KTA 3407 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PIPE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL
12-08-2022
01-12-2013
Grundlagen
1 Anwendungsbereich
2 Begriffe
3 Werkstoffe
4 Auslegung
5 Konstruktion
6 Berechnung
7 Vorprüfung und Herstellung
8 Transport und Lagerung
9 Montage
10 Dokumentation
11 Wiederkehrende Prüfungen
Anhang A: Balgkompensatoren
Anhang B: Anforderungen an Bauteile der EG 2 und an Bauteile
der Anforderungsstufe R 3
Anhang C: Durchführung von Oberflächenprüfungen mittels
Magnetpulver- und Eindringprüfung
Anhang D: Bestimmungen, auf die in dieser Regel verwiesen wird
Diese Regel ist anzuwenden auf Rohrdurchführungen durch den Reaktorsicherheitsbehälter aus Stahl für Kernkraftwerke mit Leichtwasserreaktoren.
DevelopmentNote |
DRAFT 2017 issued in November 2017. (12/2017)
|
DocumentType |
Standard
|
PublisherName |
Kerntechnischer Ausschuss
|
Status |
Superseded
|
SupersededBy |
KTA 3403 : 2015(R2017) | CABLE PENETRATIONS THROUGH THE REACTOR CONTAINMENT VESSEL OF NUCLEAR POWER PLANTS |
DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
ISO 17636-1:2013 | Non-destructive testing of welds — Radiographic testing — Part 1: X- and gamma-ray techniques with film |
AD 2000-MERKBLATT HP5/2:2011 | MANUFACTURE AND TESTING OF JOINTS - PRODUCTION TESTING OF WELDS, TESTING OF THE PARENT METAL AFTER POST-WELD HEAT TREATMENT |
EN ISO 3452-2:2013 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
EN ISO 10893-5:2011 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) |
ISO 10893-5:2011 | Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
KTA 3211.1 : 2015 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS |
KTA 3205.2 : 2015 COR 2016 | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT |
ISO 20482:2013 | Metallic materials — Sheet and strip — Erichsen cupping test |
EN ISO 19232-3:2013 | Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes (ISO 19232-3:2013) |
DIN EN ISO 10893-8:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 8: AUTOMATED ULTRASONIC TESTING OF SEAMLESS AND WELDED STEEL TUBES FOR THE DETECTION OF LAMINAR IMPERFECTIONS |
EN 10228-4:2016 | Non-destructive testing of steel forgings - Part 4: Ultrasonic testing of austenitic and austenitic-ferritic stainless steel forgings |
EN ISO 10893-11:2011 | Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) |
EN ISO 3452-1:2013 | Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013, Corrected version 2014-05-01) |
AD 2000-MERKBLATT HP0:2017 | GENERAL PRINCIPLES OF DESIGN, MANUFACTURE AND ASSOCIATED TESTS |
ISO 10893-9:2011 | Non-destructive testing of steel tubes Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
DIN EN 10228-1:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 1: MAGNETIC PARTICLE INSPECTION |
KTA 3211.3 : 2012 COR 2016 | PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 3: MANUFACTURE |
EN 10228-2:2016 | Non-destructive testing of steel forgings - Part 2: Penetrant testing |
EN 14917:2009+A1:2012 | Metal bellows expansion joints for pressure applications |
ISO 3059:2012 | Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions |
EN ISO 10893-10:2011 | Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-10:2011) |
EN 10164:2004 | Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
EN ISO 3452-3:2013 | Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:2013) |
DIN EN ISO 19232-1:2013-12 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
EN 14610:2004 | Welding and allied processes - Definitions of metal welding processes |
DIN EN ISO 3452-3:2014-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING - PART 3: REFERENCE TEST BLOCKS (ISO 3452-3:2013) |
ISO 10893-8:2011 | Non-destructive testing of steel tubes Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 9934-3:2015 | Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2015) |
ISO 10893-11:2011 | Non-destructive testing of steel tubes Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
DIN EN 10028-7:2016-10 | FLAT PRODUCTS MADE OF STEELS FOR PRESSURE PURPOSES - PART 7: STAINLESS STEELS |
DIN EN ISO 20482:2014-03 | METALLIC MATERIALS - SHEET AND STRIP - ERICHSEN CUPPING TEST (ISO 20482:2013) |
KTA 3401.3 : 1986(R1997) | STEEL CONTAINMENT VESSELS - PART 3: MANUFACTURE |
EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
DIN EN ISO 10893-11:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 11: AUTOMATED ULTRASONIC TESTING OF THE WELD SEAM OF WELDED STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
DIN EN 10228-3:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 3: ULTRASONIC TESTING OF FERRITIC OR MARTENSITIC STEEL FORGINGS |
DIN EN 1779:1999-10 | NON-DESTRUCTIVE TESTING - LEAK TESTING - CRITERIA FOR THE METHOD AND TECHNIQUE SELECTION |
KTA 3201.2 : 2013 | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS |
ISO 9013:2017 | Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
EN ISO 10893-8:2011 | Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) |
ISO 5173:2009 | Destructive tests on welds in metallic materials — Bend tests |
DIN EN ISO 9934-1:2016-07 (Draft) | NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 1: GENERAL PRINCIPLES (ISO 9934-1:2016) |
DIN EN ISO 6892-1:2017-02 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT ROOM TEMPERATURE (ISO 6892-1:2016) |
EN 10228-1:1999 | Non-destructive testing of steel forgings - Part 1: Magnetic particle inspection |
KTA 3404 : 2013 | ISOLATION OF OPERATING SYSTEM PIPES PENETRATING THE CONTAINMENT VESSEL IN THE CASE OF A RELEASE OF RADIOACTIVE SUBSTANCES INTO THE CONTAINMENT VESSEL OF NUCLEAR POWER PLANTS |
EN ISO 20482:2013 | Metallic materials - Sheet and strip - Erichsen cupping test (ISO 20482:2013) |
EN 10028-7:2016 | Flat products made of steels for pressure purposes - Part 7: Stainless steels |
EN ISO 1127:1996 | Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992) |
DIN EN 10217-5:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: SUBMERGED ARC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
DIN EN ISO 10893-10:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 10: AUTOMATED FULL PERIPHERAL ULTRASONIC TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF LONGITUDINAL AND/OR TRANSVERSE IMPERFECTIONS |
DIN EN ISO 1127:1997-03 | STAINLESS STEEL TUBES - DIMENSIONS, TOLERANCES AND CONVENTIONAL MASSES PER UNIT LENGTH |
ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
EN ISO 9934-1:2016 | Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2016) |
DIN EN ISO 4136:2013-02 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
EN ISO 19232-1:2013 | Non-destructive testing - Image quality of radiographs - Part 1: Determination of the image quality value using wire-type image quality indicators (ISO 19232-1:2013) |
EN ISO 10893-4:2011 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
ISO 3452-3:2013 | Non-destructive testing — Penetrant testing — Part 3: Reference test blocks |
EN ISO 10893-6:2011 | Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011) |
DIN EN 10216-2:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
DIN EN ISO 10893-2:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 2: AUTOMATED EDDY CURRENT TESTING OF SEAMLESS AND WELDED (EXCEPT SUBMERGED ARC-WELDED) STEEL TUBES FOR THE DETECTION OF IMPERFECTIONS |
ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
ISO 19232-3:2013 | Non-destructive testing — Image quality of radiographs — Part 3: Image quality classes |
DIN EN 10228-2:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 2: PENETRANT TESTING |
DIN EN 10204:2005-01 | Metallic products - Types of inspection documents; German version EN 10204:2004 |
DIN EN ISO 10893-5:2011-07 | Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011); German version EN ISO 10893-5:2011 |
DIN EN ISO 10893-9:2011-07 | NON-DESTRUCTIVE TESTING OF STEEL TUBES - PART 9: AUTOMATED ULTRASONIC TESTING FOR THE DETECTION OF LAMINAR IMPERFECTIONS IN STRIP/PLATE USED FOR THE MANUFACTURE OF WELDED STEEL TUBES |
DIN EN ISO 3059:2013-03 | NON-DESTRUCTIVE TESTING - PENETRANT TESTING AND MAGNETIC PARTICLE TESTING - VIEWING CONDITIONS (ISO 3059:2012) |
EN 10228-3:2016 | Non-destructive testing of steel forgings - Part 3: Ultrasonic testing of ferritic or martensitic steel forgings |
EN ISO 10893-2:2011 | Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) |
AD 2000-Merkblatt B 13:2012-07 | Single-ply bellows expansion joints |
ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
EN ISO 10893-9:2011 | Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) |
DIN EN 10217-2:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
DIN EN 14917:2012-06 | Metal bellows expansion joints for pressure applications (includes Amendment A1:2012) |
DIN EN ISO 5173:2012-02 | Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009 + Amd. 1:2011) |
DIN EN ISO 3452-2:2014-03 | Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2013) |
ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
KTA 1408.2 : 2015 | QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 2: MANUFACTURE |
DIN EN ISO 9013:2003-07 | THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES (ISO 9013:2017) |
EN 10204:2004 | Metallic products - Types of inspection documents |
DIN EN 10228-4:2016-10 | NON-DESTRUCTIVE TESTING OF STEEL FORGINGS - PART 4: ULTRASONIC TESTING OF AUSTENITIC AND AUSTENITIC-FERRITIC STAINLESS STEEL FORGINGS |
EN 10307:2001 | Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
ISO 9934-2:2015 | Non-destructive testing — Magnetic particle testing — Part 2: Detection media |
DIN EN ISO 10893-4:2011-07 | Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) |
ISO 19232-1:2013 | Non-destructive testing — Image quality of radiographs — Part 1: Determination of the image quality value using wire-type image quality indicators |
ISO 9934-3:2015 | Non-destructive testing — Magnetic particle testing — Part 3: Equipment |
DIN EN ISO 9934-3:2015-12 | NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 3: EQUIPMENT (ISO 9934-3:2015) |
DIN 25410:2012-07 | Nuclear facilities - Surface cleanliness of components |
EN ISO 4136:2012 | Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012) |
DIN EN 10164:2016-04 (Draft) | STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
ISO 10893-6:2011 | Non-destructive testing of steel tubes Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
EN ISO 9934-2:2015 | Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2015) |
EN 10216-1:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties |
KTA 3205.1 : 2002(R2007) | COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 1: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS |
KTA 1408.1 : 2015 COR 2016 | QUALITY ASSURANCE OF WELD FILLER METALS AND WELDING CONSUMABLES FOR PRESSURE AND ACTIVITY-RETAINING SYSTEMS IN NUCLEAR POWER PLANTS - PART 1: QUALIFICATION TESTING |
ISO 10893-2:2011 | Non-destructive testing of steel tubes Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections |
ISO 4136:2012 | Destructive tests on welds in metallic materials Transverse tensile test |
ISO 10893-4:2011 | Non-destructive testing of steel tubes Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections |
EN ISO 17636-1:2013 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
EN ISO 9013:2017 | Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2017) |
DIN EN ISO 17636-1:2013-05 | Non-destructive testing of welds - Radiographic testing - Part 1: X- and gamma-ray techniques with film (ISO 17636-1:2013) |
KTA 3201.3 : 2007(R2012) | COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 3: MANUFACTURE |
EN 10160:1999 | Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
DIN EN 14610:2005-02 | WELDING AND ALLIED PROCESSES - DEFINITIONS OF METAL WELDING PROCESSES |
AD 2000-MERKBLATT HP5/1:2008 | MANUFACTURE AND TESTING OF JOINTS - PRINCIPLES OF WELDING PRACTICE |
ISO 10893-10:2011 | Non-destructive testing of steel tubes Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections |
DIN EN ISO 9934-2:2015-12 | NON-DESTRUCTIVE TESTING - MAGNETIC PARTICLE TESTING - PART 2: DETECTION MEDIA (ISO 9934-2:2015) |
DIN EN ISO 19232-3:2014-02 | NON-DESTRUCTIVE TESTING - IMAGE QUALITY OF RADIOGRAPHS - PART 3: IMAGE QUALITY CLASSES (ISO 19232-3:2013) |
EN ISO 3059:2012 | Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2012) |
ISO 1127:1992 | Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.