
MIL-STD-2148 Revision A:2016
Current
The latest, up-to-date edition.

Vibration Damping Materials, Procedures for Installation, Maintenance, and Repairs
English
09-06-2016
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Sets up uniform standards for the selection, installation, maintenance, and repair of currently-approved vibration damping materials, except those used for mounts, pipe damping, Dynamic Nonlinear Vibration Dissipators (DNVD), and axial stave damping.
DocumentType |
Standard
|
Pages |
79
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
This standard practice establishes uniform standards for the selection, installation, maintenance, and repair of currently-approved vibration damping materials, except those used for mounts, pipe damping, Dynamic Nonlinear Vibration Dissipators (DNVD), and axial stave damping. Information on mounts and pipe damping may be found in NAVSHIPS 0939-001-2010. It specifies the types of damping materials to be used in both submarines and surface ships, delineates those areas where the treatments normally are applied, and provides procedures for their installation and maintenance. Details for inspection, repair, and installation of DNVD tiles may be found in NAVSEA Drawing 630-6406489. Details for inspection, repair, installation, and replacement of axial stave damping may be found in NAVSEA S9073-AF-SNC-010(C). This document is intended to supplement individual ship specifications, and to provide guidance in those instances where specific direction has not been made available in the form of ship specifications.
MIL-DTL-24487 Revision B:2005 | Tile, Rubber Vibration Damping, Type V |
SAE AMSQQA250/8C | Aluminum Alloy 5052, Plate and Sheet |
MIL-DTL-24441-20 Revision B:2009 | Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type III |
ASTM A 1008/A1008M : 2016-09 | SPECIFICATION FOR STEEL, SHEET, COLD-ROLLED, CARBON, STRUCTURAL, HIGH-STRENGTH LOW-ALLOY, HIGH-STRENGTH LOW-ALLOY WITH IMPROVED FORMABILITY, SOLUTION HARDENED, AND BAKE HARDENABLE |
A-A-50169 Revision B:2011 | Skin Protective Compounds, Chemical Barrier |
MIL-C-24576 Revision A:1987 | CLOTH, SILICA GLASS, CLOTH, COATED, GLASS, SILICONE RUBBER COATED |
MIL-DTL-24441-29 Revision B:2009 | Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type IV |
MIL-DTL-24441-30 Revision B:2009 | Paint, Epoxy-Polyamide, Haze Gray, Formula 151, Type IV |
MIL-DTL-24441-22 Revision B:2009 | Paint, Epoxy-Polyamide, White Formula 152, Type III |
CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
MIL-DTL-24441-21 Revision B:2009 | Paint, Epoxy-Polyamide, Haze Gray Formula 151, Type III |
MIL-D-16791 Revision G:1990 | Detergents, General Purpose (Liquid, Nonionic) |
MIL-PRF-24647 Revision E:2013 | Paint System, Anticorrosive and Antifouling, Ship Hull |
SSPC-SP 11 : 2012 | POWER-TOOL CLEANING TO BARE METAL |
MIL-A-24456 Base Document:1971 | Adhesive for Plastic Vibration-Damping Tile |
ASTM A 666 : 2015 : REDLINE | Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar |
MIL-DTL-24487 Revision B:2005 | Tile, Rubber Vibration Damping, Type V |
CFR 29(PTS1911-1925) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
MIL-PRF-24712 Revision B:2014 | Coatings, Powder, Thermosetting |
NASM25027:2012 | NUT, SELF-LOCKING, 250 DEGREES F, 450 DEGREES F, AND 800 DEGREES F |
NASM17830:2017 | NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEGREES F AND 450 DEGREES F, NON-METALLIC INSERT, 300 SERIES CRES |
MIL-DTL-24441 Revision D:2009 | Paint, Epoxy-Polyamide, General Specification for |
MIL-PRF-23653 Revision D:2009 | Plastic Tiles, Vibration Damping |
MIL-DTL-24441-35 Revision B:2009 | Paint, Epoxy-Polyamide, Red, Formula 156, Type IV |
MIL-R-21607 Revision E:1990 | Resins, Polyester, Low Pressure Laminating, Fire-Retardant |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
MIL-C-22230 Revision B:1987 | Cleaning Compound, Fuel Tank and Bilge |
NAVSEA T9074 AD GIB 010/1688 : 0 | REQUIREMENTS FOR FABRICATION, WELDING AND INSPECTION OF SUBMARINE STRUCTURE |
MIL S 901 : D | SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
ASTM B 209 : 2014 : REDLINE | Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate |
MIL-S-24149-1 Revision D:1988 | Stud, Welding, and Arc Shields (Ferrules); Type I, Class 1, 2, 3, and TypeII, Class 1, 4, 5, 5A, 6, Carbon Steel, for Direct Energy, Arc Welding |
MIL-STD-1689 Revision A:1990 | FABRICATION, WELDING, AND INSPECTION OF SHIPS STRUCTURE |
MIL-STD-1474 Revision E:2015 | Noise Limits |
MIL-P-22581 Revision C:1991 | Plastic Tiles, Vibration Damping, Type III |
TT-I-735 Revision A:1963 | Isopropyl Alcohol |
MIL-S-24149 Revision C:1989 | Studs, Welding, and Arc Shields (Ferrules), General Specification for |
MIL-S-24149-3 Revision D:1989 | Studs, Welding, & Arc Shields (Ferrules); Type V, Class 1, 4, 5, 5A, Corrosion- Resistant Steel, for Direct Energy Arc Welding |
MIL-DTL-24441-31 Revision B:2009 | Paint, Epoxy-Polyamide, White, Formula 152, Type IV |
NASM17829:2012 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEGREES F, NON-METALLIC INSERT, NON-CRES STEEL |
L-P-535 Revision E:1979 | Plastic Sheet (Sheeting): Plastic Strip: Poly (Vinyl Chloride) and Poly (Vinyl chloride-Vinyl Acetate), Rigid |
MIL-I-631 Revision D:1961 | Insulation, Electrical, Synthetic - Resin Composition, Nonrigid |
MIL-P-17549 Revision D:1981 | Plastic Laminates, Fibrous Glass Reinforced, Marine Structural |
MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
SSPC-SP 7 : 2015 | BRUSH-OFF BLAST CLEANING |
MIL-DTL-24441-37 Revision B:2009 | Paint, Epoxy-Polyamide, Yellow, Formula 158, Type IV |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.