1988 | Furnace, Vacuum, Heat Treating and Brazing (No S/S Document) |
| F-S-2911 Base Document:1997 | Stokers, Mechanical: For Packaged Boilers Fired on Coal or a Combination of Coal-Gas, Coal-Oil, or Coal-Gas-Oil (2,000,000 to 50,000,000 BTU/HR Thermal Output Capacity) (No S/S Document) |
| MIL-S-3788 Revision G:1991 | Shaper, Woodworking (No S/S Document) |
| MIL-P-17552 Revision F:1991 | PUMP UNITS, CENTRIFUGAL, WATER, HORIZONTAL; GENERAL SERVICE AND BOILER-FEED: ELECTRIC-MOTOR - OR STEAM-TURBINE-DRIVEN (S/S BY A-A-50562) |
| MIL-A-43657 Base Document:1969 | Absorber, Vapor, Synthetic Solvent Dry Cleaning Units (No S/S Document) |
| F-B-2902 Base Document:1990 | BOILERS, STEAM WATERTUBE (BENT TUBE, MULTI-DRUM AND CROSS DRUM) PACKAGED TYPE (10,000,000 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) (NO S/S DOCUMENT) |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| OO-P-2895 Base Document:1997 | PLANT, AGGREGATE, SECONDARY, WITH CONE CRUSHER, MOBILE, 75 TON PER HOUR CAPACITY (NO S/S DOCUMENT) |
| MIL-B-18966 Revision C:1984 | BLOCKING PLANT, CONCRETE |
| MIL-C-23742 Base Document:1963 | Control Centers, Alternating Current Naval Shipboard |
| MIL M 29212 : B NOTICE 1 | MIXING PLANT, ASPHALT, DRUM TYPE, PORTABLE, ELECTRIC MOTOR DRIVEN, 120 TONS PER HOUR CAPACITY |
| MIL-B-17095 Revision H:1990 | Boilers, Steam, Watertube (Bent Tube, Multi-Drum and Cross Drum) Packaged Type (10,000,000 to 125,000,000 BTU/HR Thermal Output Capacity) (S/S by F-B-2902) |
| A-A-59266 Base Document:1998 | Grinding Machine, Universal, Cylindrical, External, Center-Type |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| MIL-B-45022 Revision F:1992 | Blast Cleaning Cabinets (No S/S Document) |
| MIL-PRF-43001 Revision G:2016 | Washer-Extractors, Laundry, Commercial |
| F-B-2910 Base Document:1998 | BURNERS, SINGLE: OIL, GAS, AND GAS-OIL COMBINATION FOR PACKAGED BOILERS (320,001 TO 125,000,000 BTU/HR THERMAL OUTPUT CAPACITY) (NO S/S DOCUMENT) |
| MIL-L-44142 Revision A:1986 | Laundry Unit, Trailer Mounted |
| WW-F-2743 Revision A:1998 | Furnaces, Warm Air and Heaters, Unit, Forced Air Circulation, Oil - and Gas Fired |
| CC-G-2745 Base Document:1984 | GENERATOR SETS, DIESEL ENGINE, ALTERNATING CURRENT, FOR FACILITIES CONSTRUCTION; 10 KW THROUGH 1000 KW (NOT STOCKED) (NO S/S DOCUMENT) |
| MIL-C-11085 Revision D:1986 | Conveyor, Belt; (Flat, Skid-Mounted, Electric-Motor-Driven, 24-Inch-Wide Belt, 50-Foot-Long Frame; Capacity, 25 Pounds Per Foot, 75 Tons Per Hour) (No S/S Document) |
| MIL-F-80188 Revision B:1985 | Furnace, Heat Treating, Electric, Metal Lined, Box Design (No S/S Document) |
| MIL-F-80089 Revision B:1986 | Furnace, Heat Treating, Gas Fired, Box Type, Direct Fired and Full Muffle Design (No S/S Document) |
| OO-S-236 Revision E:2015 | Saw, Circular, Table Type, Woodworking, Single Tilting Arbor, Floor Mounted |
| MIL-B-45081 Revision E:1991 | Blast Cleaning Machine: Self-Contained Tumble Type, with Dust Collector (No S/S Document) |
| NEMA ICS 5, Annex E-2002 (R2008) | INDUSTRIAL CONTROL AND SYSTEMS: ADDITIONAL REQUIREMENTS FOR PROXIMITY SWITCHES SUITABLE FOR USE IN STRONG MAGNETIC FIELDS |
| NEMA ICS 7 : 2014 | INDUSTRIAL CONTROL AND SYSTEMS: ADJUSTABLE - SPEED DRIVES |
| NEMA ICS 4:2015 | Application Guideline for Terminal Blocks |
| NEMA ICS 20:2009 (R2015) | Informational Guide to Electrical Industrial Topics |
| NEMA ICS 61800-2:2005 | Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements—Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems |
| NEMA ICS 5, Annex F-2002 (R2012) | INDUSTRIAL CONTROL AND SYSTEMS: HIGH-PRESSURE POWER WASH TEST PROCEDURE FOR SELF-CONTAINED CONTROL-CIRCUIT DEVICES |
| NEMA KS 1:2013 | Heavy Duty Enclosed and Dead-Front Switches (600 Volts Maximum) |
| NEMA ICS8 : 2011 | APPLICATION GUIDE FOR INDUSTRIAL CONTROL AND SYSTEMS CRANE AND HOIST CONTROLLERS |
| NEMA ICS 18:2001 (R2007) | INDUSTRIAL CONTROL AND SYSTEMS: MOTOR CONTROL CENTERS |
| IEEE 1623-2004 | IEEE Guide for the Functional Specification of Medium Voltage (1 kV - 35 kV) Electronic Shunt Devices for Dynamic Voltage Compensation |
| IEEE 421.3-1997 | IEEE Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines |
| NEMA ICS 2.4 : 2003(R2012) | INDUSTRIAL CONTROL AND SYSTEMS: NEMA AND IEC DEVICES FOR MOTOR SERVICE - A GUIDE FOR UNDERSTANDING THE DIFFERENCES |
| NEMA ICS 3:2005 (R2010) | INDUSTRIAL CONTROL AND SYSTEMS: MEDIUM VOLTAGE CONTROLLERS RATED 2001 TO 7200 VOLTS AC |
| ANSI C93.4 : 2012 | REQUIREMENTS FOR LINE TUNING UNITS |
| ASTM F 1433 : 1997 : R2004 | Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner |
| NEMA ICS 7.2 : 2015 | APPLICATION GUIDE FOR AC ADJUSTABLE SPEED DRIVE SYSTEMS |
| NEMA ICS 3.1 : 2009(R2014) | GUIDE FOR THE APPLICATION, HANDLING, STORAGE, INSTALLATION, AND MAINTENANCE OF MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTERS |
| ASTM F 1433 : 1997 : R2010 | Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner (Withdrawn 2019) |
| IEEE C37.13.1-2006 | IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| IEEE C62.23-1995 | IEEE Application Guide for Surge Protection of Electric Generating Plants |
| NEMA ICS 6-1993 (R2006) | Industrial Control and Systems: Enclosures |
| IEEE C37.105 : 2010 | QUALIFYING CLASS 1E PROTECTIVE RELAYS AND AUXILIARIES FOR NUCLEAR POWER GENERATING STATIONS |
| NEMA PB 2:2011 | Deadfront Distribution Switchboards |
| NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
| NEMA ICS 10.2 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 2: STATIC AC TRANSFER EQUIPMENT |
| NEMA ICS 9 : 1993 | INDUSTRIAL CONTROL AND SYSTEMS: POWER CIRCUIT ACCESSORIES |
| IEEE 649-2006 | IEEE Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations |
| ASTM F 1433 : 1997 | Standard Specification for Mechanically Refrigerated Shipboard Air Conditioner |
| UFC 3-535-01 : Change 1 | UNIFIED FACILITIES CRITERIA - VISUAL AIR NAVIGATION FACILITIES |
| NEMA ICS 10.1 : 2005 | INDUSTRIAL CONTROL AND SYSTEMS - PART 1: ELECTROMECHANICAL AC TRANSFER SWITCH EQUIPMENT |
| NEMA ICS 61800-1:2002(R2007) | Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements—Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems |
| IEEE C37.96-2012 | IEEE Guide for AC Motor Protection |
| NEMA ICS 2-1996, Part 8 (R2004, R2009) | INDUSTRIAL CONTROL AND SYSTEMS CONTROLLERS, CONTACTORS, AND OVERLOAD RELAYS RATED NOT MORE THAN 2000 VOLTS AC OR 750 VOLTS DC- PART 8: DISCONNECT DEVICES FOR USE IN INDUSTRIAL CONTROL EQUIPMENT |
| NEMA BU 2 : 1996 | MAJOR REQUIREMENTS RELATED TO THE APPLICATION AND TESTING OF LOW VOLTAGE BUSWAY |
| NEMA ICS 5, Annex B-2002 (R2008) | INDUSTRIAL CONTROL AND SYSTEMS: TYPICAL PROXIMITY SWITCH SPECIFICATIONS |
| NEMA ICS 7.1:2014 | Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems |
| IEEE 45.6-2016 | IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
| IEEE 3001.5-2013 | IEEE Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems |
| ASME HST 4 : 1999 : R2010 | PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS |
| ASME HST 4M : 1991 | PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS |
| ISA 5.2 : 1976 | BINARY LOGIC DIAGRAMS FOR PROCESS OPERATIONS |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| IEEE 3001.11-2017 | IEEE Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems |
| ASME NUM 1 : 2009 | RULES FOR CONSTRUCTION OF CRANES, MONORAILS, AND HOISTS (WITH BRIDGE OR TROLLEY OR HOIST OF THE UNDERHUNG TYPE) |
| ASME HST 4 : 1999 : R2004 | PERFORMANCE STANDARD FOR OVERHEAD ELECTRIC WIRE ROPE HOISTS |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| ASTM D 3638 : 2012 : REDLINE | Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials |
| ANSI C84.1 : 2016 | ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ) |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.