MIL-DTL-5624 Revision W:2016
Current
Current
The latest, up-to-date edition.
TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - METHOD FOR DETERMINATION OF
FILTRATION TIME AND TOTAL SOLIDS
(PARTICULATE)
Specifies two grades of aviation turbine fuel NATO F-40 (JP-4) and NATO F-44 (JP-5).
| Committee |
FSC 9130
|
| DevelopmentNote |
Supersedes MIL PRF 5624 (S). (10/2000)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-PRF-81380 Revision F:2015 | FILTER/MONITOR, CONTAMINATION, HELICOPTER IN-FLIGHT REFUELING SYSTEM |
| MIL-PRF-32517 Base Document:2015 | SPLICE, CONDUCTOR, ELECTRICAL, COAXIAL CABLE, MATCHED IMPEDANCE, GENERAL SPECIFICATION FOR |
| SAE AIR 744 : 2015 | AEROSPACE AUXILIARY POWER SOURCES |
| MIL-DTL-83054 Revision C:2003 | BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
| SAE AS 5356 : 2017 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR |
| MIL-DTL-27422 Revision F:2014 | TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT |
| SAE AS 85560 : 2013 | BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR |
| MIL-PRF-8805-48 Revision H:2004 | SWITCHES, SENSITIVE, LIMIT, ROLLER LEVER, SELF-RETURN, RESILIANT SEAL, FLUID RESISTANT |
| MIL-PRF-32584 Base Document:2017 | Deck Covering Materials, Monolithic |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| MIL-PRF-24667 Revision C:2008 | COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
| MIL-DTL-85052 Revision B:2005 | CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| MIL-PRF-83383 Revision F:2017 | Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
| MIL-PRF-23653 Revision D:2009 | Plastic Tiles, Vibration Damping |
| MIL-STD-1518 Revision E:2014 | STORAGE, HANDLING, AND SERVICING OF AVIATION FUELS, LUBRICATING OILS, AND HYDRAULIC FLUIDS AT CONTRACTOR FACILITIES |
| MIL-PRF-25439 Revision C:2013 | TRANSMITTER RATE OF FLOW, IN-FLIGHT REFUELING, 0-10,000 PPM, TYPE MB-3 |
| MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
| MIL-PRF-32577 Base Document:2017 | Coating System, Nonskid, Metallic Thermal Spray Application |
| MIL-DTL-9395-31 Revision E:2006 | SWITCHES, PRESSURE, (GAGE), TYPE 2, 5 AMPERES |
| MIL-DTL-5815 Revision H:2012 | ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR |
| MIL-PRF-32177 Revision A:2012 | CLEANING COMPOUND, NONSKID |
| MIL-DTL-25038 Revision J:2012 | WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL |
| MIL-PRF-32098 Revision A:2004 | ULTRAFILTRATION SYSTEM, 10-GALLON PER MINUTE OILY WASTE MEMBRANE (OWMS-10) |
| MIL-DTL-9395-6 Revision C:2006 | SWITCHES, PRESSURE (ABSOLUTE), TYPE 1, SPDT, 3 AMPERES |
| SAE AS 85485 : 2017 | CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
| SAE AS 83519 : 2015 | SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
| SAE AS 23190 : 2015 | WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| ASTM D 7171 : 2016 : REDLINE | Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy |
| SAE AS 81714 : 2014 | TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
| ASTM D 4529 : 2017 : REDLINE | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| MIL-DTL-83797 Revision C:2008 | HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| MIL-DTL-83731 Revision E:2016 | SWITCHES, TOGGLE, UNSEALED AND SEALED, GENERAL SPECIFICATION FOR |
| MIL-DTL-24640 Revision C:2011 | CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
| A-A-59498 Base Document:1999 | TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, DS SAFETY RATED, FOR SHIPBOARD USE |
| MIL-DTL-24643 Revision C:2009 | Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
| MIL-DTL-5578 Revision D:2008 | TANKS, FUEL, AIRCRAFT, SELF-SEALING |
| MIL-DTL-87104 Revision C:2014 | COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
| MIL-PRF-7061 Revision E:2014 | HOSE, ELASTOMERIC, AIRCRAFT, SELF-SEALING, AROMATIC FUEL |
| A-A-59492 Base Document:1999 | TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, 120 INCH LIFT HEIGHT, DS SAFETY RATED, PNEUMATIC RUBBER TIRES, ROUGH TERRAIN, FOR SHIPBOARD USE |
| MIL-DTL-22263 Revision C:2009 | Coupling Fuel Line, Flexible, 125 PSI General Specification for |
| MIL-DTL-32496 Base Document:2014 | GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
| MIL-PRF-8805-49 Revision J:2012 | Switches, Sensitive, Limit, Rotary Linkage Lever (Nonself-Return), Resilient Seal, Fluid Resistant |
| MIL-DTL-24299 Revision B:2017 | HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
| MIL-PRF-62678 Revision B:2010 | PUMP, FUEL, ELECTRICAL: 12 AND 24 VOLT DIRECT CURRENT (METRIC) |
| P-W-2891 Revision A:2002 | WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
| MIL-DTL-25708 Revision F:2008 | ANTENNAS, BLADE, L-BAND, GENERAL SPECIFICATION FOR |
| MIL-PRF-32490 Base Document:2014 | Additive, Lubricity Improver, Distillate Fuel |
| MIL-PRF-32020 Revision B:2011 | PROVER, LIQUID VOLUMETRIC POSITIVE DISPLACEMENT METER |
| SAE ARP 5369 : 2016 | GUIDELINES FOR WIRE IDENTIFICATION MARKING USING THE HOT STAMP PROCESS |
| SAE AS 81934 : 2016 | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
| SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| MIL-DTL-25516 Revision F:2004 | CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
| MIL-PRF-32097 Revision A:2005 | Filtration Module, Oily Waste Membrane Type |
| MIL-DTL-8777 Revision F:2011 | WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C |
| MIL-DTL-81381 Revision C:2005 | WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
| MIL-DTL-38195 Revision D:2000 | Generator Set, Gas Turbine Engine, 60 KW 400 Hertz, General Purpose |
| MIL-DTL-3702 Revision F:2012 | CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
| MIL-DTL-83528 Revision H:2018 | Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for |
| SAE AIR5691A : 2017 | GUIDANCE FOR THE DESIGN AND INSTALLATION OF FUEL QUANTITY INDICATING SYSTEMS |
| MIL-DTL-9395-39 Revision D:2010 | SWITCHES, PRESSURE, (GAUGE) TYPE 2, LOW LEVEL TO 5 AMPERES |
| MIL-PRF-38299 Revision E:2011 | FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT |
| MIL-PRF-32278 Revision B:2008 | GAUGE, TACTICAL AUTOMATED TANK (TATG) - FUELS OPERATIONAL READINESS CAPABILITY EQUIPMENT (FORCE) |
| MIL-DTL-81248 Revision C:2006 | DETECTOR PAD, FREE WATER |
| MIL-DTL-83526 Revision D:2014 | CONNECTORS, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR |
| MIL-PRF-81352 Revision C:2005 | COATINGS, AIRCRAFT TOUCH-UP |
| SAE ARP 81490 : 2016 | TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| SAE AS 620 : 2012 | HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
| SAE AS 5958 : 2017 | FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
| ASTM D 3343 : 2016 : REDLINE | Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
| SAE AS 1701 : 2017 | LUBRICANT, SOLID FILM |
| ASTM D 1405/D1405M : 2008 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| MIL-PRF-8805-39 Revision J:2014 | SWITCHES, SENSITIVE, LIMIT, PLUNGER, 7 AMPERES, RESILIENT SEAL, FLUID RESISTANT |
| MIL-DTL-85061 Revision C:2009 | COUPLING, FUEL LINE, FLEXIBLE, 125 PSI |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| SAE AS 82819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
| MIL-PRF-8805-43 Revision K:2014 | SWITCHES, SENSITIVE, PLUNGER, RESILIENT SEAL, FLUID RESISTANT |
| MIL-PRF-81975 Revision C:2008 | COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
| MIL-DTL-83723-27 Revision C:2015 | CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| SAE AS 5258 : 2012 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
| MIL-PRF-32058 Revision B:2017 | CHOCK, WHEEL-TRACK - AVIATION, ADJUSTABLE ROPE TYPE |
| MIL-DTL-49292 Revision B:2006 | Cable Assemblies, Nonpressure Proof, Fiber Optic, Metric, General Specification for |
| MIL-PRF-23236 Revision D:2009 | Coating Systems for Ship Structures |
| MIL-DTL-7899 Revision D:2014 | Valve, Check, Aircraft Fuel System |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| FAA AC 20-24 : 2014 | APPROVAL OF PROPULSION FUELS, ADDITIVES, AND LUBRICATING OILS |
| MIL-PRF-26139 Revision E:2015 | TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1) |
| MIL-STD-3004 Revision D:2014 | QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
| MIL-PRF-85285 Revision E:2012 | COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
| MIL-PRF-32090 Revision A:2016 | DELIVERY SYSTEM, AERIAL, BULK FUEL |
| MIL-PRF-53051 Revision C:2017 | PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE |
| MIL-S-8805-85 Revision E:2005 | SWITCH, SENSITIVE, ROTARY (NON-SELF RETURN), 4 AMPERES, RESILIENT SEAL |
| SAE AS 1356 : 2012 | LIFE RAFTS |
| MIL-DTL-9395-27 Revision G:2006 | SWITCHES, PRESSURE, GAUGE (TYPE 2), 3 AMPERES |
| JSSG-2001 Revision B:2004 | Air Vehicle |
| MS21346 Revision F:2005 | Switch, Toggle, Positive Break, Lever Lock and Toggle, Miniature, Toggle Sealed, Integrated Wire Terminals, Single Pole, .469 Mounting Bushing |
| MIL-PRF-62430 Revision B:2010 | HARNESS ASSEMBLY, THERMOCOUPLE |
| SAE AS 81819 : 2010 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
| SAE AIR 7484 : 2018 | GUIDANCE ON THE IMPACT OF FUEL PROPERTIES ON FUEL SYSTEM DESIGN AND OPERATION |
| SAE AS 2078 : 2015 | TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
| SAE ARP 1827C : 2014 | MEASURING AIRCRAFT GAS TURBINE ENGINE FINE FUEL FILTER ELEMENT PERFORMANCE |
| SAE AS 81824 : 2016 | SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
| EI 1550 : 2014 | HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
| MIL-PRF-8805-40 Revision K:2014 | SWITCHES, SENSITIVE, PLUNGER, RESILIENT SEAL, FLUID RESISTANT |
| MIL-PRF-57267 Base Document:2017 | COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
| MIL-DTL-9395-26 Revision D:2006 | SWITCHES, PRESSURE, ABSOLUTE (TYPE 1), 3 AMPERES |
| MIL-DTL-25707 Revision G:2015 | ANTENNA, FLUSH MOUNT, L-BAND, GENERAL SPECIFICATION FOR |
| MIL PRF 16884 : K | FUEL, NAVAL DISTILLATE |
| MS21347 Revision K:2005 | Switch, Toggle, Positive Break, Miniature, Toggle Sealed, and --Lever Lock-- Miniature, Toggle Sealed, Integrated Wire Terminals, Double Pole, .469 Mounting Bushing |
| EI 1581 : 2016 | SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
| ASTM D 7224 : 2014-12 | TEST METHOD FOR DETERMINING WATER SEPARATION CHARACTERISTICS OF KEROSINE-TYPE AVIATION TURBINE FUELS CONTAINING ADDITIVES BY PORTABLE SEPAROMETER |
| MIL-PRF-32148 Base Document:2005 | FILTER SEPARATOR ELEMENTS, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD |
| MIL-DTL-9395-8 Revision E:2006 | SWITCHES, PRESSURE, (GAGE), TYPE 2, SPDT, 10 AMPERES |
| MIL-DTL-22612 Revision D:2015 | DETECTOR, COMBINED CONTAMINATED FUEL |
| SAE AS 60491 : 2015 | SLEEVE, PROTECTION, FOR CABLE AND HARNESS PROTECTION |
| MIL-PRF-38715 Revision B:1996 | INDICATOR, COMBUSTIBLE GAS AND OXYGEN |
| MIL-DTL-6615 Revision G:2008 | Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for |
| MIL-PRF-87260 Revision B:2006 | Foam Material, Explosion Suppression, Inherently Electrostatically Conductive, for Aircraft Fuel Tanks |
| A-A-59918 Revision B:2014 | SELF PROPELLED CONCRETE SAW (SPCS) |
| MIL-DTL-49055 Revision G:2017 | CABLES, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR |
| SAE MAP 749 : 2015 | AIRCRAFT TURBINE ENGINE FUEL SYSTEM COMPONENT ENDURANCE TEST PROCEDURE (ROOM TEMPERATURE CONTAMINATED FUEL) |
| MIL-PRF-8805-80 Revision G:2009 | SWITCH, SENSITIVE, LIMIT, HERMETIC SEAL |
| MIL-PRF-83323 Revision D:2016 | TESTER, UNIVERSAL RECEPTACLE, AERIAL REFUELING |
| MIL-DTL-9395-29 Revision C:2006 | SWITCHES, PRESSURE, (DIFFERENTIAL) (TYPE 3), 4 AMPERES |
| MIL-PRF-62625 Revision B:2009 | VALVE, FUEL-DRAIN |
| MIL-DTL-26500 Revision G:2011 | CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
| MIL-DTL-83733 Revision E:2006 | CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
| MIL-PRF-25017 Revision H:2011 | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
| MIL-PRF-370 Revision K:2017 | HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| SAE AS 5729 : 2016 | O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
| MIL-DTL-62548 Revision C:2010 | LEAD, IGNITION |
| MIL-PRF-52109 Revision H:2010 | PUMPING ASSEMBLIES, PORTABLE, BULK TRANSFER FUEL AND WATER PUMPING SERVICE |
| MIL-PRF-53064 Revision C:2017 | HOSE ASSEMBLY, ELASTOMER: LIGHTWEIGHT, COLLAPSIBLE; LIQUID FUEL |
| MIL-DTL-24788 Revision B:2017 | Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch |
| MIL-PRF-83779 Revision C:2013 | WATER INDICATING PASTE |
| MIL-PRF-32233 Revision B:2015 | TANKS, COLLAPSIBLE, 3,000, 10,000, 20,000, 50,000, & 210,000 U.S. GALLONS, FUEL |
| SAE AIR 4170 : 2016 | RETICULATED POLYURETHANE FOAM EXPLOSION SUPPRESSION MATERIAL FOR FUEL SYSTEMS AND DRY BAYS |
| SAE AS 81914 : 2016 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| SAE AS 22759 : 2014 | WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
| SAE AS 5877 : 2016 | DETAILED SPECIFICATION FOR AIRCRAFT PRESSURE REFUELING NOZZLE |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| SAE AIR 786 : 2014 | ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION |
| SAE ARP 901 : 2017 | BUBBLE-POINT TEST METHOD |
| BS EN 3716-001:2006 | Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data Technical specification |
| EN 3716-001:2006 | Aerospace series - Connector, single-way, with triaxial interface, for transmission of digital data - Part 001: Technical specification |
| MIL-F-26301 Revision H:2014 | FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR |
| MIL-DTL-9129 Revision G:2014 | Discharges, Electrostatic General Specification for |
| IP 355 : 2014 | PETROLEUM PRODUCTS - ESTIMATION OF NET SPECIFIC ENERGY OF AVIATION TURBINE FUELS USING HYDROGEN CONTENT DATA |
| EI 1535 : 2016 | MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
| MIL-PRF-81904 Revision C:2011 | COATING COMPOUND, THERMAL-INSULATION |
| BS ISO 8829-1:2009 | Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies Metallic (stainless steel) braid |
| MIL-HDBK-844 Revision B:2014 | AIRCRAFT REFUELING HANDBOOK FOR NAVY/MARINE CORPS AIRCRAFT |
| ISO 8829-1:2009 | Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 1: Metallic (stainless steel) braid |
| MIL-STD-3013 Revision A:2008 | GLOSSARY OF DEFINITIONS, GROUND RULES, AND MISSION PROFILES TO DEFINE AIR VEHICLE PERFORMANCE CAPABILITY |
| MIL-PRF-83041 Revision C:2000 | FILTER-SEPARATOR, LIQUID FUEL SKID MOUNTED, 600 GALLONS PER MINUTE |
| SAE AS 506 : 2004 | HIGH TEMPERATURE INSULATED TERMINALS & SPLICES |
| MIL-DTL-26521 Revision L:2014 | Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
| MIL-DTL-9395-32 Revision D:2006 | SWITCHES, PRESSURE, DIFFERENTIAL (TYPE 3), 4 AMPERES |
| MIL-DTL-9395-38 Revision C:2006 | SWITCHES, PRESSURE, (GAGE) TYPE 2, LOW LEVEL TO 5 AMPERES |
| MIL-PRF-32007 Base Document:2003 | OILY WASTEWATER SEPARATION SYSTEM, 6.7-GALLON PER MINUTE NAVY INTEGRATED MEMBRANE SYSTEM (NIMS) |
| MIL-PRF-32470 Base Document:2013 | TRUCK, FORKLIFT, 10,000 LB CAPACITY, VARIABLE REACH, ROUGH TERRAIN |
| MIL-DTL-83420 Revision P:2017 | WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR |
| MIL-DTL-62421 Revision A:2009 | CONTROL, UNIT, ELECTRONIC, DIGITAL |
| MIL DTL 17 : J | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| MIL-DTL-38159 Revision D:2015 | CONNECTORS, ELECTRIC, RAMP POWER, 416/240 VOLTS |
| SAE AS 5590 : 2013 | CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-PRF-15618 Revision H:2006 | FILTER-SEPARATOR, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD |
| MIL-DTL-52849 Revision E:2008 | TEST KIT - AVIATION FUEL CONTAMINATION (PORTABLE) |
| MIL-PRF-81298 Revision E:2011 | Dye, Liquid for the Detection of Leaks in Aircraft Fuel Systems |
| SAE AS 81511 : 2016 | CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
| SAE AS 83819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
| SAE AS 81703 : 2012 | CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
| SAE AS 6116 : 2016 | ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR |
| SAE AS 8942 : 2014 | BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING |
| SAE AIR 4023 : 2016 | AIRCRAFT TURBINE FUEL CONTAMINATION HISTORY AND ENDURANCE TEST REQUIREMENTS |
| SAE AS 6224 : 2015 | WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
| SAE AS 81820 : 2014 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
| ASTM D 1405/D1405M : 2008 : R2013 | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019) |
| SAE AMS S 83474 : 2016 | SHIMS, MOLDED, FILLED RESIN COMPOUND AND SHEET PREPEG |
| ASTM D 3701 : 2017 : REDLINE | Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry |
| ASTM D 5452 : 2012 : REDLINE | Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration |
| ASTM D 7170 : 2016 : REDLINE | Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method |
| ASTM D 3227 : 2016 : REDLINE | Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) |
| ASTM D 7619 : 2017 : REDLINE | Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter |
| ASTM D 129 : 2013-08 | TEST METHOD FOR SULFUR IN PETROLEUM PRODUCTS (GENERAL HIGH PRESSURE DECOMPOSITION DEVICE METHOD) |
| ASTM D 4306 : 2015 : REDLINE | Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination |
| MIL-STD-290 Revision H:2013 | PACKAGING AND MARKING OF PETROLEUM AND RELATED PRODUCTS |
| ASTM D 7154 : 2015 : REDLINE | Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method) |
| ASTM D 7224 : 2014-12 | TEST METHOD FOR DETERMINING WATER SEPARATION CHARACTERISTICS OF KEROSINE-TYPE AVIATION TURBINE FUELS CONTAINING ADDITIVES BY PORTABLE SEPAROMETER |
| ASTM D 156 : 2015 : REDLINE | Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method) |
| ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
| MIL-PRF-25017 Revision H:2011 | INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
| ASTM D 2624 : 2015 : REDLINE | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ASTM D 4529 : 2017 : REDLINE | Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
| ASTM D 7345 : 2017 : REDLINE | Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method) |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| ASTM D 2386 : 2015 | Standard Test Method for Freezing Point of Aviation Fuels |
| ASTM D 6379 : 2011 : REDLINE | TEST METHOD FOR DETERMINATION OF AROMATIC HYDROCARBON TYPES IN AVIATION FUELS AND PETROLEUM DISTILLATES - HIGH PERFORMANCE LIQUID CHROMATOGRAPHY METHOD WITH REFRACTIVE INDEX DETECTION |
| ASTM D 7171 : 2016 : REDLINE | Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy |
| QPL 25017 : 20171027 | QUALIFIED PRODUCT LIST OF PRODUCTS QUALIFIED UNDER PERFORMANCE SPECIFICATION - MIL-PRF-25017 - INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
| ASTM D 1322 : 2015-06 | TEST METHOD FOR SMOKE POINT OF KEROSINE AND AVIATION TURBINE FUEL |
| ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
| ASTM D 2622 : 2016 : REDLINE | Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry |
| ASTM D 5191 : 2015-10 | TEST METHOD FOR VAPOR PRESSURE OF PETROLEUM PRODUCTS (MINI METHOD) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.