NASM 21083 : 2004
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F
Available format(s)
Hardcopy
Superseded date
04-27-2023
Superseded by
Language(s)
English
Published date
01-01-2004
Publisher
| Committee |
FSC 5310
|
| DevelopmentNote |
Supersedes MS 21083 (H). (03/2000)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
Aerospace Industries Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL-PRF-8805-48 Revision H:2004 | SWITCHES, SENSITIVE, LIMIT, ROLLER LEVER, SELF-RETURN, RESILIANT SEAL, FLUID RESISTANT |
| MIL-PRF-8805-49 Revision J:2012 | Switches, Sensitive, Limit, Rotary Linkage Lever (Nonself-Return), Resilient Seal, Fluid Resistant |
| SAE AMS QQ A 225/9 : 2014 | ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED |
| SAE AMS 4118 : 2014 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.0CU - 0.70MN - 0.60MG - 0.50SI (2017; -T4, -T451), SOLUTION HEAT TREATED |
| SAE AMS QQ P 416 : 2016 | PLATING, CADMIUM (ELECTRODEPOSITED) |
| NASM33588:2010 | NUT, SELF-LOCKING, AIRCRAFT, RELIABILITY AND MAINTAINABILITY USAGE REQUIREMENTS FOR |
| SAE AMS 4123 : 2006 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS AND RODS (7075-T651) SOLUTION AND PRECIPITATION HEAT TREATED |
| ASME Y14.5 : 2009 | DIMENSIONING AND TOLERANCING |
| SAE AMS 4120 : 2002 | ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE, 4.4CU - 1.5MG - 0.60MN (2024), SOLUTION HEAT TREATED AND NATURALLY AGED (T4), SOLUTION HEAT TREATED, COLD WORKED, AND NATURALLY AGED (T351) |
| ASTM A 29/A29M : 2016 : REDLINE | Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought |
| SAE AMS QQ A 225/4 : 2017 | ALUMINUM ALLOY, 2014, BAR, ROD, WIRE AND SPECIAL SHAPES, ROLLED, DRAWN, OR COLD FINISHED |
| SAE AMS QQ A 200/2 : 2014 | ALUMINUM ALLOY 2014, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
| SAE J 403 : 2014 | CHEMICAL COMPOSITIONS OF SAE CARBON STEELS |
| SAE AMS5647K | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED |
| NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
| SAE AMS QQ A 200/11 : 2014 | ALUMINUM ALLOY 7075, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED |
| SAE AMS5080K | STEEL, BARS, FORGINGS, AND TUBING, 0.31 - 0.38C (SAE 1035) |
| SAE AMS 5637 : 2012 | STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH |
| SAE AMS QQ S 763D : 2013(S2015) | STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
| SAE AMS5688L | STEEL, CORROSION-RESISTANT, WIRE, 18CR - 9.0NI (SAE 30302), SPRING TEMPER |
| SAE AS 8879 : 2004 | SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER |
| ASTM D 4066 : 2013 | Standard Classification System for Nylon Injection and Extrusion Materials (PA) |
| SAE AMS5024H | STEEL, BARS, FORGINGS, AND TUBING, FREE-CUTTING, 1.5MN (0.32 - 0.39C) (SAE 1137) |
| ASTM A 493 : 2016 : REDLINE | Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging |
| SAE AMS 2700E : 2011 | PASSIVATION OF CORROSION RESISTANT STEELS |
| SAE AMS5639J | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| SAE AMS5640V:2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, AND FORGINGS, 18CR - 9.0NI, FREE MACHINING |
| SAE AMS5040N | Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade |
| SAE AMS4610N | BRASS, FREE-CUTTING BARS AND RODS 61.5CU - 35ZN - 3.1PB HALF HARD (H02) |
| SAE AMS QQ A 225/6 : 1998 | ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED |
| SAE AMS QQ A 225/5 : 1997 | ALUMINUM ALLOY, 2017, BAR, ROD, AND WIRE, ROLLED, DRAWN, OR COLD FINISHED |
| MS20364 Revision C:1969 | |
| SAE AMS5069G | STEEL BARS, FORGINGS, AND TUBING 0.15 - 0.20C (SAE 1018) |
| SAE AMS5636F | STEEL, CORROSION-RESISTANT, BARS AND WIRE, 18CR - 9.0NI (SAE 30302), SOLUTION HEAT TREATED AND COLD DRAWN, 100 KSI (689 MPA) TENSILE STRENGTH |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.