MIL-PRF-46167 Revision D:2005
Current
Current
The latest, up-to-date edition.
Lubricating Oil, Internal Combustion Engine, Arctic
Available format(s)
PDF
Published date
01-27-2005
Publisher
US$20.00
Excluding Tax where applicable
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes the one grade of internal combustion compression-ignition engine lubricating oil with military symbol OEA-30 and NATO Code O-183, suitable for arctic use.
| DevelopmentNote |
Supersedes MIL L 46167 (B). (02/2005) D NOTICE 1 - Notice of Validation. (03/2010) D NOTICE 2 - Notice of Validation. (03/2016)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
This performance specification covers one grade of internal combustion compression-ignition engine lubricating oil with military symbol OEA-30 suitable for arctic use (see 6.1 and 6.6).
| MIL-DTL-53133 Revision C:2002 | Generator Sets, Skid Mounted, Tactical, Quiet, Diesel Engine Driven, Alternating Current 5 through 60 Kilowatts, General Specification for |
| MIL-DTL-32496 Base Document:2014 | Generator Sets, Skid Mounted, Trailer Mounted Advanced Medium-Sized Mobile Power Sources, Tactical Diesel Fuel Driven, Alternating Current 5 through 60 Kilowatts General Specification for |
| MIL-PRF-26139 Revision E:2015 | Tester, Pressurized Cabin Leakage, Aircraft, (AF/M24T-3 and AF/M32T-1) |
| MIL-PRF-21260 Revision E:1998 | Lubricating Oil, Internal Combustion Engine, Preservative Break-in |
| MIL-STD-3004 Revision D:2014 | Quality Assurance/Surveillance for Fuels, Lubricants and Related Products (S/S by MIL-STD-3004-1 and MIL-STD-3004-2) |
| MIL-PRF-53051 Revision C:2017 | Pumping Assemblies, Wheel-Mounted, Diesel Engine Driven, Bulk Transfer, Fuel and Potable Water Pumping Service |
| MIL-DTL-62186 Revision C:2009 | Generator, Alternating Current (650 Ampere Rectified), 28 Volts Direct Current (Oil Cooled) |
| A-A-59918 Revision B:2014 | Self Propelled Concrete Saw (SPCS) |
| SAE J304_201606 | Engine Oil Tests |
| MIL-PRF-62122 Revision E:2011 | Cable, Assembly, Inter-Vehicle Power: Plug, Receptacle, and Adapter |
| MIL-DTL-62461 Revision E:1998 | Transmission Assembly |
| MIL-STD-633 Revision G:2013 | Standard Family of Mobile Electric Power Generating Sources General Description Information and Characteristic Data |
| MIL-DTL-46796 Revision D:2010 | Engine, Diesel: 8 Cylinder, V-Type 390 to 440 H.P. |
| MIL-PRF-32470 Base Document:2013 | Truck, Forklift, 10,000 Lb Capacity, Variable Reach, Rough Terrain |
| SAE AIR786B | Elastomer Compatibility Considerations Relative to Elastomeric Sealant Selection |
| ASTM D 892 : 2013-07 | TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
| ASTM D 5800 : 2015-04 | TEST METHOD FOR EVAPORATION LOSS OF LUBRICATING OILS BY THE NOACK METHOD |
| ASTM D 4951 : 2014 : REDLINE | Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 6922 : 2013-05 | TEST METHOD FOR DETERMINATION OF HOMOGENEITY AND MISCIBILITY IN AUTOMOTIVE ENGINE OILS |
| ASTM D 808 : 2016 : REDLINE | Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) |
| ASTM D 6984 : 2017-05 | TEST METHOD FOR EVALUATION OF AUTOMOTIVE ENGINE OILS IN THE SEQUENCE IIIF, SPARK-IGNITION ENGINE |
| MIL-PRF-2104 Revision K:2016 | Lubricating Oil, Internal Combustion Engine, Combat/Tactical Service |
| ASTM D 2896 : 2015 : REDLINE | Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration |
| ASTM D 524 : 2015 : REDLINE | Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products |
| ASTM D 5967 : 2017 : REDLINE | Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine |
| ASTM D 5481 : 2013 : REDLINE | Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer |
| MIL-PRF-21260 Revision E:1998 | Lubricating Oil, Internal Combustion Engine, Preservative Break-in |
| ASTM D 5968 : 2017 : REDLINE | TEST METHOD FOR EVALUATION OF CORROSIVENESS OF DIESEL ENGINE OIL AT 121 DEGREES C |
| ASTM D 4628 : 2016 : REDLINE | Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry |
| ASTM D 4485 : 2017-03 | SPECIFICATION FOR PERFORMANCE OF ACTIVE API SERVICE CATEGORY ENGINE OILS |
| ASTM D 6618 : 2016 : REDLINE | Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine |
| ASTM D 4683 : 2017 : REDLINE | Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C |
| ASTM D 6894 : 2013 : REDLINE | Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine |
| FED-STD-791 Revision D:2007 | Testing Method of Lubricants, Liquid Fuels, and Related Products |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| STANAG 1135 : 2017 | INTERCHANGEABILITY OF FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS USED BY THE ARMED FORCES OF THE NORTH ATLANTIC TREATY NATIONS |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : All end users must be registered with an Account prior to user licenses being assigned.Are you sure?
Logging out.