NASA STD 5005(INT) : 2007
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
Superseded date
03-13-2009
Superseded by
Published date
01-01-2007
Sorry this product is not available in your region.
DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
1.1 Purpose
1.2 Applicability
1.3 Intended Use
2. APPLICABLE DOCUMENTS
2.1 General
2.2 Government Documents
2.3 Non-Government Documents
2.4 Order of Precedence
3. ACRONYMS AND DEFINITIONS
3.1 Acronyms and Abbreviations
3.2 Definitions
4. GENERAL REQUIREMENTS
4.1 General
4.2 Functional Designations
4.3 Characteristics
4.4 Documentation
4.5 Logistics
4.6 Personnel and Training
4.7 Qualification
4.8 Quality Assurance
4.9 Packaging
5. DESIGN AND CONSTRUCTION REQUIREMENTS
5.1 Structural Design
5.2 Mechanical Design
5.3 Electrical/Electronic Design
5.4 Parts
5.5 Electromagnetic Interference (EMI)
5.6 Identification Markings and Labels
5.7 Interchangeability
5.8 Safety
5.9 Human Factors
5.10 Security
5.11 Materials and Processes (M&P)
Appendix A - Sample Material Usage Agreement (KSC Form 21-475)
Appendix B - Deliverables
Appendix C - Reference Documents
Establishes top-level requirements and guidance for design and fabrication of ground support equipment (GSE) to assist NASA space flight programs/projects in providing robust, safe, reliable, maintainable, supportable, and cost-effective GSE.
| DevelopmentNote |
Supersedes NASA STD 5005B. Expiration Date: 07-20-2008. (08/2007)
|
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| NASA STD 6001(INT) : 2009 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| MIL-DTL-5015 Revision H:2000 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| NASA STD 8719.9 : 2015 | LIFTING STANDARD |
| SAE AS 8090 : 2016 | MOBILITY, TOWED AEROSPACE GROUND EQUIPMENT, GENERAL REQUIREMENTS FOR |
| SAE AMS 2759/6 : 2005 | GAS NITRIDING OF LOW-ALLOY STEEL PARTS |
| NASA STD 8739.5 : 2015 | WORKMANSHIP STANDARD FOR FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| SAE J 474 : 1985 | ELECTROPLATING AND RELATED FINISHES |
| AISC 325 : 2017 | STEEL CONSTRUCTION MANUAL |
| NASA STD 8739.1 : 2016 | WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| NASA STD 8739.3 : 1998 | SOLDERED ELECTRICAL CONNECTIONS |
| SAE AMS 2175 : 2010 | CASTINGS, CLASSIFICATION AND INSPECTION OF |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| SAE AMS 2770 : 2015 | HEAT TREATMENT OF WROUGHT ALUMINUM ALLOY PARTS |
| SAE AS 4787 : 2013 | EDDY CURRENT INSPECTION OF CIRCULAR HOLES IN NONFERROUS METALLIC AIRCRAFT ENGINE HARDWARE |
| NASA STD 8739.2 : 1999 | WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY |
| SAE AMS 2647 : 2014 | FLUORESCENT PENETRANT INSPECTION, AIRCRAFT AND ENGINE COMPONENT MAINTENANCE |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| MIL-HDBK-700 Revision A:1975 | PLASTICS |
| AWS C3.5 : 1999 | SPECIFICATION FOR INDUCTION BRAZING |
| NASA STD 4003 : 2013 | ELECTRICAL BONDING FOR NASA LAUNCH VEHICLES, SPACECRAFT, PAYLOADS, AND FLIGHT EQUIPMENT |
| ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
| MIL-STD-1686 Revision C:1995 | ELECTROSTATIC DISCHARGE CONTROL PROGRAM FOR PROTECTION OF ELECTRICAL AND ELECTRONIC PARTS, ASSEMBLIES AND EQUIPMENT (EXCLUDING ELECTRICALLY INITIATED EXPLOSIVE DEVICES) |
| ASME B31.3:2016 | PROCESS PIPING |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| SAE AMS 2759/3 : 2015 | HEAT TREATMENT PRECIPITATION-HARDENING CORROSION-RESISTANT, MARAGING, AND SECONDARY HARDENING STEEL PARTS |
| AWS C3.3 : 2008 | RECOMMENDED PRACTICES FOR THE DESIGN, MANUFACTURE, AND EXAMINATION OF CRITICAL BRAZED COMPONENTS |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-STD-889 Revision C:2016 | DISSIMILAR METALS |
| IPC HDBK 001 : E | HANDBOOK AND GUIDE TO SUPPLEMENT J-STD-001 |
| ISO 15389:2001 | Space systems — Flight-to-ground umbilicals |
| AWS C3.2M/C3.2 : 2008 | STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS |
| IEEE/ASTM SI_10-2010 | American National Standard for Metric Practice |
| AWS C3.4 : 1999 | SPECIFICATION FOR TORCH BRAZING |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| NASA STD 6008(INT) : 2006 | NASA FASTENER MANAGEMENT AND CONTROL PRACTICES |
| SAE AMS 2759/7 : 2010 | CARBURIZING AND HEAT TREATMENT OF CARBURIZING GRADE STEEL PARTS |
| SAE AMS 2759/2 : 2010 | HEAT TREATMENT OF LOW-ALLOY STEEL PARTS MINIMUM TENSILE STRENGTH 220 KSI (1517 MPA) AND HIGHER |
| SAE AMS 2772 : 2016 | HEAT TREATMENT OF ALUMINUM ALLOY RAW MATERIALS |
| NASA STD 8739.4 : 2016 | WORKMANSHIP STANDARD FOR CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| AWS D17.1 : 2001 | SPECIFICATION FOR FUSION WELDING FOR AEROSPACE APPLICATIONS |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| SAE AMS 2759/8 : 2007 | ION NITRIDING |
| SAE AMS 2759/1 : 2009 | HEAT TREATMENT OF CARBON AND LOW-ALLOY STEEL PARTS, MINIMUM TENSILE STRENGTH BELOW 220 KSI (1517 MPA) |
| MIL-HDBK-263 Revision B:1994 | ELECTROSTATIC DISCHARGE CONTROL HANDBOOK FOR PROTECTION OF ELECTRICAL & ELECTRONIC PARTS, ASSEMBLIES & EQUIPMENT |
| MIL-DTL-16878 Revision H:2012 | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-STD-461 Revision G:2015 | REQUIREMENTS FOR THE CONTROL OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF SUBSYSTEMS AND EQUIPMENT |
| SAE AS50861A | WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY |
| SAE AMS H 81200 : 2014 | HEAT TREATMENT OF TITANIUM AND TITANIUM ALLOYS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| AWS C3.6 : 1999 | SPECIFICATION FOR FURNACE BRAZING |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| ASTM E 2375 : 2016 : REDLINE | Standard Practice for Ultrasonic Testing of Wrought Products |
| MIL-STD-1576 Base Document:1984 | ELECTROEXPLOSIVE SUBSYSTEM SAFETY REQUIREMENTS AND TEST METHODS FOR SPACE SYSTEMS |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| NASA HDBK 1001 : 0 | TERRESTRIAL ENVIRONMENT (CLIMATIC) CRITERIA HANDBOOK FOR USE IN AEROSPACE VEHICLE DEVELOPMENT |
| SAE ARP 1247 : 2010 | AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS |
| MMPDS 02 : 2005 | METALLIC MATERIALS PROPERTIES DEVELOPMENT AND STANDARDIZATION (MMPDS) |
| SAE AMS 2759/11 : 2005 | STRESS RELIEF OF STEEL PARTS |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| ASTM D 7194 : 2012 : REDLINE | Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) |
| MIL-HDBK-149 Revision B:1984 | Rubber |
| SAE AMS 2774 : 2016 | HEAT TREATMENT, WROUGHT NICKEL ALLOY AND COBALT ALLOY PARTS |
| AWS C3.7 : 1999 | SPECIFICATION FOR ALUMINUM BRAZING |
| ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
| SAE AMS 2759/5 : 2004 | HEAT TREATMENT, MARTENSITIC CORROSION-RESISTANT STEEL PARTS |
| NASA SPEC 5004 : 0 | WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
| AIAA R 100 : A 2001 | RECOMMENDED PRACTICE FOR PARTS MANAGEMENT |
| NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
| MIL-HDBK-6870 Revision B:2012 | NONDESTRUCTIVE INSPECTION PROGRAM REQUIREMENTS FOR AIRCRAFT AND MISSILE MATERIALS AND PARTS |
| SAE AMS 2759/4 : 2008 | HEAT TREATMENT, AUSTENITIC CORROSION-RESISTANT STEEL PARTS |
| SAE AMS 2759/10 : 2014 | AUTOMATED GASEOUS NITRIDING CONTROLLED BY NITRIDING POTENTIAL |
| MIL-HDBK-17-1 Revision F:2002 | COMPOSITE MATERIALS HANDBOOK - VOLUME 1: POLYMER MATRIX COMPOSITES GUIDELINES FOR CHARACTERIZATION OF STRUCTURAL MATERIALS |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| NASA STD 8739.8 : 2004 | SOFTWARE ASSURANCE STANDARD |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| SAE ARP 4402 : 2013 | EDDY CURRENT INSPECTION OF OPEN FASTENER HOLES IN ALUMINUM AIRCRAFT STRUCTURE |
| MIL-HDBK-695 Revision F:2017 | RUBBER PRODUCTS: RECOMMENDED SHELF LIFE |
| ACI 318 PACK : 2008 | BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-08) & PCA NOTES ON ACI 318-08 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.