NASA STD 5005 : 2013
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT
Published date
01-01-2013
Withdrawn date
07-23-2013
Sorry this product is not available in your region.
DOCUMENT HISTORY LOG
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. ACRONYMS AND DEFINITIONS
4. GENERAL REQUIREMENTS
5. DESIGN AND CONSTRUCTION REQUIREMENTS
6. MATERIALS AND PROCESSES (M&P) REQUIREMENTS
APPENDICES
A - GSE Identification Colors
B - Deliverables
C - Reference Documents and Database
Sets up requirements and guidance for design and fabrication of ground support equipment (GSE) to assist National Aeronautics and Space Administration (NASA) space flight programs/projects in providing robust, safe, reliable, maintainable, supportable, and cost-effective GSE.
| DevelopmentNote |
Supersedes NASA STD 5005(INT). (07/2009)
|
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Withdrawn
|
| Supersedes |
| NASA SSTD 8070 0091 : 2014 | SSC REQUIREMENTS FOR MATERIALS USED IN LOX/GOX SERVICE |
| NASA KSC KTI 5210 : 2012 | MATERIAL SELECTION LIST FOR OXYGEN SERVICE |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
| NASA KSC STD E 0022 : 2013 | BONDING, GROUNDING, SHIELDING, ELECTROMAGNETIC INTERFERENCE, LIGHTNING AND TRANSIENT PROTECTION, DESIGN REQUIREMENTS FOR GROUND SYSTEMS |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| NASA STD 6016 : 2016 | STANDARD MATERIALS AND PROCESSES REQUIREMENTS FOR SPACECRAFT |
| NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| NASA STD 5012 : 2016 | STRENGTH AND LIFE ASSESSMENT REQUIREMENTS FOR LIQUID-FUELED SPACE PROPULSION SYSTEM ENGINES |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| MIL HDBK 17-5 : 0 | COMPOSITE MATERIALS HANDBOOK - VOLUME 5: CERAMIC MATRIX COMPOSITES |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| SAE AMS2404G | Plating, Electroless Nickel |
| NASA STD 8719.9 : 2015 | LIFTING STANDARD |
| ASTM D 4169 : 2016 : REDLINE | Standard Practice for Performance Testing of Shipping Containers and Systems |
| NASA KSC GP 986 : 1993 | DESIGN CRITERIA FOR REUSABLE SPACE VEHICLE UMBILICAL SYSTEMS |
| NASA KSC STD E 0011 : 2009 | ELECTRICAL POWER RECEPTACLES AND PLUGS, STANDARD FOR |
| NASA STD 8739.5 : 2015 | WORKMANSHIP STANDARD FOR FIBER OPTIC TERMINATIONS, CABLE ASSEMBLIES, AND INSTALLATION |
| MIL-HDBK-173 Revision A:1973 | Audio Equipment |
| NASA KSC GP 425 : 1997 | FLUID FITTING ENGINEERING STANDARDS |
| IEEE 1187-2013 REDLINE | IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications |
| MIL-STD-130 Revision N:2007 | Identification Marking of U.S. Military Property |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| MIL-PRF-39012 Revision F:2014 | Connectors, Coaxial, Radio Frequency, General Specification for |
| NASA STD 8739.1 : 2016 | WORKMANSHIP STANDARD FOR POLYMERIC APPLICATION ON ELECTRONIC ASSEMBLIES |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| ASTM E 2217 : 2012 : REDLINE | Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas |
| NASA STD 6001 : 2011 | FLAMMABILITY, OFFGASSING, AND COMPATIBILITY REQUIREMENTS AND TEST PROCEDURES |
| NASA KSC GP 864 VOL 2A : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT CABLE HANDBOOK |
| NASA KSC SPEC Z 0008 : 1978 | FABRICATION AND INSTALLATION OF FLARED TUBE ASSEMBLIES AND INSTALLATION OF FITTINGS AND FITTING ASSEMBLIES, SPECIFICATION FOR |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| SAE AMS2770M | Heat Treatment of Wrought Aluminum Alloy Parts |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| IEEE 1106-2015 REDLINE | IEEE Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vented Nickel-Cadmium Batteries for Stationary Applications |
| MIL-HDBK-700 Revision A:1975 | Plastics |
| NASA STD 4003 : 2013 | ELECTRICAL BONDING FOR NASA LAUNCH VEHICLES, SPACECRAFT, PAYLOADS, AND FLIGHT EQUIPMENT |
| ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
| NASA KSC NE 9187 : 2008 | SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS |
| API 620 : 2013 | DESIGN AND CONSTRUCTION OF LARGE, WELDED, LOW-PRESSURE STORAGE TANKS |
| NASA KSC STD Z 0008 : 1996 | DESIGN OF GROUND LIFE SUPPORT SYSTEMS AND EQUIPMENT, STANDARD FOR |
| ASME B31.3:2016 | PROCESS PIPING |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| SAE AMS2759E | Heat Treatment of Steel Parts General Requirements |
| NFPA 496 : 2017 | PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| GR 409 CORE : ISSUE 2 | GENERIC REQUIREMENTS FOR INDOOR FIBER OPTIC CABLE |
| MIL-HDBK-454 Revision B:2007 | General Guidelines for Electronic Equipment |
| MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
| NASA MSFC STD 486 : 1992 | STANDARD, THREADED FASTENERS, TORQUE LIMITS FOR |
| NASA KSC STD E 0004 : 2008 | PNEUMATIC AND HYDRAULIC MECHANICAL COMPONENTS, ELECTRICAL DESIGN, STANDARD FOR |
| ASHRAE HDBK FUNDAMENTALS : 2013 | ASHRAE HANDBOOK - FUNDAMENTALS |
| ASTM D 5363 : 2016 : REDLINE | Standard Specification for Anaerobic Single-Component Adhesives (AN) |
| SAE AS22759C | Wire, Electrical, Fluoropolymer-Insulated, Copper or Copper Alloy |
| NASA STD 5008 : 2011 | PROTECTIVE COATING OF CARBON STEEL, STAINLESS STEEL, AND ALUMINUM ON LAUNCH STRUCTURES, FACILITIES, AND GROUND SUPPORT EQUIPMENT |
| SAE AMS2423E | Plating, Nickel Hard Deposit |
| ASME PV CODE 10 : 2017 | BOILER AND PRESSURE VESSEL CODE - FIBER-REINFORCED PLASTIC PRESSURE VESSELS |
| GR 20 CORE : ISSUE 4 | GENERIC REQUIREMENTS FOR OPTICAL FIBER AND OPTICAL FIBER CABLE |
| NASA KSC SPEC P 0027 : 2010 | TUBING, SUPERAUSTENITIC STEEL, CORROSION RESISTANT, UNS N08367 AND UNS S31254, SEAMED, BRIGHT ANNEALED, PASSIVATED, SPECIFICATION FOR |
| NASA KSC STD Z 0009 : 1994 | DESIGN OF CRYOGENIC GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| SAE AMS2772G | Heat Treatment of Aluminum Alloy Raw Materials |
| NASA KSC C 123 : 2009 | SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR |
| NASA STD 8739.4 : 2016 | WORKMANSHIP STANDARD FOR CRIMPING, INTERCONNECTING CABLES, HARNESSES, AND WIRING |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| MIL-HDBK-17-4 Revision A:2002 | Composite Materials Handbook - Volume 4 Metal Matrix Composites |
| NASA MSFC STD 3029 : 2000 | GUIDELINES FOR THE SELECTION OF METALLIC MATERIALS FOR STRESS CORROSION CRACKING RESISTANCE IN SODIUM CHLORIDE ENVIRONMENTS |
| SAE AS50151C | Connectors, Electrical, Circular Threaded, AN Type, General Specification For |
| NASA KSC STD Z 0005 : 1988 | DESIGN OF PNEUMATIC GROUND-SUPPORT EQUIPMENT, STANDARD FOR |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| ASTM E 426 : 2016 : REDLINE | Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys |
| ASCE 7 10 : 2010 | MINIMUM DESIGN LOADS FOR BUILDINGS AND OTHER STRUCTURES |
| MIL-DTL-16878 Revision H:2012 | Wire, Electrical, Insulated, General Specification for |
| NASA KSC STD E 0002 : 2009 | HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| MIL-STD-461 Revision G:2015 | Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| SAE AS50861A | Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy |
| IEEE 484-2002 | IEEE Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications |
| NASA-STD-8719.17C:2017 | NASA REQUIREMENTS FOR GROUND-BASED PRESSURE VESSELS AND PRESSURIZED SYSTEMS (PVS) |
| SAE AMSH81200D | Heat Treatment of Titanium and Titanium Alloys |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| SAE AMS2759/9D | Hydrogen Embrittlement Relief (Baking) of Steel Parts |
| NASA HDBK 1001 : 0 | TERRESTRIAL ENVIRONMENT (CLIMATIC) CRITERIA HANDBOOK FOR USE IN AEROSPACE VEHICLE DEVELOPMENT |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NASA MSFC SPEC 445 : 1990 | ADHESIVE BONDING, PROCESS AND INSPECTION, REQUIREMENTS FOR |
| ASTM D 7194 : 2012 : REDLINE | Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE) |
| MIL-HDBK-149 Revision B:1984 | Rubber |
| SAE AMS2774E | Heat Treatment Wrought Nickel Alloy and Cobalt Alloy Parts |
| NASA STD 6002 : 2008 | APPLYING DATA MATRIX IDENTIFICATION SYMBOLS ON AEROSPACE PARTS |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| NASA STD 8719.12 : 2010 | SAFETY STANDARD FOR EXPLOSIVES, PROPELLANTS, AND PYROTECHNICS |
| SAE AMS2403M | Plating, Nickel General Purpose |
| ASTM G 63 : 2015 : REDLINE | Standard Guide for Evaluating Nonmetallic Materials for Oxygen Service |
| NASA MSFC STD 156 : 1962 | RIVETING, FABRICATING AND INSPECTION, STANDARD FOR |
| NASA KSC STD Z 0006 : 1995 | DESIGN OF HYPERGOLIC PROPELLANTS GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| ASME B16.9 : 2012 | FACTORY-MADE WROUGHT BUTTWELDING FITTINGS |
| AIAA R 100 : A 2001 | RECOMMENDED PRACTICE FOR PARTS MANAGEMENT |
| NASA KSC SPEC P 0012 : 1979 | REFRACTORY CONCRETE, SPECIFICATION FOR |
| NASA KSC STD SF 0004 : 2015 | SAFETY STANDARD FOR GROUND PIPING SYSTEMS COLOR CODING AND IDENTIFICATION |
| NEMA ICS 2:2008 | Controllers, Contactors and Overload Relays Rated 600 V |
| MIL-HDBK-6870 Revision B:2012 | Nondestructive Inspection Program Requirements for Aircraft and Missile Materials and Parts |
| NASA KSC KTI 5210 : 2012 | MATERIAL SELECTION LIST FOR OXYGEN SERVICE |
| ASME Y14.100 : 2017 | ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES |
| NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| ADM 1 : 2015 | ALUMINUM DESIGN MANUAL |
| MIL-HDBK-17-1 Revision F:2002 | Composite Materials Handbook Volume 1 - Polymer Matrix Composites Guidelines or Characterization of Structural Materials (S/S by SAE-R422) |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| NASA STD 5009 : 2008 | NONDESTRUCTIVE EVALUATION REQUIREMENTS FOR FRACTURE-CRITICAL METALLIC COMPONENTS - MEASUREMENT SYSTEM IDENTIFICATION: METRIC (INCH-POUND) |
| CFR 49(PTS100-185) : 0 | TRANSPORTATION |
| NASA KSC SPEC Z 0007 : 1994 | TUBING, STEEL, CORROSION RESISTANT TYPES 304 AND 316, SEAMLESS, ANNEALED, SPECIFICATION FOR |
| MIL-HDBK-17-2 Revision F:2002 | Composite Materials Handbook Volume 2. Polymer Matrix Composites Materials Properties (S/S by SAE-R423)) |
| NASA KSC STD 164 : 1992 | ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Sorry this product is not available in your region.
Are you sure?
Logging out.