
MIL-S-8660 Revision C:1983
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by

SILICONE COMPOUND, NATO CODE NUMBER S-736 (S/S BY SAE-AS8660)
09-22-1983
07-01-1999
Covers non-melting, heat stable silicone compound for use in high tension electrical connections, ignition systems and electronics equipment for unpainted mating threaded or non-threaded surfaces and a lubricant for components fabricated from rubber.
DocumentType |
Standard
|
Pages |
21
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
SAE AMS3087H | Similar to |
MIL-E-16400 Revision H:1987 | Electronic, Interior Communication and Navigation Equipment, Naval Ship and Shore: General Specification for (S/S by MIL-STD-2036) |
MIL C 24231 : D | CONNECTOR, PLUGS, RECEPTACLES, ADAPTORS, HULL INSERTS AND HULL INSERT PLUGS, PRESSURE-PROOF, GENERAL SPECIFICATION FOR |
MIL-STD-1330 Revision D:1996 | Precision Cleaning and Testing of Shipboard Oxygen, Helium, Helium-Oxygen, Nitrogen, and Hydrogen Systems |
MIL-HDBK-267 Revision A:1987 | Guide for Selection of Lubricants and Hydraulic Fluids for usein Shipboard Equipment |
MIL-H-21367 Revision E:1985 | Hull Fittings, Connectors, Adapter, End Seals, and Stuffing Tubes for Flexible, Solid-Dielectric, Radio-Frequency Cables |
MIL S 15743 : C | SWITCH, ROTARY, ENCLOSED |
MIL H 11996 : B | HANDSET H-60/PT, HANDSET H-156/U, AND HANDSET H-165/U |
MIL-DTL-24560 Revision A:1999 | Lights and Glassware for Navigation, Signal, and Warning, Naval Shipboard Use, General Specification for |
MIL I 13504 : E NOTICE 1 | IGNITER, BOMB, WP, AN-M23A1 (W/O Fuze) |
ASTM D 5212 : 2003 | Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004) |
MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE: 3,000, 10,000 AND 20,000 GALLON, PETROLEUM, LOW TEMPERATURE (NO S/S DOCUMENT) |
MIL-R-85111 Revision A:1980 | Recovery Assist, Securing and Traversing Systemfor Lamps MK III Helicopter |
MIL-DTL-24800 Base Document:1996 | Cleaning Compound - Aqueous - Oxygen Systems Components |
MIL-DTL-62533 Revision A:1995 | Carrier, Cargo, Tracked, 22-Ton, Ammunition Medium: M992/A1/A2; Processing for Storage and Shipment of (No S/S Document) |
MIL-C-13962 Revision B:1966 | Crushing, Screening, and Washing Plant, Diesel-Engine and Electric-Motor Driven, 225-Tons Per Hour (No S/S Document) |
MIL S 8516 : F | SEALING COMPOUND, POLYSULFIDE RUBBER, ELECTRIC CONNECTORS AND ELECTRICAL SYSTEMS CHEMICALLY CURED |
MIL-P-24423 Base Document:1970 | Propulsion and Auxiliary Control Consoles and Associated Control and Instrumentation Equipment, Naval Shipboard Use, Basic Design Requirements |
MIL-C-24217 Revision A:1984 | Connectors, Electrical, Deep Submergence, Submarine |
MIL-T-52983 Revision G:1994 | Tanks, Fabric, Collapsible: 3,000, 10,000, 20,000, AND 50,000 Gallon, Fuel |
MIL R 11767 : F | RELAY ASSEMBLY, GUN & FIRING, WATERPROOF, 24 VOLT DIRECT CURRENT |
MIL-I-983 Revision E:1966 | Interior Communication Equipment, Naval Shipboard; Basic Design Requirements for (S/S by MIL-STD-2036) |
MIL-B-53102 Base Document:1990 | Berm Liner Assemblies, Arctic Service (No S/S Document) |
MIL-I-82877 Base Document:1992 | Ignition Element, PVU-15/B |
MIL-F-48863 Revision C:1985 | Fuze, Guided Missile, M934E6 Parts Assembly, Loading and Packing for |
MIL C 19836 : B | COOLER, FLUID, INDUSTRIAL, AIR MOTOR AND GENERATOR, NAVAL SHIPBOARD |
MIL-C-13522 Revision C:1966 | CRUSHER, JAW, ROCK, AIRBORNE, 15-TPH CAPACITY |
MIL L 24560 : 0 | LIGHTS AND GLASSWARE FOR NAVIGATION, SIGNAL AND WARNING, NAVAL SHIPBOARD USE, GENERAL SPECIFICATION FOR |
MIL-PRF-8516 Revision G:1997 | Sealing Compound, Synthetic Rubber, Electric Connectors and Electric Systems, Chemically Cured |
DOD-P-15817 Revision D:1976 | PARTS, SYNTHETIC RUBBER, FOR USE WITH BATTERIES OR IN BATTERY COMPARTMENTS OF SUBMARINES (METRIC) (NO S/S DOCUMENT) |
DOD V 24657 : 0 | VALVE, ACTUATOR, DIRECT COUPLED, GEAR DRIVEN ELECTRICALLY POWERED FOR NAVAL SHIPBOARD PROPULSION AND AUXILIARY SYSTEMS (METRIC) |
MIL-A-24319 Revision B:1981 | Antenna, Whip, 10.67 Meter (35 F EET), AS-2537 ( )/SR (No S/S Document) |
MIL-V-24619 Base Document:1983 | Valve, Quick Closing,for Saturated Steam Service (No S/S Document) |
DOD-E-24618 Base Document:1983 | ELECTRODES, SILVER-SILVER CHLORIDE, REFERENCE TYPE PORTABLE CELLS AND REPLACEMENT ELEMENTS (METRIC) (NO S/S DOCUMENT) |
MIL I 23145 : B | INFLATION ASSEMBLIES, LIFE PRESERVER |
MIL-C-24368 Revision B:1987 | Connector Assemblies; Plugs and Receptacles, Electric Power Transfer, Shore to Ship and Ship to Ship, General Specification for |
MIL-C-22249 Revision B:1989 | Connector Sets, Electrical, Hermetically Sealed, Submarine General Specification for |
MIL-S-85318 Base Document:1979 | SEALING COMPOUND, NON-CARCINOGEN CURING POLYURETHANE (POLYETHER BASED), ELECTRIC CONNECTORS AND ELECTRIC SYSTEMS |
O-G-491 Revision D:1992 | Glycerol, Technical (High Gravity) (Refer to ACS Pub \"Reagent Chemicals) |
MIL-I-24092 Revision D:1993 | Insulating Varnishes and Solventless Resins for Application by the Dip Process |
ASTM D 495 : 2014 | Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation |
FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
O-A-548 Revision D:1974 | Antifreeze/Coolant, Engine: Ethylene Glycol, Inhibited, Concentrated (S/S by A-A-870) |
MIL C 3702 : B | CABLE, POWER, ELECTRICAL, IGNITION, HIGH TENSION |
QQ-Z-301 Revision C:1964 | ZINC SHEET AND STRIP (S/S BY ASTM-B69) |
MIL-STD-290 Revision H:2013 | Packaging and Marking of Petroleum and Related Products |
MIL-E-463 Revision B:1962 | Ethyl Alcohol (for Ordinance use) (S/S by A-A-59342) |
QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEG. C) (S/S BY J-STD-004, J-STD-005 AND J-STD-006) |
ASTM D 217 : 2017 : REDLINE | TEST METHODS FOR CONE PENETRATION OF LUBRICATING GREASE |
QQ-B-613 Revision D:1973 | Brass, Leaded and Nonleaded :Flat Products (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B36 and ASTM-B121) |
MIL-R-3065 Revision E:1984 | RUBBER, FABRICATED PRODUCTS (S/S BY ASTM-D2000) |
MIL-E-480 Revision A:1969 | Enamel, Baking, Phenol- or Ure-Formaldehyde (use TT-E-529) |
ASTM D 257 : 2014 : REDLINE | Standard Test Methods for DC Resistance or Conductance of Insulating Materials |
TT-I-735 Revision A:1963 | Isopropyl Alcohol |
QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
MIL-I-631 Revision D:1961 | Insulation, Electrical, Synthetic - Resin Composition, Nonrigid |
MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
MIL-M-14 Revision H:1990 | Molding Compounds, Thermosetting (S/S by ASTM-D5948) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.