NASA MSFC STD 156 : 1962
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
RIVETING, FABRICATING AND INSPECTION, STANDARD FOR
07-23-2013
01-01-1962
1. SCOPE
1.0 Scope
1.1 Application
2. APPLICABLE DOCUMENTS
2.1 Government
2.2 Other publications
3. DEFINITIONS
3.1 Rivet
3.2 Pilot hole
3.3 Final hole
3.4 Draw dimpling
3.5 Erco dimpling
3.6 Ram coin dimpling
4. GENERAL REQUIREMENTS
4.1 Rivet symbols
4.2 Cleaning
4.2.1 Deburring
4.2.2 Corrosion protection
4.3 Rivet size
4.4 Dimpling
4.4.1 Coin dimpling
4.4.2 Draw dimpling
4.5 Hole positioning
4.6 General repair
4.6.1 Oversize holes
4.6.2 Supervision of repair
4.6.3 Standard repair records
4.6.4 Defective rivets and rivet holes
4.7 Deviations
5. DETAIL REQUIREMENTS
5.1 Installation of MS20600, MS20601 and Huck (including
Conical keystone Locking (CKL) fasteners
5.1.1 Drilling of holes
5.1.2 Driving the blind fasteners conforming to MS20600
or MS20601 and CKL
5.1.3 Inspection of blind fasteners conforming to Standard
MS20600 or MS20601
5.1.4 Removal of blind fasteners conforming to Standard
MS20600 or MS20601
5.1.5 Inspection of Huck CKL blind fasteners
5.2 Installation of explosive blind fasteners (Standard
MS20602 or MS20603)
5.2.1 Precautions
5.2.2 Drilling of holes
5.2.3 Driving procedure
5.2.4 Use of installation tools
5.2.5 Inspection of explosive blind fasteners
5.3 Installation of hi-shear rivets
5.3.1 Drilling of holes
5.3.2 Hi-shear collars
5.3.3 Installation
5.3.4 Removal methods for hi-shear rivets
5.3.5 Inspection of hi-shear rivets
5.4 Installation of solid rivets
5.4.1 Drilling of holes
5.4.2 Countersinking
5.4.3 Rivet driving
5.4.4 Inspection of standard solid rivets
5.5 Tubular rivets (Standard MS20450 and similar)
5.5.1 Hole size
5.5.2 Installation
5.5.3 General inspection
5.6 Lockbolts - pull type and stump type
5.6.1 Hole size
5.6.2 Installation
5.6.3 General inspection
5.7 Pull fasteners
5.7.1 Use of installation tools
5.7.2 Trim of self-plugging pull rivets
5.7.3 Tapping or hitting heads
5.7.4 Inspection of pull fasteners
5.8 Installation of Deutsch driveplans
5.8.1 Sheet preparation
5.8.2 Machine countersinking
5.8.3 Driving the rivets
5.8.4 Inspection
5.8.5 Removal of rivets
5.9 Skin deformation
5.10 Countersinking
5.10.1 Hi-shear rivet
5.10.2 Nominal diameters for countersinks
Establishes the requirements for fabrication and inspection of rivets and fasteners and the procedures for riveting operations.
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Withdrawn
|
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASA KSC STD E 0001 : 2008 | DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR |
| MS20601 Revision J:1992 | RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, 100 DEG FLUSH HEAD, TYPE II |
| MIL P 8585 : LATEST | PRIMER COATING, ZINC CHROMATE, LOW-MOISTURE SENSITIVITY |
| MS 20603 : B | RIVET, BLIND, CHEMICALLY EXPANDED, 100 DEGREES FLUSH HEAD, TYPE 1, CLASS 2, STYLES A AND B |
| MS20470 Revision H:1993 | RIVET, SOLID UNIVERSAL HEAD, ALUMINUM ALLOY AND TITANIUM COLUMBIUM ALLOY |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MS20600 Revision J:1992 | RIVET, BLIND, STRUCTURAL PULL STEM, SELF-PLUGGING, PROTRUDING HEAD, TYPE 2 |
| MS20426 Revision L:1993 | RIVET, SOLID, COUNTERSUNK 100 DEG PRECISION HEAD, ALUMINUM AND TITANIUM COLUMBIAN ALLOY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.