MIL-HDBK-775 Base Document:1996
Current
The latest, up-to-date edition.
FOAM-IN-PLACE PACKAGING, PROCEDURES FOR
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
1.1 Purpose
1.2 Application
1.3 Classification
2. APPLICABLE DOCUMENTS
2.1 Government documents
2.1.1 Specifications, standards and handbooks
2.1.2 Other Government publications
3. DEFINITIONS (Not Applicable)
4. GENERAL REQUIREMENTS
4.1 Materials
4.1.1 Foam chemicals
4.1.2 Toxic and hazardous materials
4.1.3 Use of recycled polyurethane
4.2 Sensitive items
4.3 Safety and health considerations (occupational and environmental)
4.3.1 Purging dispensing head
4.3.2 Pyrolysis
4.3.3 Combustibility
4.3.4 Personal protective measures
4.3.5 First aid
4.3.6 Vapor detection
4.3.7 Decontamination
4.3.8 Waste management
4.4 Unit protection
4.5 Foam dispensing equipment
4.6 Foam conditions
4.7 Predetermination of foam thickness
4.8 Determinations of foam volume (quantities)
4.9 Utilization of restraining devices
5 DETAILED REQUIREMENTS
5.1 General
5.1.1 Technique I, split pack, standard
5.1.2 technique II, split pack, alternate
5.1.3 Technique III, split pack, inverted
5.1.4 Technique IV, foam-in-bag
5.1.5 Technique V, special technique, modified
5.1.6 Technique VI, foamed container
5.1.7 Technique VII, encapsulated pack
5.1.8 Technique VIII, preformed molding
5.2 Performance characteristics
5.2.1 Exterior appearance
5.2.2 Rough handling damage
5.2.3 shock mitigation (flexible foams)
5.2.4 Pack opening
5.2.5 Completeness of fill
5.2.6 Foam adherence
5.2.7 Release of items
5.2.8 Item condition
5.2.9 Conditioning of pack
5.3 Reusability
5.4 Marking for shipment and storage
5.5 Foam workmanship
6 NOTES
6.1 Intended use
6.2 Ordering data
6.3 Sampling for Group B inspection
6.4 Opening and reusability information for technique VII packs
6.5 Foam-in-place training
6.6 Subject term (keyword) listing
6.7 Changes from previous document
FIGURES
APPENDICES
A. Quality assurance provisions
B. English-metric conversions
TABLES
Provides the requirements and procedures (techniques) for packaging supplies using foam-in-place (FIP) materials.
| Committee |
AREA PACK
|
| DevelopmentNote |
Supersedes MIL STD 1191 (09/2004)
|
| DocumentType |
Standard
|
| Pages |
61
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| MIL-STD-107 Revision J:2001 | PREPARATION AND HANDLING OF INDUSTRIAL PLANT EQUIPMENT FOR SHIPMENT AND STORAGE |
| PPP-T-97 Revision D:1970 | TAPE, PRESSURE SENSITIVE ADHESIVE, FILAMENT REINFORCED |
| MIL-B-117G:1993 | BAG, SLEEVE AND TUBING |
| ASTM D 3950 : 2017 : REDLINE | Standard Specification for Strapping, Nonmetallic (and Joining Methods) |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM D 3953 : 2015 : REDLINE | Standard Specification for Strapping, Flat Steel and Seals |
| MIL B 81705 : C | BARRIER MATERIALS, FLEXIBLE, ELECTROSTATIC FREE HEAT SEALABLE |
| PPP-F-320 Revision D:1970 | FIBERBOARD, CORRUGATED AND SOLID SHEET STOCK (CONTAINER GRADE), AND CUT SHAPES |
| CFR 40(PTS260-265) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| MIL F 83671 : A | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
| PPP-C-1797 Revision A:1982 | CUSHIONING MATERIAL, RESILIENT, LOW DENSITY, UNICELLULAR POLYPROPYLENE FOAM |
| MIL B 121 : F | BARRIER MATERIAL, GREASEPROOFED, WATERPROOFED, FLEXIBLE |
| PPP-T-60 Revision E:1986 | TAPE, PACKAGING, WATERPROOF |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
| FF-N-105 Revision B:1971 | NAIL, BRADS, STAPLES AND SPIKES, WIRE, CUT AND WROUGHT |
| UU-P-268 Revision G:1973 | PAPER, KRAFT, WRAPPING |
| NN-P-530 Revision E:1977 | PLYWOOD, FLAT PANEL |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.