MIL-DTL-45204 Revision D:2007
Current
Current
The latest, up-to-date edition.
Gold Plating, Electrodeposited
Available format(s)
PDF
Published date
06-29-2007
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Specifies electrodeposited gold plating on metallic surfaces.
| DevelopmentNote |
Supersedes MIL G 45204 (C). (08/2007) D NOTICE 1 - Notice of Validation. (12/2013)
|
| DocumentType |
Standard
|
| Pages |
17
|
| ProductNote |
NEW CHILD NOT 2 2018 IS NOW ADDED
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers electrodeposited gold plating on metallic surfaces (see 6.1).
| DSCC 89051 : E | CONTACT, ELECTRICAL, CONNECTOR, HIGH POWER, SOCKET, SIZE 8, STRAIGHT, SOLDER |
| MIL-DTL-28754-61 Revision A:2016 | Connectors, Electrical, Modular, Type IV, Connector, 100 Pin, Center, Crossover, Contact Tails on .100 Centers (Ceramic Compatible) |
| DSCC 89061 : E | CONTACT, ELECTRICAL, CONNECTOR, COAXIAL, SOCKET, SIZE 8, RIGHT ANGLE, CRIMP REMOVABLE |
| MIL-DTL-55302-163 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Plug, 72, 84, 96, and 120 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| MIL-DTL-55302-5 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-23971 Revision E:2017 | POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR |
| DSCC 89049 : D | CONTACT, ELECTRICAL, CONNECTOR, POWER, SOCKET, SIZE 8, RIGHT ANGLE, SOLDER |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-DTL-32546 Base Document:2016 | Connectors, Electrical, Circular, for High-Speed Data Bus Transmission, Copper Conductor, General Specification for |
| MIL-DTL-55302-2 Revision F:2008 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Printed Wiring Boards (.150 Spacing) |
| MIL-DTL-21097-16 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, CRIMP, REMOVABLE, TYPE CR |
| DSCC 89050 : D | CONTACT, ELECTRICAL, CONNECTOR, HIGH POWER, PIN, SIZE 8, STRAIGHT, SOLDER |
| MIL-DTL-24308-30 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| DSCC 89056 : D | CONTACT, ELECTRICAL, CONNECTOR, HIGH VOLTAGE, SOCKET, SIZE 8, RIGHT ANGLE, SOLDER |
| SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-PRF-31031 Revision C:2014 | CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MIL-DTL-5757-10 Revision M:2016 | RELAYS, ELECTROMAGNETIC, HERMETICALLY SEALED, DPDT, LOW LEVEL TO 2 AMPERES |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL-DTL-28754-62 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .050 CENTERS |
| MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
| MIL-DTL-28748 Revision D:2001 | CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
| MIL DTL 28754/60 : A | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS |
| MIL-DTL-28754-59 Revision A:2016 | CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE) |
| MIL-DTL-55302-179 Revision C:2007 | Connectors, Printed Circuit Subassembly and Accessories: 4 Row, Pin Assemblies, 100 through 684 Contact Positions, for Printed Wiring Boards(.100 Spacing) |
| MIL-DTL-3933 Revision L:2014 | Attenuators, Fixed, Space Level, Non-Space Level General Specification for |
| DSCC 87075 : F | RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, DOUBLE TAB, HIGH POWER 10 WATTS |
| DSCC 89048 : D | CONTACT, ELECTRICAL, CONNECTOR, POWER, PIN, SIZE 8, RIGHT ANGLE, SOLDER |
| MIL-DTL-28754-35 Revision F:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, MALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL-DTL-55302-159 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
| MIL-DTL-55302-8 Revision F:2006 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-1 Revision E:2008 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.150 SPACING) |
| MIL-DTL-55302-174 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: 2 Row, Receptacle Assemblies, Right Angle, 20 through 150 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| MIL-DTL-55302-55 Revision G:2004 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-178 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: 3 Row, Pin Assemblies, Right Angle, 75 through 405 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-181 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: 4 Row, Pin Assemblies, Right Angle, 100 through 684 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-175 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: 2 Row, Pin Assemblies, Right Angle, 20 through 150 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| DSCC 89055 : D | CONTACT, ELECTRICAL, CONNECTOR, HIGH VOLTAGE, SOCKET, SIZE 8, STRAIGHT, SOLDER |
| MIL-PRF-31031-43 Base Document:2008 | Connector, Electrical, Receptacle, Radio Frequency, High Reliability, Coaxial, Series BMZ, Right Angle, Pin Contact, for Semirigid Cable |
| MIL-DTL-28837 Revision D:2015 | MIXER STAGES, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-132 Revision C:2015 | CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: SOCKET CONTACTS, STRAIGHT THRU, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| MIL-DTL-55302-21 Revision F:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACT, RIGHT-ANGLE, 92 COMPOSITE CONTACT, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-6 Revision J:2005 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Socket Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-24308-31 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 2, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-28754 Revision E:2016 | Connectors, Electrical, Modular, and Component Parts General Specification for |
| DSCC 89060 : E | CONTACT, ELECTRICAL, CONNECTOR, COAXIAL, PIN, SIZE 8, RIGHT ANGLE, CRIMP REMOVABLE |
| DSCC 89059 : E | CONTACT, ELECTRICAL, CONNECTOR, COAXIAL, SOCKET, SIZE 8, STRAIGHT, CRIMP REMOVABLE |
| SAE AS 85028 : 2017 | CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-7 Revision E:2006 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-STD-1130 Revision C:2012 | Connections, Electrical, Solderless Wrapped |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| MIL-DTL-55302-122 Revision B:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 184 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.050 INCH SPACING) |
| MIL-DTL-55302-177 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: 3 Row, Receptacle Assemblies, Right Angle, 75 through 405 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-180 Revision C:2008 | Connectors, Printed Circuit Subassembly and Accessories: 4 Row, Receptacle Assemblies, Right Angle, 100 through 684 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-162 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC |
| MIL-DTL-28754-37 Revision E:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND POLARIZING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL-DTL-55302-96 Revision F:2008 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, WRAPPOST (REMOVABLE) HERMAPHRODITIC CONTACTS (.100 INCH SPACING) |
| MIL-DTL-55302-160 Revision D:2004 | Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 72, 84, 96, and 120 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric |
| MIL-PRF-22885-115 Base Document:2012 | SWITCHES, PUSHBUTTON, ULTRA-COMPACT, LED ILLUMINATION, NVIS, SEALED |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-4 Revision F:2008 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-55302-56 Revision H:2004 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing) |
| MIL-DTL-55302-192 Revision A:2006 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 122 AND 152 POSITIONS, PRINTED WIRING BOARD (.075 SPACING) |
| MIL-DTL-55302-170 Revision B:2005 | Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Female Brush, Right Angle, Polarized, For Multilayered Printed Wiring Board (.100 Spacing) |
| MIL-DTL-28754-34 Revision E:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL-DTL-24308-39 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-21097-4 Revision G:2008 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CR |
| MIL-DTL-12883-42 Revision F:2004 | Sockets and Accessories for Plug-in Electronic Components (Power Transistor, 2 Contact, 10 Amperes, TO-3), Radial |
| SAE AS 81703 : 2012 | CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
| MIL-DTL-28754-47 Revision C:2015 | CONNECTORS, ELECTRICAL MODULAR, TYPE 4, CONNECTOR, 100 PIN, RIGHT ANGLE CONTACT TAILS ON .100 CENTERS |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| MIL-DTL-55302-131 Revision D:2007 | CONNECTORS, PLUG, ELECTRICAL, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RIGHT ANGLE, PIN CONTACTS, 64 OR 96 CONTACT POSITION FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL R 5757 : K | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-83723 Revision H:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
| MIL-DTL-55074 Revision G:2013 | Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for |
| MIL-DTL-55302-157 Revision B:2005 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT THRU CONTACTS, 64 OR 96 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MIL-DTL-21097-17 Revision E:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD CONTACT, SOLDER, REMOVABLE, TYPE CR |
| MIL-DTL-55302-73 Revision D:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE, ENVIRONMENTAL RESISTANT, PLUG, ELECTRICAL, POLARIZED FOR PRINTED WIRING BOARDS (.150 SPACING) |
| MIL-DTL-24308-35 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-24308-29 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 1, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-21097-5 Revision G:2008 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD MALE ADAPTER, CONTACT SPACING (.200) ALTERNATE DUAL ROW, TYPE CS |
| MIL-DTL-27599 Revision E:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR |
| DSCC 89099 : H | RESISTOR, FIXED, FILM, CHIP, FLANGE MOUNT, SINGLE TAB, HIGH POWER, 10 WATTS |
| MIL-DTL-28754-36 Revision E:2015 | CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND GROUNDING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL |
| MIL-STD-1276 Revision H:2013 | Leads for Electronic Component Parts |
| MIL-DTL-55302-173 Revision C:2007 | Connectors, Printed Circuit Subassembly and Accessories: 2 Row, Pin Assemblies, 20 through 150 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| DSCC 89046 : D | CONTACT, ELECTRICAL, CONNECTOR, POWER, 10 AMPERES, PIN, SIZE 8, STRAIGHT, SOLDER |
| MIL-DTL-55302-19 Revision E:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS RIGHT-ANGLE, 41 COMPOSITE CONTACT, FOR PRINTED WIRING BOARDS (.150 SPACING) |
| DSCC 89058 : F | CONTACT, ELECTRICAL, CONNECTOR, COAXIAL, PIN, SIZE 8, STRAIGHT, CRIMP REMOVABLE |
| MIL-DTL-55302-191 Revision C:2011 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 10 thru 100 Positions, Printed Wiring Board (.075 Spacing) |
| MIL-DTL-21097-3 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, ADAPTER, CONTACT SPACING (.200) INDIVIDUAL CONTACTS, TYPE CS |
| DSCC 89054 : D | CONTACT, ELECTRICAL, CONNECTOR, HIGH VOLTAGE, PIN, SIZE 8, STRAIGHT, SOLDER |
| MIL-DTL-24308-38 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-24308-36 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 4, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-32385 Base Document:2011 | CONNECTOR, RECEPTACLES, PLUGS, ADAPTER, USED ON ELECTROLUMINESCENT, EMBEDDED, AND PRINTED CIRCUIT BOARD LAMP LIGHTING PANELS |
| MIL-DTL-55302-64 Revision H:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-24308-37 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-21097-2 Revision F:2005 | CONNECTORS, ELECTRICAL, PRINTED WIRING BOARD COMPOSITE, RECEPTACLE, CONTACT SPACING (.200) SINGLE ROW, TYPE CR |
| MIL-DTL-55302-176 Revision C:2007 | Connectors, Printed Circuit Subassembly and Accessories: 3 Row, Pin Assemblies, 75 through 405 Contact Positions, for Printed Wiring Boards (.100 Spacing) |
| DSCC 89057 : E | CONTACT, ELECTRICAL, CONNECTOR, HIGH VOLTAGE, PIN, SIZE 8, RIGHT ANGLE, SOLDER |
| MIL-DTL-28748-20 Base Document:2005 | Connectors, Electrical, Rectangular, Rack and Panel, Printed Wiring Board (PWB) Mount, Right Angle, Pin Contacts, Size 22 |
| MIL-DTL-83734 Revision H:2007 | SOCKETS, PLUG-IN ELECTRONIC COMPONENTS, DUAL-IN-LINE (DIPS) AND SINGLE-IN-LINE PACKAGES (SIPS), GENERAL SPECIFICATION FOR |
| MIL-DTL-5757 Revision N:2017 | RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR |
| MIL-DTL-24308-33 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, PIN CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-55302-58 Revision J:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING) |
| MIL-DTL-24308-40 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, PLUG, SOCKET CONTACTS, SHELL SIZE 5, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-55302-171 Revision B:2005 | Connectors, Printed Circuit Subassembly and Accessories: Low Mating Force, Contact Brush |
| SAE AS 81511 : 2016 | CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
| MIL-DTL-24308-34 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 3, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-24308-32 Base Document:2015 | CONNECTORS, ELECTRIC, RECTANGULAR, MINIATURE, COMBINATION INSERT ARRANGEMENT, RECEPTACLE, SOCKET CONTACTS, SHELL SIZE 2, SIZE 20 SIGNAL CONTACTS AND SIZE 8 POWER AND SHIELDED, CLASS G, M, N AND D |
| MIL-DTL-83505 Revision C:2017 | SOCKETS, (LEAD, ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-22 Revision F:2004 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, STRAIGHT-THRU, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING) |
| NASA STD 6012 : 2012 | CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE |
| MIL-DTL-23971-1 Revision C:2017 | POWER DIVIDERS, 4 PORT QUADRATURE, SOLDER TERMINALS |
| DSCC 89047 : D | CONTACT, ELECTRICAL, CONNECTOR, POWER, SOCKET, SIZE 8, STRAIGHT |
| SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| SAE AS 81714 : 2014 | TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
| DSCC 89065 : C | GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR |
| DSCC 10012 : 0 | PRINTED WIRING BOARD, RIGID, MULTILAYERED, GENERAL DRAWING |
| DSCC 11006 : 0 | PRINTED WIRING BOARD, FLEXIBLE RIGID FLEX, GENERAL DRAWING |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ASTM E 384 : 2017 : REDLINE | Standard Test Method for Microindentation Hardness of Materials |
| MIL-STD-1916 Base Document:1996 | DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT |
| ASTM B 567 : 1998 | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.