MIL-DTL-3950 Revision K:2016
Current
Current
The latest, up-to-date edition.
Switches, Toggle, Environmentally Sealed, General Specification for
Available format(s)
PDF
Published date
02-29-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - Procedure for Qualification
Inspection - Mounting and Terminal
Hardware
APPENDIX B - DC INDUCTOR CALIBRATION PROCESS
Describes the requirements for environmentally sealed toggle switches.
| DevelopmentNote |
Supersedes MIL S 3950 (F) (01/2004)
|
| DocumentType |
Standard
|
| Pages |
78
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for environmentally sealed toggle switches.
| MS27785 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-DTL-2726 Revision C:2006 | Receptacle, Receptacle Plugs, Switch and Receptacles, and Outlets (Electrical), General Specification for |
| MIL-DTL-3950-16 Revision A:2008 | SWITCHES, TOGGLE, THREE POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED |
| MS27407 Revision E:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED |
| MS27734 Revision E:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, SOLDER TERMINAL |
| MS27409 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MS27784 Revision D:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MIL-DTL-5423-17 Base Document:2010 | Boot, Dust and Water Seal, Bushing Seal, Type A Style 10 (Panel Seal Only)<br> |
| MIL HDBK 1132 : 0 | SWITCHES, SELECTION AND USE OF |
| MS27724 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MS24659 Revision G:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MIL-DTL-3950-15 Revision A:2008 | SWITCHES, TOGGLE, DOUBLE POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED |
| MS24524 Revision K:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED |
| MS24660 Revision G:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MS27788 Revision D:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS27783 Revision D:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS27737 Revision G:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER-LOCK, SOLDER TERMINAL |
| MS27735 Revision E:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, SOLDER TERMINAL |
| MIL-DTL-3950-17 Revision A:2008 | SWITCHES, TOGGLE, FOUR POLE, 4 AMPERES, LOW LEVEL, ENVIRONMENTALLY SEALED |
| MS27787 Revision D:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS27786 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MS24523 Revision J:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED |
| MS27723 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, INTEGRATED WIRE TERMINALS |
| MS27782 Revision D:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MS24525 Revision K:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED |
| MS24658 Revision G:2011 | SWITCH, TOGGLE, ONE POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MIL-DTL-5423-16 Revision E:2009 | BOOT, DUST AND WATER SEAL, BUSHING SEAL, TYPE A (FOR TOGGLE SWITCH 0.469 DIAMETER) STYLE 10 (PANEL BUSHING SEAL ONLY) |
| MS27408 Revision E:2011 | SWITCH, TOGGLE, TWO POLE, ENVIRONMENTALLY SEALED, LEVER LOCK |
| MS27789 Revision D:2005 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, LEVER LOCK, INTEGRATED WIRE TERMINALS |
| MIL-HDBK-525 Base Document:2013 | ELECTRICAL WIRING INTERCONNECT SYSTEM (EWIS) INTEGRITY PROGRAM |
| MS27406 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED |
| MS27736 Revision E:2011 | SWITCH, TOGGLE, FOUR POLE, ENVIRONMENTALLY SEALED, SOLDER TERMINAL |
| MIL-STD-202-211 Base Document:2015 | METHOD 211, TERMINAL STRENGTH |
| ASTM G 21 : 2015 : REDLINE | Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ANSI/NCSL Z540 3 : 2006(R2013) | REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT |
| MIL-STD-202-210 Base Document:2015 | Method 210, Resistance to Soldering Heat |
| MIL-PRF-87252 Revision D:2015 | COOLANT FLUID, HYDROLYTICALLY STABLE, DIELECTRIC |
| MIL-STD-202-101 Base Document:2015 | Method 101, Salt Atmosphere (Corrosion) |
| MIL-STD-202-311 Base Document:2015 | Method 311, Life, Low Level Switching |
| MIL-PRF-15160-2 Revision J:2014 | Fuses, Instrument, Power, and Telephone (Nonindicating), Style F02 |
| MIL-STD-202-107 Base Document:2015 | Method 107, Thermal Shock |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-STD-202-106 Base Document:2015 | Method 106, Moisture Resistance |
| A-A-59588 Revision B:2012 | Rubber, Silicone |
| MIL-STD-202-301 Base Document:2015 | Method 301, Dielectric Withstanding Voltage |
| IPC J STD 002 : D | SOLDERABILITY TESTS FOR COMPONENT LEADS, TERMINATIONS, LUGS, TERMINALS AND WIRES |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| SAE AS50861A | WIRE, ELECTRIC, POLYVINYL CHLORIDE INSULATED, COPPER OR COPPER ALLOY |
| MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| MIL-STD-202-310 Base Document:2015 | Method 310, Contact-Chatter Monitoring |
| MIL-STD-202-110 Base Document:2015 | Method 110, Sand and Dust |
| MIL-STD-202-105 Base Document:2015 | Method 105, Barometric Pressure (Reduced) |
| MIL-STD-202-208 Base Document:2015 | Method 208, Solderability |
| MIL-STD-202 Revision H:2015 | ELECTRONIC AND ELECTRICAL COMPONENT PARTS |
| MIL-STD-1285 Revision D:2004 | MARKING OF ELECTRICAL AND ELECTRONIC PARTS |
| FED-STD-H28 Revision A:1994 | Screw-Thread Standards for Federal Services |
| MIL-STD-202-204 Base Document:2015 | Method 204, Vibration, High Frequency |
| MIL-STD-202-213 Base Document:2015 | Method 213, Shock (Specified Pulse) |
| MIL-STD-202-307 Base Document:2015 | Method 307, Contact Resistance |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.