JIS P 8110:2006
Current
Current
The latest, up-to-date edition.
Paper And Board - Sampling To Determine Average Quality
Available format(s)
Hardcopy
Language(s)
Japanese
Published date
02-20-2006
Publisher
ForewordIntroduction1 Scope2 Normative reference3 Definitions4 Principle5 Procedure6 Additional requirements7 Sampling report
Specifies a method of obtaining a representative sample from a lot of paper or board for testing to determine whether or not its average quality complies with set specifications including solid and corrugated fibreboard.
| DocumentType |
Standard
|
| Pages |
10
|
| PublisherName |
Japanese Standards Association
|
| Status |
Current
|
| Supersedes |
2006(R2010) [01/10/2010]2006 [20/02/2006]2001 [20/09/2001]96 [01/03/1996]76
| JIS P 0001:1998 | Glossary Of Terms Used In Pulp And Papers Industry |
| JIS P 8150:2023 | Paper and board -- Determination of colour by diffuse reflectance -- Indoor daylight conditions (C/2 degree) |
| JIS P 8141:2004 | Paper and board - Determination of capillary rise - Klemm method |
| JIS B 9518:1992 | Receipt And Journal Paper For Cash Register |
| JIS S 5504:1995 | Notebooks And Exercise Books |
| JIS P 8145:1976 | Testing method for dirt in paper and paperboard |
| JIS P 8112:1994 | Paper and board - Determination of bursting strength by Mullen low-pressure tester |
| JIS P 8135:1998 | Testing Method Of Wet Tensile Breaking Strength Of Paper And Paperboard |
| JIS P 8116:2000 | Paper And Board - Determination Of Tearing Resistance |
| JIS P 4501:1993 | Toilet tissue papers |
| JIS P 8154-3:2008 | Paper And Board - Accelerated Ageing - Part 3: Moist Heat Treatment At 80 Degrees C And 65% Relative Humidity |
| JIS S 3104:1999 | Facial Tissues |
| JIS S 5502:1997 | Envelopes and pockets |
| JIS P 8114:2003 | Paper and board - Determination of folding endurance - Schopper method |
| JIS P 8149:2000 | Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method |
| JIS P 8152:2005 | Paper, Board And Pulps - Measurement Of Diffuse Reflectance Factor |
| JIS P 8133:1998 | Paper, board and pulps - Determination of pH of aqueous extracts |
| JIS P 8142:2005 | Paper And Board - Measurement Of 75 Degree C Specular Gloss - Converging Beam Method |
| JIS P 8113:2006 | Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method |
| JIS S 5509:1993 | Report Papers |
| JIS P 8124:1998 | Paper and board - Determination of grammage |
| JIS P 8251:2003 | Paper, board and pulps - Determination of residue (ash) on ignition at 525 degrees C |
| JIS P 8112:2008 | Paper - Determination of bursting strength |
| JIS P 8118:1998 | Testing Method For Thickness And Bulk Density Of Paper And Paperboard |
| JIS P 8150:2004 | Paper and board - Determination of colour(C/2 degree) - Diffuse reflectance method |
| JIS Z 1516:2003 | Corrugated fiberboards for shipping containers |
| JIS P 8253:2006 | Pulp, Paper And Board - Determination Of Total Chlorine And Organically Bound Chlorine |
| JIS Z 1531-3:2004 | Sacks - Method of sampling empty sacks for testing |
| JIS P 8127:1998 | Testing Method For Moisture In Papers And Paperboards |
| JIS P 8143:1996 | Paper - Determination of stiffness by Clark stiffness tester |
| JIS X 6191:1993 | Unpunched Paper Tape For Information Interchange |
| JIS P 8154-1:2008 | Paper And Board - Accelerated Ageing - Part 1: Dry Heat Treatment At 105 Degrees C |
| JIS P 8140:1998 | Paper and board - Determination of water absorptiveness - Cobb method |
| JIS S 5503:1997 | Writing pads |
| JIS P 8151:2004 | Paper and board - Determination of roughness/smoothness (air leak methods) - Print-surf method |
| JIS P 8125:2000 | Testing Method For Stiffness Of Paperboard By Bending Load |
| JIS P 8117:1998 | Paper and board - Determination of air permeance - Gurley method |
| JIS P 8134:1998 | Board - Determination of puncture resistance |
| JIS S 5508:1993 | Scratchpads And Drafting Papers |
| JIS P 8252:2003 | Paper, board and pulps - Determination of residue (ash) on ignition at 900 degrees C |
| JIS Z 0403-2:1999 | Corrugated fibreboard Part 2: Determination of edgewise crush resistance |
| JIS P 3401:2000 | Kraft Papers |
| JIS P 8115:2001 | Paper and board - Determination of folding endurance - MIT method |
| JIS Z 0221:1976 | Method of water permeability test for packing material |
| JIS P 8128:1995 | Paper and board - Determination of ash |
| JIS P 8131:1995 | Paper and board - Determination of bursting strength by Mullen high-pressure tester |
| JIS P 8119:1998 | Testing Method For Smoothness Of Paper And Paperboard By Bekk Tester |
| JIS P 8129:1998 | Testing Method For Surface Strength Of Paper And Paperboard |
| JIS Z 0218:2002 | Gummed tape - Testing methods for adhesive strength |
| JIS S 3102:1992 | Shojigami |
| JIS P 8153:2006 | Paper And Board - Measurement Of Hygroexpansivity - Part 1: Hygroexpansivity Up To A Maximum Relative Humidity Of 68% |
| JIS P 4505:1999 | Diazo Sensitized Papers |
| JIS P 8122:2004 | Testing method for stockigt sizing degree of paper |
| JIS Z 0403-1:1999 | Corrugated fibreboard Part 1: Determination of flat crush resistance |
| JIS P 8148:2001 | Paper, board and pulps - Measurement of diffuse blue reflectance factor (ISO brightness) |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.