• Shopping Cart
    There are no items in your cart

MIL H 46170 : B

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE

Available format(s)

PDF

Superseded date

01-19-2001

US$20.00
Excluding Tax where applicable

Specifies two types of synthetic hydrocarbon base hydraulic fluids. Type I is undyed, identified by Military symbol FRH and NATO code No. H-544 Type II dyed red for aerospace use.

Committee
FSC 9150
DevelopmentNote
B Interim Amendment 3 Notice 1 - cancels Interim Amendment 3 ONLY.
DocumentType
Standard
Pages
23
PublisherName
US Military Specs/Standards/Handbooks
Status
Superseded
SupersededBy

MIL PRF 62420 : A PERISCOPE, TANK
MIL H 87257 : 0 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT & MISSILE
MIL-V-29592 Base Document:1993 VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR
MIL V 81940 : B VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS
MIL-T-45309 Revision E:1983 TANK, COMBAT, FULL TRACKED, 105 MM GUN, M60, M60A1, M601A (RISE) & M60A3 PROCESSING FOR SHIPMENT & STORAGE OF
MIL DTL 46746 : E CARRIERS, COMMAND POST, LIGHT TRACKED: M577,M577A1,M577A2 AND M577A3: AND CARRIERS, COMMAND POST SYSTEM, STANDARDIZED INTEGRATED: M1068 AND M1068A;PROCESSING FOR STORAGE AND SHIPMENT OF
MIL P 62420 : 0 PERISCOPE, TANK
MIL M 62338 : A MULTIPLE LAUNCH ROCKET SYSTEM (MLRS) XM993, PROCESSING FOR STORAGE AND SHIPMENT OF
ASTM D 5306 : 1992 : R2002 : EDT 1 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
MIL F 83798 : B FITTING, RUBBER HOSE, LIGHTWEIGHT MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-STD-726 Revision H:1985 PACKAGING REQUIREMENTS CODE
MIL-H-5440 Revision H:1993 HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR
MIL-DTL-62220 Revision C:1996 RECOVERY VEHICLE, FULL-TRACKED, HEAVY, M88A2, PREPARATION FOR STORAGE AND SHIPMENT OF
MIL G 0043914 : E GOGGLES, SUN, WIND AND DUST: 1974
MIL P 45307 : B PUMP, HYDRAULIC, AXIAL PISTONS, MANUAL, WITH FIRE-CONTROL SWITCH
MIL C 49055 : B CABLE, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR
SAE MA4510 Fittings, Weld, Fluid Connection, 35 000 kPa, Metric
ASTM D 5306 : 1992 : R2018 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
MIL-DTL-62420 Revision B:1998 PERISCOPE, TANK
MIL-HDBK-772 Base Document:1981 MILITARY PACKAGING ENGINEERING
MIL L 46147 : B LUBRICANT, SOLID FILM, AIR CURED (CORROSION INHIBITING)
MIL S 71079 : 0 SOLENOID VALVE, 3-WAY: 12561784
MIL L 0046010 : D LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
MIL-S-62544 Base Document:1988 SUPPRESSION FIRE, BROMOTRIFLUOROMETHANE, HALON 1301 SYSTEMS
MIL S 62546 : A SENSOR, FIRE, OPTICAL
MIL-PRF-62198 Revision A:1995 VALVE, SELECTOR, HYDRAULIC DUMP
ASTM D 5306 : 1992 : R2007 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
MIL F 62265 : A FILTER ELEMENT AND RELIEF VALVE, FLUID PRESSURE, HYDRAULIC (M-60 TANK SERIES)
MIL-F-18280 Revision F:1995 FITTING, FLARELESS TUBE, FLUID CONNECTION
MIL-S-62300 Base Document:1983 SWITCH, PRESSURE
MIL-L-52325 Revision D:1988 LAUNCHER, TRANSPORTER, BRIDGE M48A5 OR M60A1 TANK CHASSIS
MIL-P-19692 Revision E:1994 PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR
BWB TL 4330-0020 : 1ED 1996 FILTER ELEMENT
MIL L 46010 : D LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING
MIL-DTL-62327 Revision B:1985 CARRIERS, ARMORED, FULL TRACKED, M901A1, AND M901A3 TOW VEHICLE (LESS TOW WEAPON) AND M981, AND M981A3 FISTV; PROCESSING FOR STORAGE AND SHIPMENT OF (METRIC)
MIL-B-52088 Revision F:1992 BRIDGE, ARMOURED VEHICLE LAUNCHED, SCISSORING TYPE, CLASS 60, ALUMINUM, 60 FOOT SPAN
MIL PRF 62265 : B FILTER ELEMENT AND RELIEF VALVE, FLUID PRESSURE, HYDRAULIC (M-60 TANK SERIES)
SAE AS4510 Fittings, Weld, Fluid Connection, 5000 psi
ASTM D 5306 : 1992 : R1997 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
MIL A 5503 : E ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR
MIL H 85800 : 0 HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR
MIL-F-62668 Base Document:1989 FIGHTING VEHICLE, INFANTRY M2, M2A1, M2A2, & FIGHTING VEHICLE, CAVALRY M3, M3A1, M3A2 - PROCESSING FOR STORAGE & SHIPMENT
MIL-PRF-62495 Revision B:1997 POWER UNIT, HYDRAULIC
MIL F 81836 : A SUPP 1 FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE
MIL-C-52464 Revision C:1992 CYLINDER ASSEMBLIES, ACTUATING, LINEAR: HYDRAULIC FOR BRIDGE AND BRIDGE LAUNCHER
SAE AS4444 Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi
MIL-R-5049 Revision D:1989 RING, WIPER, PISTON ROD
MIL-S-71076 Base Document:1993 SERVOVALVE ASSEMBLY, AZIMUTH: 12561758
MIL-DTL-62265 Revision C:1998 FILTER ELEMENT AND RELIEF VALVE, FLUID PRESSURE, HYDRAULIC (M-60 TANK SERIES)
ASTM D 5306 : 1992 : R2013 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

FED-STD-313 Revision D:1996 MATERIAL SAFETY DATA, TRANSPORTATION DATA AND DISPOSAL DATA FOR HAZARDOUS MATERIALS FURNISHED TO GOVERNMENT ACTIVITIES
PPP-C-96 Revision E:1992 CAN, METAL, 28 GAGE AND LIGHTER
ASTM E 1 : 2014 : REDLINE Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM D 892 : 2013-07 TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS
MIL-STD-290 Revision H:2013 PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS
MIL H 83282 : C HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537
MIL H 6083 : E HYDRAULIC FLUID, PETROLEUM BASE, FOR PRESERVATION AND OPERATION
ASTM D 972 : 2016 : REDLINE Standard Test Method for Evaporation Loss of Lubricating Greases and Oils
MIL H 27601 : B HYDRAULIC FLUID, FIRE RESISTANT, HYDROGENATED POLYALPHAOLEFIN BASE, HIGH TEMPERATURE, FLIGHT VEHICLE, METRIC
MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
FED-STD-791 Revision D:2007 TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS
ASTM E 659 : 2015 : REDLINE Standard Test Method for Autoignition Temperature of Chemicals
MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
ASTM D 1744 : 2013 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.