MIL-STD-202-215 Base Document:2015
NA
NA
Status of Standard is Unknown
METHOD 215, RESISTANCE TO SOLVENTS
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1. SCOPE
2. APPLICABLE DOCUMENTS
3. DEFINITIONS
4. GENERAL REQUIREMENTS
5. DETAILED REQUIREMENTS
6. NOTES
Aim of this test is as follows: a) To verify that markings or color coding will not become illegible or discolored on the parts (including printed wiring boards) when subjected to solvents and processes normally used to clean solder flux, fingerprints, and other contaminants from printed-wiring and terminal-board assemblies, etc, and b) To verify that component protective coatings and encapsulant materials are not degraded to the point where electrical or mechanical integrity is disturbed when subjected to solvents and processes normally used to clean solder flux, fingerprints, and other contaminants from printed wiring and terminal board assemblies, etc.
| Committee |
FSC 59GP
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
NA
|
| MIL-R-10509 Revision J:2007 | RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| MIL-PRF-94 Revision G:2006 | Resistor, Variable, Composition, General Specification for |
| MIL-PRF-83383 Revision F:2017 | Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
| MIL-DTL-39030 Revision F:2014 | DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-PRF-914 Revision C:2008 | RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-32192 Base Document:2005 | RESISTOR, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR |
| MIL-PRF-32159 Base Document:2004 | Resistor, Chip, Fixed, Film, Zero OHM, Industrial, High Reliability, Space Level, General Specification for |
| MIL-PRF-39017 Revision G:2006 | RESISTOR, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-PRF-39003 Revision N:2016 | Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for |
| MIL-PRF-49467 Revision C:2005 | Capacitor, Fixed, Ceramic, Multilayer, High Voltage (General Purpose), General Specification For |
| MIL-PRF-8805 Revision G:2016 | SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR |
| MIL-PRF-55342 Revision H:2003 | RESISTOR, CHIP, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL-PRF-55182 Revision J:2017 | RESISTOR, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL-PRF-28861 Revision E:2016 | FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| MIL-PRF-22885-115 Base Document:2012 | SWITCHES, PUSHBUTTON, ULTRA-COMPACT, LED ILLUMINATION, NVIS, SEALED |
| MIL-PRF-23269 Revision H:2016 | CAPACITOR, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-49465 Revision C:2007 | RESISTOR, FIXED, METAL ELEMENT, POWER TYPE, VERY LOW RESISTANCE VALUES, GENERAL SPECIFICATION FOR |
| MIL-DTL-12883 Revision F:2003 | Sockets and Accessories for Plug-in Electronic Components, General Specification for |
| MIL-PRF-39022 Revision J:2015 | Capacitor, Fixed, Metallized, Paper-Plastic Film or Plastic Film Dielectric, Direct and Alternating Current, (Hermetically Sealed in Metal or Ceramic Cases), Established Reliability, General Specification for |
| MIL-PRF-39019 Revision F:2010 | Circuit Breakers, Magnetic, Low-Power Sealed, Trip-Free General Specification for |
| MIL-PRF-32560-6 Base Document:2016 | COIL, RADIO FREQUENCY, CHIP, FIXED, OPEN CONSTRUCTION ESTABLISHED RELIABILITY, SURFACE MOUNT, 0603 SIZE |
| MIL-PRF-19978 Revision L:2016 | Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for |
| MIL-PRF-39014 Revision J:2016 | Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for |
| MIL-PRF-23648 Revision F:2005 | Resistor, Thermal (Thermistor) Insulated, General Specification for |
| MIL-R-83516 Revision C:2017 | Relays, Reed, Dry, General Specification for (No S/S Document) |
| MIL-PRF-28750 Revision J:2017 | RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR |
| MIL-PRF-39005 Revision G:2013 | Resistor, Fixed, Wirewound (Accurate), Nonestablished Reliability, Established Reliability, General Specification for |
| MIL-PRF-11693 Revision E:2012 | CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR |
| MIL-PRF-39001 Revision E:2009 | Capacitor, Fixed, MICA Dielectric, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-55514 Revision G:2013 | Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for |
| MIL-DTL-8834 Revision K:2016 | Switches, Toggle, Positive Break, General Specification for |
| MIL-PRF-49470 Revision D:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-6106 Revision P:2014 | Relays, Electromagnetic General Specification for |
| IEC PAS 62686-2:2016 | Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components |
| PD IEC/PAS 62686-2:2016 | Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for passive components |
| MIL-DTL-83725 Revision E:2017 | Relays, Vacuum, General Specification for |
| MIL-PRF-83421 Revision F:2017 | CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39016 Revision H:2017 | Relays, Electromagnetic, Established Reliability, General Specification for |
| MIL-PRF-83530 Revision C:2008 | RESISTOR, VOLTAGE SENSITIVE (VARISTOR, METAL-OXIDE), GENERAL SPECIFICATION FOR |
| MIL-PRF-28776 Revision H:2017 | Relays, Hybrid, Established Reliability, General Specification for |
| MIL-PRF-83536 Revision F:2017 | RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR |
| MIL-DTL-5757 Revision N:2017 | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-83726 Revision H:2017 | Relays, Hybrid and Solid State, Time Delay, General Specification for |
| MIL-PRF-39015 Revision E:2006 | RESISTOR, VARIABLE, WIREWOUND, (LEAD SCREW ACTUATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-81 Revision G:2017 | CAPACITOR, VARIABLE, CERAMIC DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-22684 Revision F:2006 | RESISTOR, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR |
| MIL-PRF-39007 Revision J:2005 | Resistor, Fixed, Wirewound, (Power Type) Nonestablished Reliability, Established Reliability, and Space Level General Specification for |
| MIL-PRF-39006 Revision G:2006 | CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-PRF-39010 Revision E:1997 | Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for |
| MIL-PRF-94-7 Revision C:2006 | RESISTOR, VARIABLE, NONWIRE WOUND PRINTED CIRCUIT BROAD MOUNTING, STYLE RV8 |
| MIL-PRF-20 Revision N:2017 | CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL PRF 55365 : 0012 | CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| DSCC 89065 : C | GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR |
| DSCC 04003 : E | CAPACITOR, TANTALUM, HYBRID, HERMETICALLY SEALED |
| MIL-PRF-680 Revision C:2010 | DEGREASING SOLVENT |
| TT-I-735 Revision A:1963 | ISOPROPYL ALCOHOL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.