
MIL-R-81294 Revision D:1990
Current
The latest, up-to-date edition.

Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems
12-31-1990
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PACKAGING
6. NOTES
Covers requirements for four types and two classes of paint remover.
DevelopmentNote |
D NOTICE 1 - Inactive for new design. (01/2000)
|
DocumentType |
Standard
|
Pages |
31
|
ProductNote |
NEW CHILD NOT 2 2019 IS NOW ADDED
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Current
|
Supersedes |
This specification covers the requirements for four types and two classes of paint remover for epoxy, polysulfide, and polyurethane paint systems.
Standards | Relationship |
SAE AMS 1375 : 2012 | Similar to |
MIL C 53072 : B | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
TT-P-2760 Revision A:1994 | Primer Coating: Polyurethane, Elastomeric, High-Solids |
SAE AIR 5479 : 2017 | ENVIRONMENTALLY COMPLIANT PROCESSES FOR LANDING GEAR |
MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
MIL C 85322 : B | COATING ELASTOMERIC, POLYURETHANE, RAIN EROSION RESISTANT, FOR EXTERIOR AIRCRAFT USE |
MIL P 85582 : B | PRIMER COATINGS: EPOXY, WATERBORNE |
MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
MIL C 87104 : 0 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
MIL F 18264 : D | FINISHES: ORGANIC, WEAPONS SYSTEM, APPLICATION AND CONTROL OF |
MIL-PRF-23377 Revision K:2012 | Primer Coatings: Epoxy, High-Solids |
TT-P-2756 Revision A:1996 | Polyurethane Coating: Self-Priming Topcoat, Low Volatile Organic Compounds (VOC) Content (No S/S Document) |
SAE ARP81490A | Transmission Lines, Transverse Electromagnetic Mode |
MIL-PRF-85285 Revision E:2012 | Topcoat, Aircraft and Support Equipment |
MIL-C-81907 Base Document:1972 | Coating System, Polyurethane, Aliphatic, Weather Resistant: Process for Application of (No S/S Document) |
SAE AMST23397 | Tapes, Pressure Sensitive Adhesive, for Masking During Paint Stripping Operations |
MIL-W-87105 Base Document:1977 | WAVEGUIDE ASSEMBLIES, GENERAL SPECIFICATION FOR |
MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
MIL-PRF-85582 Revision E:2012 | PRIMER COATINGS: EPOXY, WATERBORNE |
MIL-T-81490 Revision A:1991 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
MIL-T-23397 Revision B:1970 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS (S/S BY SAE-AMS-T-23397) |
MIL F 14072 : D | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
FED-STD-313 Revision D:1996 | Material Safety Data, Transportation Data, and Disposal Data for Hazardous Materials Furnished to Government Activities |
PPP-C-96 Revision E:1992 | Cans, Metal, 28 Gage and Lighter |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
MIL-A-9962 Revision A:1966 | Abrasive Mats, Non-Woven, Non-Metallic (S/S by A-A-58054) |
MIL-M-3171 Revision C:1966 | Magnesium Alloy, Processes for Pretreatment and Prevention of Corrosion on (S/S by SAE-AMS-M-3171) |
MIL-H-6875 Revision H:1989 | Heat Treatment of Steel, Process for (S/S by SAE-AMS-H-6875) |
NAS517:2014 | SCREW, SHEAR, 100 DEGREE FLUSH HEAD, ALLOY STEEL, CROSS RECESS, CLOSE TOLERANCE, 95 KSI FSU |
MIL-S-8802 Revision F:1990 | SEALING COMPOUND, TEMPERATURE-RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, HIGH-ADHESION (S/S BY SAE-AMS-S-8802) |
MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE (S/S BY SAE-AMS-T-9046) |
CCC-C-440 Revision E:1976 | Cloth, Cheesecloth, Cotton, Bleached and Unbleached |
MIL C 85570 : B (1) | CLEANING COMPOUND, AIRCRAFT, EXTERIOR |
MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
PPP-D-729 Revision E:1977 | Drums, Shipping and Storage, Steel, 55-Gallon (208 Liters) |
MIL S 81733 : C | SEALING AND COATING COMPOUND CORROSION INHIBITIVE |
QQ-M-44 Revision B:1964 | Magnesium Alloy Plate and Sheet ( AZ31B) (S/S byAMS4375, AMS4377 and AMS4376) |
MIL-S-5000 Revision E:1982 | STEEL, CHROME-NICKEL-MOLYBDENUM (4340) BARS, AND FORGING STOCK (S/S BY SAE-AMS-S-5000) |
P-C-444 Revision B:1983 | Cleaning Compound, Solvent Soluble, Grease Emulsifying |
QQ-A-250-5 Revision F:1971 | Aluminum Alloy Alclad 2024, Plate and Sheet (See Notice 5 for Replacement Information) |
QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
MIL-C-43616 Revision C:1981 | Cleaning Compounds, Aircraft Surface (S/S by A-A-59921) |
MIL-T-23397 Revision B:1970 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS (S/S BY SAE-AMS-T-23397) |
FED-STD-141 Revision D:2001 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing |
MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
MIL-C-83286 Revision B:1973 | Coating, Urethane, Aliphatic Isocyanate, for Aerospace Applications (S/S by MIL-C-85285 S/S by MIL-PRF-85285) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.