
MIL C 28748 : B
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by

CONNECTOR, ELECTRICAL, RECTANGULAR, RACK AND PANEL, SOLDER TYPE AND CRIMP TYPE CONTACTS, GENERAL SPECIFICATION FOR
English
07-07-1998
Describes rectangular, rack and panel, electrical connectors, with non-removable solder type contacts, and removable crimp type contacts, used in electrical and electronic equipments.
DocumentType |
Standard
|
Pages |
31
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
MIL-P-0081653 Revision C:1987 | POWER CONTROLLER, SOLID STATE, GENERAL SPECIFICATION FOR (NO S/S DOCUMENT) |
MIL-STD-242-8 Revision G:1982 | ELECTRONIC EQUIPMENT PARTS SELECTED STANDARDS CONNECTORS AND SOCKETS - PART 8 (NO S/S DOCUMENT) |
MIL-R-2729 Revision D:1992 | Regulator-Exciter Systems, Voltage, A.C. Generator, Naval Shipboard Use |
MIL C 83729 : A | CHOPPER, ELECTROMECHANICAL GENERAL SPECIFICATION FOR |
MIL-STD-1646 Revision B:1983 | Servicing Toolsfor Electric Contactsand Connections, Selectionanduseof (S/S by MIL-HBDK-1646) |
MIL-HDBK-217 Revision F:1991 | Reliability Prediction of Electronic Equipment |
MIL-G-21410 Revision A:1991 | Governing Systems, Speed and Load-Sensing Naval Shipboard Use |
MIL-C-24105 Revision D:1995 | Converters, Synchro Signal (Panel Mounted), General Specification for |
BS 6623-4:1986 | DTE/DCE interface connectors and pin assignments Specification for 34-pin connector |
MIL-HDBK-845 Base Document:1992 | Standard Power Supply Applications Handbook |
MIL-I-81969-18 Revision A:1979 | Installing and Removal Tools, Connector Electrical Contact, Type I, Class 1, Composition C (S/S By SAE-AS81969/18) |
MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
QQ-P-35 Revision C:1988 | Passivation Treatments for Corrosion-Resistant Steel (S/Sby ASTM-A967or SAE-AMS-QQ-P-35) |
MIL-C-39029-35 Revision C:1992 | Contacts, Electrical Connector, Socket, Crimp Removable, (for MIL-C-28748/4 and MIL-C-28748/14 Connectors) (S/S by SAE-AS39029/35) |
MS3197 Revision G:1983 | GAGE PIN FOR SOCKET CONTACT ENGAGEMENT TEST (S/S BY SAE-AS31971) |
MIL C 55330 : B | CONNECTORS, PREPARATION FOR DELIVERY OF |
QQ-B-626 Revision D:1973 | Brass, Leaded and Nonleaded: Rod, Shapes, Forgings, and Flat Products with Finished Edges (Bar and Strip) (S/S by ASTM-B121, ASTM-B36, ASTM-B16, ASTM-B16M, AND ASTM-B124) |
MIL-STD-45662 Revision A:1988 | Calibration Systems Requirements (Refer to ISO-10012-1 and ANSI-Z540-1 or Comparable Standards as Alternatives to MIL-STD-45662) |
ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
MIL-STD-889 Revision C:2016 | Galvanic Compatibility of Electrically Conductive Materials |
MS18196 Revision G:2016 | Jackscrew, Electrical Connector, Male and Female, Fixed |
MS18197 Revision G:2016 | Guide Pin, Electrical Connector Male and Female |
MIL-I-17214 Revision B:1984 | Indicator, Permeability; Low-Mu (Go-No Go) (S/S by ASTM-A342) |
MIL G 45204 : C | GOLD PLATING, ELECTRODEPOSITED |
QQ-S-571 Revision F:1994 | SOLDER, ELECTRONIC (96 TO 485 DEG. C) (S/S BY J-STD-004, J-STD-005 AND J-STD-006) |
QQ-B-613 Revision D:1973 | Brass, Leaded and Nonleaded :Flat Products (Plate, Bar, Sheet, and Strip) (S/S by ASTM-B36 and ASTM-B121) |
QQ-S-766 Revision D:1988 | Steel, Stainlessand Heat Resisting, Alloys, Plate, Sheetand Strip (S/S By ASTM-A240, ASTM-A666,and ASTM-A693) |
MIL-C-39029 Revision D:1988 | Contacts, Electrical Connector, General Specification for (S/S by SAE-AS39029) |
MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
MIL-STD-1344 Revision A:1977 | Test Methods for Electrical Connectors (S/S by EIA364, See Notice 6 for Individual Test Method Replacement) |
ASTM B 194 : 2015 : REDLINE | Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar |
MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF (S/S BY MIL-STD-2073-1) |
MIL-P-81728 Revision A:1973 | PLATING, TIN LEAD (ELECTRODEPOSITED (S/S BY SAE-AMS-P-81728) |
QQ-B-750 Base Document:1961 | Bronze, Phosphor; Bar, Plate, Rod, Sheet, Strip, Flat Wire, and Structural and Special Shaped Sections (S/S by ASTM-B139) |
MIL-M-24519 Revision E:1992 | Molding Plastics, Electrical, Thermoplastic |
MIL-STD-202 Revision H:2015 | Electronic and Electrical Component Parts |
MIL-I-81969-20 Revision A:1979 | Installing and Removal Tools, Connector Electrical Contact, Type II, Class 1, Composition A or B (S/S By SAE-AS81969/20) |
MS18195 Revision C:2012 | Jackscrews, Electrical Connectors Male and Female, Short Turnable |
MIL-STD-1285 Revision D:2004 | Marking of Electrical and Electronic Parts |
QQ-P-416 Revision F:1991 | Plating, Cadmium (Electrodeposited) (S/Sby SAE-AMS-QQ-P-416) |
MIL-STD-105 Revision E:1989 | Sampling Procedures and Tables for Inspection by Attributes (See Notice 3 for Replacement Information) |
MIL-M-14 Revision H:1990 | Molding Compounds, Thermosetting (S/S by ASTM-D5948) |
QQ-N-290 Revision A:1971 | NICKEL PLATING (ELECTRODEPOSITED) (S/S BY SAE-AMS-QQ-N-290) |
MS18194 Revision E:2012 | Jackscrews, Electrical Connectors Male and Female, Long, Turnable |
MIL W 16878 : F | WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR |
ASTM B 122/B122M : 2016 : REDLINE | Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.