MIL-STD-1903 Base Document:1988
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
NUTS, PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
Available format(s)
PDF
Published date
08-26-1988
Publisher
Withdrawn date
04-03-1995
US$20.00
Excluding Tax where applicable
Specifies configuration, size, materials and protective coatings and finishes of nuts recommended for design engineers' use in weapons systems and equipment.
| DocumentType |
Standard
|
| Pages |
136
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
The purpose of this bookform standard is to provide a commodity type parts document on nuts to aid military equipment designers and engineers in the selection of preferred nuts.
| MIL-HDBK-2193 Base Document:1994 | Hydraulic System Components, Ship (S/S by MIL-STD-2193) |
| MS24680 Revision F:1990 | NUT, PLAIN, CAP, HIGH CROWN UNC-2B AND UNF-2B (S/S BY A-A-55628) |
| MS3186 Revision G:2011 | Connector, Mounting to Connectors, Mounting Nuts, Plain Hexagon |
| MS21054 Revision E:1985 | NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21054) |
| MS17830 Revision E:1998 | NUT, SELF-LOCKING, HEXAGON-REGULAR, 250 DEG. F, AND 450 DEG. F (NON-METALLIC INSERT), 300 SERIES CORROSION RESISTANT STEEL (S/S NASM17830) |
| MS9362 Revision A:1968 | NUT, PLAIN, HEXAGON, CHECK A-286, SILVER PLATED, MIL-S-8879 (S/S BY SAE-AS9362) |
| MS14182 Revision B:1989 | NUT, SELF-LOCKING, EXTENDED WASHER, ROUND, NICKEL ALLOY 718, 220 KSI FTU, 450 DEGREE F AND 800 DEGREE F, SPLINE DRIVE (S/S BY NASM14182) |
| MS21067 Revision G:1994 | NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21067) |
| MS21074 Revision F:1987 | NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI, FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21074) |
| MS9358 Revision C:1994 | NUT, CASTELLATED, HEXAGON-A-286 (S/S BY SAE-AS9358) |
| MS21043 Revision E:1994 | NUT, SELF-LOCKING, 800 DEG. F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, CORROSION RESISTANT STEEL (S/S BY NASM21043) |
| MS21046 Revision D:1987 | NUT, SELF LOCKING, HEXAGON-REGULAR HEIGHT, 800 DEG. F, 125 KSI FTU (ASG) (S/S BY NASM21046) |
| MS21044 Revision H:1993 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F, 125 KSI FTU AND 60 KSI FTU (S/S BY NASM21044) |
| MIL N 45938/11 : 0 | NUT, PLAIN, CLINCH & NUT, SELF LOCKING, CLINCH (FLOATING 400 DEG.F) |
| NAS1774:2012 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CBORED, FLOATING, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS21084 Revision B:1986 | NUT, SELF LOCKING, STEEL, 220 KSI FTU, 450 DEG. F., FLANGED, MS33787 WRENCHING ELEMENT (NASM21084) |
| MS9100 Revision B:1974 | NUT - HEX, BOSS CONNECTION, CRES (S/S BY SAE-AS91001) |
| MS21073 Revision G:1994 | NUT, SELF-LOCKING, PLATE, CORNER, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125KSI FTU, 450 DEG. F (S/S BY NASM21073) |
| MS9200 Revision C:1986 | Nut, Plain, Hex, Boss Connection, Aluminum (S/S by SAE-AS92001) |
| NAS671:2014 | NUT, PLAIN, HEXAGON, SMALL PATTERN, NONSTRUCTURAL |
| MS21086 Revision D:1995 | NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21086) |
| MS21070 Revision F:1987 | NUT, SELF-LOCKING, PLATE, TWO LUG, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21070) |
| MS27128 Revision D:1976 | Nut, Welding-Pilot |
| MS21087 Revision B:1991 | NUT, SELF-LOCKING, PLATE, SIDE BY SIDE REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21087) |
| MS51471 Base Document:1983 | Nut, Plain, Hexagon (JAM), Carbon Steel, UNC-2B (No S/S Document) |
| MS17829 Revision E:1987 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 250 DEG. F., (NON METALLIC INSERT) NON-CORROSION-RESISTANT STEEL (S/S BY NASM17829) |
| MS35692 Revision B:1966 | Nut, Slotted, Hexagon, UNC-2B and UNF-2B |
| MS51866 Revision A:1976 | NUT, SELF-LOCKING, SPLINE-GENERAL PURPOSE, 250 DEG. F |
| MS 51979 : A | GUN, ANTI TANK, SELF PROPELLED 90 MM, M56 |
| MS21049 Revision F:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG. CSK LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F. (S/S BY NASM21049) |
| MS9359 Revision B:1986 | NUT, CASTELLATED, HEXAGON - A-286, SILVER PLATED (S/S BY SAE-AS9359) |
| MS21059 Revision J:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21059) |
| NAS1291:2010 | NUT, SELF-LOCKING, HEXAGON, LOW HEIGHT, LIGHT WEIGHT |
| MS21304 Revision B:1987 | NUT, PLAIN, SQUARE |
| MS17828 Revision J:1989 | NUT, SELF-LOCKING, HEXAGON, REGULAR-HEIGHT, (NON-METALLIC INSERT) 250 DEG. F, NICKEL-COPPER ALLOY (S/S BY NASM17828) |
| MIL-N-45938-10 Base Document:1980 | NUT, PLAIN, CLINCH AND NUT, SELF LOCKING, CLINCH (SELF CLINCHING) ROUND (S/S BY NASM45938/10) |
| MS27130 Revision F:1987 | Nut, Plain, Blind Rivet-Flat and Countersunk Head, Open End (S/S by NAS1329 and NAS1330) |
| MIL-N-45938-6 Revision C:1995 | NUT, SELF-LOCKING, CLINCH, (SWAGE-CLINCHING, KNURLED SHANK, MINIATURE, 450 DEG. F, OR 800 DEG. F) (S/S BY NASM45938/6) |
| MS9881 Revision B:1982 | Nut, Plain, Hexagon-AMS 6322, Cadmium Plate MIL-S-8879 (S/S by SAE-AS9881) |
| NAS446:1992 | NUT - FLAT TYPE SHEET SPRING |
| MIL-N-45938-9 Revision A:1985 | NUT, SELF LOCKING, CLINCH (SWAGE CLINCHING, KNURLED SHANK, 250 DEG. F, UNJF-3B) (S/S BY NASM45938/9) |
| MS27151 Revision B:1976 | Nut, Stamped - Standard Type |
| MS9356 Revision F:1994 | NUT, PLAIN, HEXAGON-A-286 (S/S BY SAE-AS9356) |
| MS35426 Revision E:1977 | NUT, PLAIN, WING, UNF-2B |
| MS9361 Revision C:1994 | NUT, PLAIN, HEXAGON, CHECK-A-286 (S/S BY SAE-AS9361) |
| MS51468 Base Document:1983 | NUT, PLAIN, WING, CARBON STEEL, UNC-2B |
| MS21078 Revision G:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21078) |
| MS21081 Revision D:1993 | NUT, SELF-LOCKING, PLATE, CORNER, NON-METTALIC INSERT, STEEL, 125KSI FTU, 250 DEG. F (S/S BY NASM21081) |
| MS51984 Revision F:1980 | NUT, PLAIN, CONE SEAT, HEXAGON: WHEEL MOUNTING, 1/2 INCH (NO S/S DOCUMENT) |
| MS35649 Revision H:1988 | NUT, PLAIN, HEXAGON, MACHINE SCREW, UNC-2B (S/S BY NASM35649) |
| MS14145 Revision C:1994 | NUT, SELF-LOCKING, LIGHTWEIGHT, THIN, CASTELLATED, 450 DEG. F (S/S BY NASM14145) |
| NAS1773:2012 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CBORED, FLOATING, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS16228 Revision A:1968 | NUT, SELF-LOCKING, HEXAGON-THIN, UNC 3B (NON METALLIC INSERT) AUSTENITIC CORROSION RESISTANT STEEL, NONMAGNETIC, 250 DEG. F (S/S BY NASM16228) |
| NAS 1791:2015 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, VARIABLE COUNTERBORE, REPLACEABLE NUT ELEMENT, 125 KSI FTU, 450 DEGREES F AND 800 DEGREES F |
| MS21056 Revision F:1987 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21056) |
| MS20500 Revision G:2012 | Nut, Self Locking, Hexagon, 1200 Degrees F, 125 KSI FTU |
| MIL-N-45938-2 Revision A:1987 | NUT, PLAIN, CLINCHCVAND NUT, SELF LOCKING, CLINCH (HEXAGON HEAD AND SHANK, SWAGE CLINCH) (S/S BY NASM45938/2) |
| NAS 1775 : 2016 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, C'BORED, REDUCED RIVET SPACING, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS21053 Revision D:1978 | NUT, SELF-LOCKING, PLATE, ONE LUG, 100 DEG. CSK LOW HEIGHT, ALLOY STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21053) |
| MS21057 Revision G:1994 | NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT, ALLOY STEEL, 125 KSI FTU, 450 DEG. F. (S/S BY NASM21057) |
| NAS1735:2015 | NUT, SELF-LOCKING, BLIND RIVET, ELLIPTICAL HEAD, CLOSED END, 450 DEGREES F |
| MS21061 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21061) |
| MS21077 Revision H:1994 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21077) |
| MIL-N-45938-4 Revision A:1987 | NUT, PLAIN, CLINCH (SELF-CLINCHING, FLUSH) (S/S BY NASM45938/4) |
| MS9360 Revision B:1986 | NUT, PLAIN, HEX-DRILLED - A-286, SILVER PLATED (S/S BY SAE-AS9360) |
| MS9099 Revision C:1993 | NUT - HEX, BOSS CONNECTION, ALUMINUM (S/S BY SAE-AS90991) |
| AN315 Revision 10:1972 | NUT, PLAIN, AIRFRAME (S/S BY NASM315) |
| MS51970 Revision A:1974 | NUT, PLAIN, HEXAGON-BRASS, BLACK CHEMICAL FINISH, UNF-2B |
| MS21072 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21072) |
| MS51922 Revision E:1976 | NUT, SELF-LOCKING, HEXAGON-PREVAILING TORQUE, GENERAL PURPOSE, 250 DEG. F, UNC-2B AND UNF-2B (S/S BY MIL-DTL-45913) |
| MIL-N-45938-3 Revision B:1988 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING, KNURLED COLLAR, 450 DEG. F. AND 600 DEG. F.) (S/S BY NASM45938/3) |
| MS9363 Revision C:1994 | NUT, SLOTTED, HEXAGON-SHEAR, A-286 (S/S BY SAE-AS9363) |
| MIL-N-45938-12 Revision B:1988 | NUT, PLAIN, SPLINE, ROUND (S/S BY NASM45938/12) |
| MS14210 Revision A:1993 | NUT,FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A. R. E), 450 DEG. F, CRES (A-286), 125 KSI FTU, REPLACEABLE NUT ELEMENT (S/S BY NASM14210) |
| NAS1779:2016 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT CBORED, FLOATING, REDUCED RIVET SPACING, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS21079 Revision F:1994 | NUT, SELF-LOCKING, GANG CHANNEL, NON-METALLIC INSERT, 125 KSI FTU, 250 DEG. F (S/S BY NASM21079) |
| MS14164 Revision A:1991 | NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 220 KSI FTU, 450 DEG. F SPLINE, DRIVE (S/S BY NASM14164) |
| MS21080 Revision D:1993 | NUT, SELF-LOCKING, PLATE, ONE LUG, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21080) |
| NAS1033:2016 | NUT, SELF-LOCKING, PLATE, RIGHT ANGLE, REGULAR HEIGHT, CBORE, FLOATING |
| MS21085 Revision A:1978 | NUT, SELF-LOCKING, STEEL, 260 KSI FTU, 450 DEG. F, FLANGED, MS33787 WRENCHING ELEMENT (S/S BY NASM21085) |
| MS21047 Revision F:1994 | NUT, SELF-LOCKING, PLATE, TWO-LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21047) |
| MS51969 Revision C:2011 | Nut, Plain, Hexagon - Brass, Black Chemical Finish, UNC-2B |
| MS16211 Revision A:1966 | NUTS, PLAIN, SQUARE, REGULAR, UNFINISHED, COPPER-SILICON ALLOY, UNC-2B NONMAGNETIC |
| MS90723 Base Document:1963 | Nut, Sheet Spring and J Type |
| MIL-STD-1515 Revision A:1978 | Fastener Systems for Aerospace Applications (S/S by NASM1515) |
| NAS1776:2011 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CBORED, REDUCED RIVET SPACING, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS21045 Revision L:1994 | NUT, SELF-LOCKING HEXAGON-REGULAR HEIGHT, 450 DEG. F, 125 KSI FTU (S/S BY NASM21045) |
| MS21050 Revision D:1978 | NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEG CSK. LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG AND 800 DEG F (S/S BY NASM21050) |
| MIL-N-45938-1 Revision B:1984 | NUT, PLAIN, CLINCH (SELF-CLINCHING, ROUND) (S/S BY NASM45938/1) |
| MS21066 Revision G:1994 | NUT, SELF-LOCKING GANG CHANNEL, 100 DEG. CSK, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21066) |
| MS21051 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21051) |
| MS21224 Revision D:1993 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON, COUNTERBORED, ASSEMBLED WASHER, 250 DEG. F, NON-METALLIC INSERT (FOR SELF-RETAINING BOLTS) (S/S BY NASM21224) |
| NAS1329:2014 | NUT, BLIND RIVET, FLAT HEAD, INTERNAL THREAD, NON-LOCKING (FREE-RUNNING) AND SELF-LOCKING (PREVAILING TORQUE) |
| MS9882 Base Document:1968 | NUT, PLAIN, HEX - DRILLED, AMS 6322, CADMIUM PLATE MIL-S-8879 (S/S BY SAE-AS9882) |
| MS21062 Revision E:1987 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21062) |
| MS3214 Base Document:1968 | NUT, PLAIN, CLINCH-FLUSH (S/S BY NASM3214) |
| MS21060 Revision F:1987 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (ASG) (S/S BY NASM21060) |
| NAS1423:2013 | NUT, PLAIN, HEXAGON, DRILLED JAM, THIN |
| MS27952 Revision A:1968 | Nut, Plain-Hexagon, Jam, Left Hand |
| MS24679 Revision E:1990 | NUT, PLAIN, CAP, LOW CROWN, UNC-2B AND UNF-2B (S/S BY A-A-55629) |
| MS35650 Revision G:1985 | NUT, PLAIN, HEXAGON, MACHINE SCREW, UNF-2B (S/S BY NASM35650) |
| MS9201 Revision B:1986 | NUT, PLAIN, HEX, BOSS CONNECTION, CORROSION RESISTANT STEEL (S/S BY SAE-AS9201) |
| MS21064 Revision G:1994 | NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21064) |
| MS9357 Revision B:1986 | NUT, PLAIN, HEXAGON - A-286, SILVER PLATED (S/S BY SAE-AS9357) |
| AN320 Revision 14:1996 | NUT, PLAIN, CASTELLATED, SHEAR (S/S BY NASM320) |
| NAS1771:2013 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CBORED, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS51857 Base Document:1969 | NUT, PUSH-ON, STEEL |
| NAS1473:2016 | NUT, SELF-LOCKING, PLATE, TWO LUG, CAP, FLOATING |
| MS21225 Revision A:1968 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON - 800 DEG. F (S/S BY NASM21225) |
| MS21076 Revision H:1991 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21076) |
| MS21055 Revision G:1994 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21055) |
| NAS1770:2016 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CBORE, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| NAS1731:2016 | NUT, BLIND, SERRATED HEAD, SELF-LOCKING, 450 DEGREES F |
| MS17826 Revision H:1988 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON 250 DEG. F, THIN NON-METALLIC INSERT |
| NAS1777:2012 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CBORED, REDUCED RIVET SPACING, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS51858 Revision B:1973 | NUT, PLAIN HEXAGON, PLASTIC NYLON |
| MS33737 Revision B:1988 | NUT, SHEET SPRING, INSTRUMENT MOUNTING (S/S BY NASM33737) |
| NAS 1772:2012 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, CBORED, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS51972 Revision A:1969 | Nut: Square, Hexagon, Cap, Slotted, Castle, Knurled, Welding and Single Ball Seat |
| MS21052 Revision F:1987 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG AND 800 DEG F (S/S BY NASM21052) |
| MS17825 Revision J:2011 | Nut, Self-Locking, Castellated, Hexagon, 250 Degrees F Non-Metallic Insert |
| MS51469 Base Document:1983 | Nut, Plain, Hexagon (Machine Screw), Carbon Steel, UNC-2B |
| MS21075 Revision H:1995 | Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 KSI FTU, 450 Degree F (S/S BY NASM21075) |
| MS51865 Revision A:1976 | Nut, Self-Locking, Cap-General Purpose, 250 Deg., F |
| NAS1474:2016 | NUT, SELF-LOCKING, PLATE, TWO LUG, CAP, FLOATING, REDUCED RIVET SPACING |
| MS51473 Base Document:1983 | NUT, PLAIN, HEXAGON, CARBON STEEL, UNF-2B |
| NAS1734:2015 | NUT, SELF-LOCKING, BLIND RIVET, ELLIPTICAL HEAD, 450 DEGREES F |
| NAS577:2016 | NUT, SELF-LOCKING, BARREL, FLOATING, 180 KSI FTU |
| MS21058 Revision D:1978 | NUT, SELF-LOCKING, PLATE, CORNER, 100 DEG. CSK, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F (S/S BY NASM21058) |
| MS51971 Revision D:2011 | Nut, Plain, Hexagon-Steel, Corrosion Resisting, 300 Series, Passivated, UNC-2B |
| MIL-N-45938-8 Revision A:1985 | NUT, SELF LOCKING, CLINCH (SWAGE CLINCHING, KNURLED SHANK, 250 DEG. F) (S/S BY NASM45938/8) |
| MS21245 Revision D:1988 | NUT, SELF-LOCKING, HEXAGON, THIN, 450 DEGREE F, 80 KSI FTU (S/S BY NASM21245) |
| MS21069 Revision G:1994 | NUT, SELF-LOCKING, PLATE, TWO-LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21069) |
| MIL-N-45938-5 Revision A:1984 | NUT, SELF-LOCKING, CLINCH (SWAGE-CLINCHING, KNURLED SHANK, MINIATURE, 250 DEG. F) (S/S BY NASM45938/5) |
| MS14200 Revision B:1995 | NUT, FLOATING, SELF LOCKING, ATTACHED RETENTION ELEMENT (A.R.E.) 450 DEG. F, STEEL, 125 KSI FTU, REPLACEABLE NUT ELEMENT (S/S BY NASM14200) |
| MS16994 Revision F:2011 | Nut, Plain, Knurled |
| NAS1782:2015 | NUT, SELF-LOCKING, PLATE, CORNER, LOW HEIGHT, 100° CSK, 160 KSI, 450 °F, 800 °F |
| AN256 Revision 5:1983 | NUT - SELF LOCKING, PLATE, RIGHT ANGLE, 250 DEG. F (S/S BY NASM256) |
| MS27127 Revision D:1976 | Nut, Welding - Without Pilot |
| MIL-N-45938-7 Revision C:1993 | NUT, PLAIN CLINCH AND NUT, SELF-LOCKING CLINCH (KNURLED COLLAR, MINIATURE, 450 DEG. F) (S/S BY NASM45938/7) |
| NAS1780:2011 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, 100 DEGREES CSK, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS14156 Base Document:1974 | NUT, WHEEL, SELF-LOCKING, FLANGED, STEEL, 180 KSI FTU, 450 DEG. F, SPLINE DRIVE (S/S BY NASM14156) |
| MS21071 Revision G:1994 | NUT, SELF-LOCKING, PLATE, ONE LUG, REDUCED RIVET SPACING, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEG. F (S/S BY NASM21071) |
| NAS1778:2012 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, CBORED, SIDE BY SIDE, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| MS21068 Revision F:1987 | NUT, SELF-LOCKING, CHANNEL, 100 DEG CSK, FLOATING, LOW HEIGHT, CRES, 125KSI FTU, 450 DEG F AND 800 DEG F (S/S BY NASM21068) |
| MS35425 Revision E:1977 | Nut Plain, Wing, UNC-2B |
| NAS 1766:2011 | NUT, SELF-LOCKING, PLATE, CORNER, COUNTERBORED, FLOATING, 125 KSI FTU, 450 DEGREES F AND 800 DEGREES F |
| MS21063 Revision H:1994 | NUT, SELF-LOCKING GANG CHANNEL, FLOATING, LOW HEIGHT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21063) |
| MS27040 Revision B:1974 | NUT, PLAIN, SQUARE-STEEL, CADMIUM PLATED |
| MS21065 Revision E:1978 | NUT, SELF-LOCKING, CHANNEL, FLOATING, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. F AND 800 DEG. F (S/S BY NASM21065) |
| NAS1781:1976 | NUT, SELF-LOCKING, PLATE, ONE LUG, LOW HEIGHT, 100 DEGREES CSK, 160 KSI, 450 DEGREES F, 800 DEGREES F |
| NAS 1793:2016 | NUT, SELF-LOCKING, PLATE, CORNER, FLOATING, VARIABLE COUNTERBORE, REPLACEABLE NUT ELEMENT, 125 KSI FTU, 450 DEGREES F AND 800 DEGREES F |
| MS21042 Revision M:1995 | NUT, SELF-LOCKING, 450 DEG. F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, NON-CORROSION RESISTANT STEEL (S/S BY NASM21042) |
| MS21048 Revision F:1987 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEG. AND 800 DEG. F. (S/S BY NASM21048) |
| MS90724 Base Document:1963 | Nut, Sheet Spring and U Type |
| MS51470 Base Document:1983 | NUT, PLAIN, HEXAGON (MACHINE SCREW), CARBON STEEL, UNF-2B |
| NAS1792:2015 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, VARIABLE COUNTERBORE, REPLACEABLE NUT ELEMENT, 125 KSI FTU, 450 DEGREES F AND 800 DEGREES F |
| MS14144 Revision C:1994 | NUT, SELF-LOCKING, LIGHTWEIGHT, CASTELLATED, 450 DEG. F (S/S BY NASM14144) |
| MS9364 Revision A:1968 | NUT, SLOTTED, HEXAGON - SHEAR, A-286, SILVER PLATED, MIL-S-8879 (S/S BY SAE-AS9364) |
| MS21083 Revision H:1993 | NUT, SELF-LOCKING, HEXAGON NON-METALLIC INSERT, LOW HEIGHT, 250 DEG. F (S/S BY NASM21083) |
| MS9553 Base Document:1970 | NUT HEX, BOSS CONNECTION, CRES (S/S BY SAE-AS9553) |
| NAS1330:2012 | NUT, BLIND RIVET, COUNTERSUNK HEAD, INTERNAL THREAD, NON-LOCKING (FREE-RUNNING) AND SELF-LOCKING (PREVAILING TORQUE) |
| MIL-N-45938-13 Base Document:1984 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING, KNURLED COLLAR, MINIATURE, FLOATING, 450 DEGREE F AND 600 DEGREE F) (S/S BY NASM45938/13) |
| NAS509:2014 | NUT, JAM, DRILLED AND UNDRILLED |
| MIL-N-45938-14 Base Document:1984 | NUT, PLAIN, CLINCH AND NUT, SELF-LOCKING, CLINCH (SELF-CLINCHING, KNURLED COLLAR, FLOATING, 450 DEG. F 600 DEG. F) (S/S BYNASM45938/14) |
| MS51943 Revision C:1976 | Nut, Self Locking, Hexagon Prevailing Torque, for Critical Installations, 250 DEG. F, UNC-3B and UNF-3B (S/S by MIL-DTL-45913) |
| MS14146 Revision A:1988 | NUT, SELF-LOCKING, CASTELLATED, HEXAGON, C\'BORED, CAPTIVE WASHER, 450 DEG. F |
| MS21082 Revision F:1993 | NUT, SELF-LOCKING, PLATE, ONE LUG, FLOATING, NON-METALLIC INSERT, STEEL, 125 KSI FTU, 250 DEG. F (S/S BY NASM21082) |
| NAS1789:2014 | NUT, SELF-LOCKING, PLATE, SIDE BY SIDE, FLOATING, LOW HEIGHT, REDUCED RIVET SPACING, CBORED, 160 KSI, 450 DEGREES F, 800 DEGREES F |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Are you sure?
Logging out.