MIL-PRF-49465 Revision C:2007
Current
The latest, up-to-date edition.
Resistor, Fixed, Metal Element, Power Type, Very Low Resistance Values, General Specification for
10-15-2007
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - PROCEDURE FOR QUALIFICATION APPROVAL
Specifies the general requirements for power type, low value (1 ohm and below), fixed resistors (2 terminal and 4 terminal) for use in electrical, electronic, communications, and associated equipment.
| DocumentType |
Standard
|
| Pages |
72
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the general requirements for power type, low value (1 ohm and below), fixed resistors (2 terminal and 4 terminal) for use in electrical, electronic, communications, and associated equipment. Included are precision resistors of ±1 percent, ±3 percent, and ±5 percent initial resistance tolerances with power ratings ranging from 3 watts to 5 watts at +25OC derated to 0 power at +275OC.
| MIL-DTL-39032 Revision E:2000 | Resistors, Packaging of |
| MIL-PRF-49465-6 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Style RLV30 |
| MIL-HDBK-199 Revision D:2018 | Resistors, Selection and Use of |
| MIL-PRF-49465-1 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Style RLV10 |
| MIL-PRF-49465-7 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Style RLV31 |
| DSCC 07011 : D | RESISTOR, FIXED, CURRENT SENSING, METAL STRIP, HIGH PRECISION, SURFACE MOUNT, STYLE 2512 |
| DSCC 07012 : D | RESISTOR, FIXED, CURRENT SENSING, METAL STRIP, HIGH PRECISION, SURFACE MOUNT, STYLE 3637 |
| MIL-STD-202-211 Base Document:2015 | Method 211, Terminal Strength |
| MIL-STD-202-302 Base Document:2015 | Method 302, Insulation Resistance |
| MIL-STD-202-304 Base Document:2015 | Method 304, Resistance-Temperature Characteristic |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-STD-202-303 Base Document:2015 | Method 303, DC Resistance |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| MIL-STD-202-215 Base Document:2015 | Method 215, Resistance to Solvents |
| MIL-PRF-49465-7 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Style RLV31 |
| MIL-PRF-49465-6 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Style RLV30 |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-108 Base Document:2015 | Method 108, Life (at Elevated Ambient Temperature) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
| MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
| MIL-PRF-49465-1 Revision C:2007 | Resistor, Fixed, Metal Element, Power Type, Style RLV10 |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Logging out.