MIL-STD-1520 Revision C:1986
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
CORRECTIVE ACTION AND DISPOSITION SYSTEM FOR NONCONFORMING MATERIAL
02-27-1995
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
1.1 Purpose
1.2 Application
1.3 Change notice and revisions
2 Referenced documents (not applicable)
3 Definitions
3.1 Control charts
3.2 Control limits
3.3 Corrective action
3.4 Corrective Action Board (CAB)
3.5 Material Review Board (MRB)
3.6 Nonconformance
3.6.1 Minor nonconformance
3.6.2 Major/critical nonconformance
3.7 Nonconforming material
3.8 Occurrence
3.9 Recurrence
3.10 Preliminary Review (PR)
3.11 Quality Improvement Project (QIP)
3.12 Repair
3.13 Rework
3.14 Scrap
3.15 Standard Repair Procedure (SRP)
3.16 Statistical Process Control (SPC)
3.17 Supplier
3.18 Use-as-is
3.19 Definitions of acronyms used in this standard
4 General requirements
4.1 Corrective action and disposition system
4.2 Statistical Process Control (SPC)
4.2.1 Control limit standards
4.3 Quality improvement
4.4 Contractor's written procedures
4.5 Material Review Board (MRB)
4.5.1 MRB authority and responsibilities
4.6 Corrective Action Board (CAB)
4.6.1 CAB authority and responsibilities
4.7 Government rights
5 Detailed requirements
5.1 Identification and segregation of nonconforming
material
5.2 PR disposition
5.3 MRB disposition
5.4 Use-as-is dispositions
5.5 Repair dispositions
5.6 Scrapped material
5.7 Nonconforming material documentation
5.7.1 Additional documentation for MRB items
5.7.2 Additional documentation for corrective action
5.7.3 Recurring nonconformances
5.7.4 Nonconformance costs
5.8 Minimum data summarization requirements
5.9 Control of material review and disposition system
at suppliers
5.9.1 Corrective action at supplier facilities
5.9.2 Records of nonconforming material received from
suppliers
5.10 Audits
6 Notes
6.1 Intended use
6.2 Changes from previous issue
Describes a cost effective corrective action and disposition system for non conforming material, which results in productivity and quality improvement. Coverage includes definitions, control limit standards, quality improvement, corrective action board (CAB), contractor's written procedures, material review board (MRB), and corrective action and disposition system.
| Committee |
AREA QCIC
|
| DocumentType |
Standard
|
| Pages |
31
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Withdrawn
|
| MIL H 38534 : B (1) | HYBRID MICROCIRCUITS, GENERAL SPECIFICATION FOR |
| MIL-I-29589 Base Document:1991 | INTERROGATOR SET, AN/UPX-24(V) |
| SAE AS7107A | National Aerospace and Defense Contractors Accreditation Program Inspection System Requirements |
| MIL-STD-973 Base Document:1992 | CONFIGURATION MANAGEMENT |
| MIL-STD-481 Revision B:1988 | CONFIGURATION CONTROL, ENGINEERING CHANGES, DEVIATIONS AND WAIVERS (SHORT FORM) |
| MIL-P-83927 Revision B:1981 | Power Supplies, Guided Missile Launchers, Single Types PP-2401B/A PP-2401C/A PP-2401D/A, PP-4285/A, PP-4286/A, and Composite Type PP-4506/A and PS-1037 |
| MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
| SAE AS7106/2B | National Aerospace and Defense Contractors Accreditation Program Requirements for Corrective Action and Disposition System for Nonconforming Material |
| MIL-F-70823 Revision A:1994 | FUZE, ELECTRONIC TIME, M762 LOADING, ASSEMBLING, PACKING AND FUZE, ELECTRONIC TIME, M767 LESS BOOSTER |
| MIL-V-2961 Revision D:1990 | VALVES, GLOBE, PRESSURE REDUCING, GAS SERVICE |
| MIL-HDBK-61 Revision A:2001 | CONFIGURATION MANAGEMENT GUIDANCE |
| MIL A 87221 : 0 | AIRCRAFT STRUCTURES, GENERAL SPECIFICATION FOR REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA; ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| MIL R 28750 : C SUPP 1 | RELAYS, SOLID STATE, SEALED, OPTICALLY ISOLATED, ZERO VOLTAGE TURN ON, 25 AMPERES, 250 VOLTS MAXIMUM, 45-440 HZ, POWER SWITCHING |
| MIL-V-2042 Revision E:1990 | VALVE, REDUCING, WATER SERVICE, FOR NAVAL SHIPBOARD USE |
| MIL W 006729 : B (1) | WATERTIGHTNESS OF AIRCRAFT, TESTING |
| MIL-E-24759 Base Document:1991 | Educator Assembly, In-Line, 90 Gallons per Minute, Portable Aqueous Film-Forming Foam (AFFF) Liquid Concentrate |
| MIL-STD-980 Base Document:1982 | FOREIGN OBJECT DAMAGE (FOD) PREVENTION IN AEROSPACE PRODUCTS |
| MIL-F-71021 Base Document:1991 | FUZE PROXIMITY, ARTILLERY: M732A2 (UNBOOSTERED) |
| SAE AS7106A | National Aerospace and Defense Contractors Accreditation Program (Nadcap) Quality Program Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.