JIS B 7507:1993
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Vernier, dial and digital callipers
Available format(s)
Hardcopy , PDF
Superseded date
01-25-2017
Superseded by
Language(s)
English, Japanese
Published date
02-15-2008
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.This Japanese Industrial Standard specifies vernier callipers of 1000 mm or under in maximum measuring length among those for general use which measure the external dimensions and internal dimensions to 0.1 mm, 0.05 mm, 0.02 mm or 0.01 mm in scale intervals, minimum indicating quantities or minimum reading values.
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
Japanese Standards Association
|
| Status |
Superseded
|
| SupersededBy |
Reaffirmed 2012
| JIS Z 8103:2000 | Glossary of terms used in measurement |
| JIS B 7506:2004 | Gauge blocks |
| JIS A 5541:2008 | Body of turnbuckle for building |
| JIS C 2804:1995 | Compression Terminals |
| JIS A 8422-3:1998 | Earth-moving Machinery - Dumpers - Testing Methods |
| JIS R 1677:2007 | Testing Method For Bending Fatigue Of Porous Fine Ceramics At Room Temperature |
| JIS R 2251-3:2007 | Test Methods For Thermal Conductivity Of Refractory Materials - Part 3: Stationary Heat Flow Method |
| JIS D 8004:1986 | Reflection type smokemeters for automobile diesel engine |
| JIS C 5321:1997 | Methods of test for high frequency inductors and intermediate frequency transformers for electronic equipment |
| JIS K 7077:1991 | Testing method for charpy impact strength of carbon fiber reinforced plastics |
| JIS B 6470:1983 | Die blocks for closed-die hammer forging |
| JIS K 6885:2005 | Unsintered polytetrafluoroethylene tapes for thread sealing |
| JIS C 8512:2000 | Manganese dioxide lithium primary batteries |
| JIS R 1668:2005 | Testing method for fracture toughness of porous fine ceramics |
| JIS A 1717:1995 | Inspection Standard Of Amusements (merry-go-round) |
| JIS K 6873:1975 | Acrylonitrile-butadiene-styrene (ABS) sheets |
| JIS R 2115:1995 | Testing Methods For Permeability To Gases Of Refractory Bricks |
| JIS A 1450:2003 | Test methods - Components for raised access floor |
| JIS C 3801-3:1999 | Part 3: Hollow insulatorsTesting method for insulators -- Part 3: Hollow insulators |
| JIS H 4312:2000 | Polyethylene lead composite pipes for water supply |
| JIS A 5308:2003 | Ready-mixed concrete |
| JIS B 4357:2000 | Rotary Gear Shaving Cutters |
| JIS R 1664:2004 | Testing Method For Bending Strength Of Porous Fine Ceramics |
| JIS K 7195:1993 | Testing method for heat sag of plastics |
| JIS R 3103-2:2001 | Viscosity And Viscometric Fixed Points Of Glass - Part 2: Determination Of Annealing Point And Strain Point By Fiber Elongation |
| JIS B 4134:1994 | Single point diamond dressing tools |
| JIS H 7851:2005 | Testing method for heat resistance under temperature gradient |
| JIS K 6887:1995 | Polytetrafluoroethylene Tapes |
| JIS K 6400-1:2004 | Flexible Cellular Polymeric Materials - Determination Of Physical Properties - Part 1: General Rules |
| JIS K 7106:1995 | Testing method for stiffness of plastics by means of a cantilever beam |
| JIS A 9401:2007 | Recycled plastics medial strip block |
| JIS S 2135:1991 | Quick coupling unit for gas appliances |
| JIS R 2206-2:2007 | Testing methods for cold compressive strength of refractory bricks Part 2: Test with packing |
| JIS E 2002:2001 | Electric traction overhead lines - Fittings - Test methods |
| JIS B 6913:1999 | Process of quenching and tempering of iron and steel<br> |
| JIS B 4107:1998 | Side Milling Cutters With Brazed Hardmetal Tips |
| JIS L 7507:1995 | Cloth Guiders For Dyeing And Finishing |
| JIS K 7131:1994 | Testing method for thermally stimulated current of plastic films |
| JIS R 1647:2002 | Testing Method For Elution By Dipping In Water Of Fine Ceramics |
| JIS B 4140:2006 | Diamond/CBN products - Diamond or CBN electroplated tools |
| JIS B 4803:1998 | Bandsaw blades for woodworking |
| JIS K 6814:2008 | Thermoplastics pipes - Thermal reversion test method |
| JIS TS Z0011:2005 | Densified Refuse Derived Fuel |
| JIS Z 8801-2:2000 | Test sieves Part 2: Test sieves of perforated metal plate |
| JIS K 6777:2007 | Chlorinated poly (vinyl chloride) (PVC-C) pipe fittings for hot and cold water supply |
| JIS K 7079:1991 | Testing methods for in-plane shear properties of carbon fiber reinforced plastics by plus and minus 45 degrees tension method and two pairs of rails method |
| JIS H 7902:2008 | Method For Compressive Test Of Porous Metals |
| JIS K 6776:2007 | Chlorinated poly (vinyl chloride) (PVC-C) pipes for hot and cold water supply |
| JIS H 7405:1993 | Test method for tensile properties of fiber reinforced metals |
| JIS K 6369:2007 | Steel cord conveyor belts |
| JIS E 6006:2001 | Automatic train operating device for railway rolling stock - Test methods |
| JIS A 5402:2002 | Pressed Cement Roof Tiles |
| JIS C 7503:1990 | Lamps for railway |
| JIS R 2207-3:2007 | Test methods for thermal expansion of refractory products -- Part 3: Contact method using rod test piece Part 3: Contact method using rod test piece |
| JIS K 2395:1994 | Water Solubilizer In Fuel System For Automobiles |
| JIS K 6773:1999 | Polyvinylchloride Waterstop |
| JIS A 8506:1994 | Standard Form Of Specifications And Testing Methods Of Vibrating Rollers |
| JIS H 8452:2008 | Testing method for thermal cycle resistance of oxidation resistant metallic coatings |
| JIS K 6895:1995 | Method for determination of dimension of polytetrafluoroethylene parts |
| JIS Z 1714:1997 | Biaxially oriented nylon films for packaging |
| JIS B 4132:1983 | Diamond dies for wire drawing |
| JIS TS K0005:2008 | Plastics - Determination Of Transition Temperatures With Dynamic Mechanical Analysis |
| JIS Z 8801-3:2000 | Test sieves Part 3: Test sieves of electroformed sheets |
| JIS R 1651:2002 | Method For Measurement Of Pyroelectric Coefficient Of Fine Ceramics |
| JIS H 8626:1995 | Electroplated coatings of nickel for engineering purposes and electroformings of nickel |
| JIS K 7062:1992 | Testing method for izod impact strength of glass fiber reinforced plastics |
| JIS R 1601:2008 | Testing method for flexural strength (modulus of rupture) of fine ceramics at room temperature |
| JIS C 7525:2003 | Reflector incandescent lamps |
| JIS B 1071:1985 | Method of verification for size and geometry of threaded fasteners |
| JIS H 7903:2008 | Method For Thermal Conductivity Test Of Porous Metals |
| JIS S 2147:1998 | Portable cookers attached to liquefied petroleum gas cylinder |
| JIS C 2161:1997 | Test methods of coating powders for electrical insulation |
| JIS L 7504:1999 | Squeezing Rollers For Dyeing And Finishing |
| JIS B 6801:2003 | Manual blowpipes for welding, cutting and heating |
| JIS R 1605:1995 | Testing Methods For Elastic Modulus Of High Performance Ceramics At Elevated Temperature |
| JIS R 1607:1995 | Testing Methods For Fracture Toughness Of High Performance Ceramics |
| JIS C 8435:1999 | Boxes And Box Covers Of Plastic Conduits |
| JIS L 5302:1992 | Plastic bobbins for ring spinning frames |
| JIS C 2563:1995 | Measuring Methods For Ferrite Cores For Magnetic Head |
| JIS Z 1715:1997 | Biaxially oriented polyethylene terephthalate (PET) films for packaging |
| JIS C 2520:1999 | Wires and rolled wires for electrical heating |
| JIS R 1624:1995 | Testing method for bending strength of fine ceramic joint |
| JIS R 1661:2004 | Method For Conductivity Measurement Of Ion-conductive Fine Ceramics |
| JIS C 2811:1995 | Terminal blocks for industrial and similar use |
| JIS A 1701:2006 | Inspection Standard Of Amusement Ride |
| JIS C 2532:1999 | Electrical resistance wires, ribbons and sheets for general use |
| JIS B 4138:1998 | Diamond Or Cubic Boron Nitride Segmented Saws |
| JIS R 1612:2002 | Testing Method For Bending Creep Of Fine Ceramics |
| JIS K 7088:1996 | Testing methods for flexural creep of carbon fibre reinforced plastics |
| JIS TR K0005:2001 | Plastics - Determination Of Transition Temperatures With Dynamic Mechanical Analysis |
| JIS K 6775-1:2005 | Polyethylene pipe-fittings for the supply of gaseous fuels Part 1: Heatfusion fittings |
| JIS K 6741:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipes |
| JIS R 1604:2008 | Testing Method For Flexural Strength (modulus Of Rupture) Of Fine Ceramics At Elevated Temperature |
| JIS C 5402:1992 | Method for test of connectors for use in electronic equipment |
| JIS K 6778:2004 | Polybutene (PB) pipes |
| JIS Z 1707:1997 | General rules of plastic films for food packaging |
| JIS K 6745:2008 | Plastics - Unplasticized poly (vinyl chloride) sheets |
| JIS L 6518:1993 | Pattern Cards For Dobbies |
| JIS C 7528:1996 | Traffic signal lamps |
| JIS A 1541-1:2006 | Building Hardware - Locks And Latches - Part 1: Test Methods |
| JIS R 3701:1990 | Lead glass for X-ray protection |
| JIS Z 2280:1993 | Test method for young's modulus of metallic materials at elevated temperature |
| JIS K 6746:2004 | Plastic welding rods |
| JIS B 8238:1994 | Pressure Regulators For Liquefied Petroleum Gas |
| JIS K 6883:2008 | Plastics - Perfluoroalkoxyalkane (pfa) Tubes |
| JIS K 6374:2008 | Light Conveyor Belts - Tolerances On Widths And Lengths Of Cut Light Conveyor Belts |
| JIS K 6742:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply |
| JIS K 6775-2:2005 | Polyethylene pipe-fittings for the supply of gaseous fuels Part 2: Spigot fittings |
| JIS S 6032:2004 | Plastics rulers |
| JIS K 7082:1993 | Testing method for complete reversed plane bending fatigue of carbon fibre reinforced plastics |
| JIS R 1641:2007 | Measurement Method For Dielectric Of Fine Ceramic Plates At Microwave Frequency |
| JIS R 1659:2003 | Testing methods for elastic modulus of porous fine ceramics |
| JIS A 5542:2003 | Bolts of turnbuckle for building |
| JIS C 7551-1:1999 | Safety specifications for incandescent lamps Part 1: Tungsten filament lamps for domestic and similar general lighting purposes |
| JIS R 1646:2002 | Testing Method For Cavitation Erosion Of Fine Ceramics |
| JIS R 1680:2007 | Testing Method For Determining Particle Retention In Liquid For Porous Fine Ceramics |
| JIS Z 8801-1:2006 | Test sieves Part 1: Test sieves of metal wire cloth |
| JIS C 8708:2007 | Sealed nickel-metal hydride rechargeable single cells |
| JIS C 1604:1997 | Resistance thermometer sensors |
| JIS A 1715:1995 | Inspection Standard Of Amusements (airplane Tower) |
| JIS A 4801:1991 | Steel and aluminium alloy venetian blinds |
| JIS S 2041:1995 | Plastics washing basins |
| JIS R 1401:1995 | Non-metallic Protection Tubes For Thermocouples |
| JIS E 3006:1973 | Test Methods For Commercial Frequency Track Circuit Type Automatic Train Stop |
| JIS A 5422:2008 | Fiber Reinforced Cement Sidings |
| JIS A 5540:2008 | Turnbuckle for building |
| JIS L 3203:2002 | Jute felts |
| JIS C 6521:1996 | Test methods of prepreg for multilayer printed wiring boards |
| JIS K 6739:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for drain |
| JIS R 2209:2007 | Testing method for refractoriness-under-load of refractory bricks |
| JIS K 6792:2004 | Polybutene (PB) pipes for water supply |
| JIS D 5301:2006 | Lead-acid starter batteries |
| JIS B 6915:1999 | Process of nitriding and nitrocarburizing of iron and steel |
| JIS R 1613:2002 | Testing Method For Wear Resistance Of Fine Ceramics By Ball-on-disk Method |
| JIS C 5012:1993 | Test methods for printed wiring boards |
| JIS K 6743:2007 | Unplasticized poly (vinyl chloride) (PVC-U) pipe fittings for water supply |
| JIS H 8401:1999 | Methods of thickness measurement for sprayed coatings |
| JIS A 1714:1995 | Inspection Standard Of Amusements (ferris Wheel) |
| JIS C 1611:1995 | Thermistor for temperature measurement |
| JIS C 3005:2000 | Test methods for rubber or plastic insulated wires and cables |
| JIS S 5005:1992 | High boots |
| JIS K 7070:1999 | Testing Method For Chemical Resistance Of Fiber Reinforced Plastics |
| JIS R 1631:1998 | Test method for tensile creep of fine ceramics |
| JIS L 6414:1994 | Temples For Textile Machine |
| JIS S 2037:2007 | Filler pumps for oil burning appliances |
| JIS S 3022:2003 | Oil discharge rubber hoses for oil burning appliances |
| JIS A 1510-2:2001 | Test Method For Door Fittings Of Buildings - Part 2: Fittings For Door |
| JIS C 7606:1985 | Negative-glow lamps |
| JIS C 8367:1997 | Electromechanical pressure type thermostats for household appliances |
| JIS Z 1712:1997 | Oriented polypropylene films for packaging |
| JIS X 6041:1987 | CRT display and keyboard units for business use |
| JIS C 8711:2006 | Secondary Cells And Batteries Containing Alkaline Or Other Non-acid Electrolytes - Secondary Lithium Cells And Batteries For Portable Applications |
| JIS H 7407:1995 | Test method for compressive properties of fiber reinforced metals |
| JIS C 6462:1996 | Test methods of variable capacitors for use in electronic equipment |
| JIS K 7153:2008 | Plastics - Determination Of Linear Dimensions Of Test Specimens |
| JIS R 1645:2002 | Testing Method For Jet Water Erosion Of Fine Ceramics |
| JIS C 8702-1:2003 | Small-sized valve regulated lead-acid batteries Part 1: General requirements, functional characteristics - Methods of test |
| JIS K 7216:1980 | Testing method for brittleness temperature of plastics |
| JIS K 7089:1996 | Testing method for compression after impact properties of carbon fibre reinforced plastics |
| JIS K 7080:1991 | Testing methods for bearing strength of carbon fiber reinforced plastics |
| JIS B 7524:2008 | Feeler gauges |
| JIS C 6435:1989 | Testing methods for low frequency transformers and inductors |
| JIS S 2040:1994 | Large plastics lockable containers for household wares |
| JIS R 1402:1987 | Non-metallic insulating tubes for thermocouples |
| JIS R 2252-1:2007 | Test Method For Abrasion Resistance Of Refractory Products - Part 1: Method At Room Temperature |
| JIS R 6258:2006 | Coated abrasives - Flap wheels with shaft |
| JIS K 7203:1995 | Testing Method For Flexural Properties Of Rigid Plastics |
| JIS K 6788:2004 | Crosslinked polyethylene (PE-X) pipe fittings for water supply |
| JIS Z 4321:1995 | Thallium-activated Sodium Iodide Scintillator For Radiation Detection |
| JIS K 6892:1995 | Testing methods for polytetrafluoroethylene powder for paste extrusion |
| JIS K 6394:2007 | Rubber, Vulcanized Or Thermoplastic - Determination Of Dynamic Properties - General Guidance |
| JIS F 7603:1992 | Small Ships - Tools And Instruments Of Engine Department |
| JIS R 1306:1987 | Porcelain combustion boats for chemical analysis |
| JIS L 7707:1995 | Printing Roller |
| JIS Z 8843:1998 | Industrial Plate Screens |
| JIS F 7602:1989 | Tools And Outfits In Machinery Space |
| JIS B 4115:1998 | Hardmetal Slitting Saws |
| JIS C 7619:1999 | Glow-starters For Fluorescent Lamps - General And Safety Requirements |
| JIS R 6240:2008 | Testing methods of grinding wheels |
| JIS D 0004-2:1998 | Earth-moving Machinery - Scrapers - Standard Form Of Specifications And Testing Methods |
| JIS C 8369:2006 | Photoelectric controls for public lighting |
| JIS K 6766:1977 | Testing methods for polyethylene coatings on metals |
| JIS R 1639-6:2007 | Test Methods Of Properties Of Fine Ceramic Granules - Part 6: Compressive Behavior Of The Granule Beds |
| JIS Z 4817:1995 | Radiation Shielding Lead Bricks |
| JIS A 8421-2:1998 | Earth-moving Machinery - Loaders - Standard Form Of Specifications And Testing Methods |
| JIS C 2107:1999 | Methods Of Test For Pressure-sensitive Adhesive Tapes For Electrical Purposes |
| JIS R 1684:2008 | Fine Ceramics (advanced Ceramics, Advanced Technical Ceramics) - Single Cell Polarization Test Method For Solid Oxide Electrochemical Cell By Current Interruption Technique |
| JIS C 8432:1999 | Fittings Of Unplasticized Polyvinyl Chloride (pvc-u) Conduits |
| JIS R 1601:1995 | Testing method for flexural strength (modulus of rupture) of fine ceramics |
| JIS B 7755:1993 | Impact testing machines for metallic materials - Instrumentation |
| JIS B 9212:2001 | Bush cutter saws |
| JIS A 1192:2005 | Test Method For Tensile Properties Of Fibre Reinforced Polymer (frp) Bars And Grids For Reinforcement Of Concrete |
| JIS C 2141:1992 | Testing methods of ceramic insulators for electrical and electronic applications |
| JIS K 7083:1993 | Testing method for constant-load amplitude tension-tension fatigue of carbon fibre reinforced plastics |
| JIS R 1660-2:2004 | Measurement Method For Dielectric Properties Of Fine Ceramics In Millimetre Wave Frequency Range - Part 2: Open Resonator Method |
| JIS R 2207-1:2007 | Test methods for thermal expansion of refractory products Part 1: Non-contact method |
| JIS K 7074:1988 | Testing methods for flexural properties of carbon fiber reinforced plastics |
| JIS R 6261:2006 | Coated abrasives - Flap discs |
| JIS K 7113:1995 | Testing method for tensile properties of plastics |
| JIS K 6250:2006 | Rubber - General Procedures For Preparing And Conditioning Test Pieces For Physical Test Methods |
| JIS K 7301:1995 | Testing methods for tolylene diisocyanate type prepolymers for thermosetting urethane elastomers |
| JIS R 3646:1997 | Interchangeable conical glass ground joints |
| JIS C 8712:2006 | Safety Requirements For Portable Sealed Secondary Cells, And Batteries Made From Them, For Use In Portable Applications |
| JIS S 2146:1991 | Rubber tubes and polyvinyl chloride hoses with both end convenient joints for gas |
| JIS A 8403-3:1998 | Earth-moving Machinery - Hydraulic Excavators - Testing Methods |
| JIS K 4860:2009 | Safety Fuses For Fireworks - Test Methods |
| JIS C 2820:2008 | Test procedures for determining physical properties of brush materials for electrical machines |
| JIS K 5665:2008 | Traffic Paint |
| JIS Z 0237:2000 | Testing methods of pressure-sensitive adhesive tapes and sheets |
| JIS Z 2290:2004 | General Rules For High-temperature Corrosion Test Of Metallic Materials |
| JIS K 7014:1997 | Fittings and joints for fibre reinforced plastic pipes |
| JIS F 3995:2000 | Discharge Rubber Sleeves For Dredger |
| JIS K 7078:1991 | Testing method for apparent interlaminar shear strength of carbon fiber reinforced plastics by three point loading method |
| JIS A 5508:2005 | Nails |
| JIS B 1801:2009 | Short-pitch transmission precision roller chains and bush chains |
| JIS A 1136:1993 | Method Of Test For Compressive Strength Of Spun Concrete |
| JIS K 6761:2004 | Polyethylene pipes for General Purposes |
| JIS X 6191:1993 | Unpunched Paper Tape For Information Interchange |
| JIS C 3002:1992 | Testing methods of electrical copper and aluminium wires |
| JIS K 7194:1994 | Testing method for resistivity of conductive plastics with a four-point probe array |
| JIS Z 4916:1997 | Test charts for resolution characteristics of X-ray equipment |
| JIS R 1617:2002 | Testing Method For Fracture Toughness Of Fine Ceramics At Elevated Temperature |
| JIS H 8451:2008 | Testing methods for thermal cycle and thermal shock resistance of thermal barrier coatings |
| JIS K 7073:1988 | Testing method for tensile properties of carbon fiber reinforced plastics |
| JIS R 1662:2004 | Testing Method For Fracture Energy Of Fibre-reinforced Ceramic Matrix Composites |
| JIS R 8101:1999 | Seger Cone |
| JIS B 4137:1993 | Pointed diamond dressing tools |
| JIS TR Z0011:2002 | Densified Refuse Derived Fuel |
| JIS B 4133:1983 | Polycrystalline diamond dies for wire drawing |
| JIS K 7087:1996 | Testing methods for tensile creep of carbon fibre reinforced plastics |
| JIS K 7013:1997 | Fibre reinforced plastic pipes |
| JIS E 3005:1973 | Test Methods For Frequency Shift Type Automatic Train Stop |
| JIS C 7522:1974 | Miniature Lamps For Aircraft |
| JIS C 5441:1994 | Testing methods of switches for use in electronic equipment |
| JIS C 2561:1992 | Measuring methods for characteristics of materials of ferrite cores |
| JIS S 3015:2007 | Slide Fasteners |
| JIS R 1307:1995 | Porcelain Combustion Tubes For Chemical Analysis |
| JIS A 5314:1998 | Mortar lining for ductile iron pipes |
| JIS R 2207-2:2007 | Test methods for thermal expansion rate of refractory products Part 2: Contact method using cylinder test piece |
| JIS Z 2284:1998 | Method of elastic-plastic fracture toughness Jic testing for metallic materials in liquid helium |
| JIS C 5202:1990 | Test methods of fixed resistors for electronic equipment |
| JIS C 2522:1999 | Copper-manganese alloy wires, bars and sheets for electrical resistance |
| JIS R 3522:1995 | Glass Bottles For Drug |
| JIS K 7312:1996 | Physical testing methods for molded products of thermosetting polyurethane elastomers |
| JIS K 6760:1995 | Testing Methods For Polyethylenes |
| JIS R 7222:1997 | Test methods for physical properties of graphite materials |
| JIS A 8423-2:1998 | Earth Moving Machinery - Graders - Standard Form Of Specifications And Testing Methods |
| JIS A 1152:2002 | Method For Measuring Carbonation Depth Of Concrete |
| JIS R 6255:2006 | Abrasive discs |
| JIS H 7408:1994 | Test method for fatigue properties of fiber reinforced metals |
| JIS A 9402:2007 | Recycled plastics buffers for parking |
| JIS K 7086:1993 | Testing methods for interlaminar fracture toughness of carbon fibre reinforced plastics |
| JIS K 7015:1998 | Pultruded fibre reinforced plastics |
| JIS S 6009:1995 | Chalk |
| JIS A 8701:1994 | Standard Form Of Specifications And Testing Methods Of Asphalt Finishers |
| JIS S 2032:1995 | Plastics buckets |
| JIS R 1602:1995 | Testing Methods For Elastic Modulus Of High Performance Ceramics |
| JIS L 5116:1983 | Flyer Bobbins |
| JIS R 1609:2003 | Testing Methods For Oxidation Resistance Of Non-oxide Fine Ceramics |
| JIS K 6770:2004 | Crosslinked polyethylene (PE-X) pipe fittings |
| JIS K 7061:1992 | Testing method for charpy impact strength of glass fiber reinforced plastics |
| JIS C 7617-1:2008 | Double-capped Fluorescent Lamps - Part 1: Safety Specifications |
| JIS D 6301:2001 | Standard For Construction And Performance Of Truck Cranes, Wheel Cranes And Crawler Cranes |
| JIS K 4854:2006 | Toy Fireworks - Types And Test Methods |
| JIS R 1676:2007 | Testing Method For Thermal Shock Resistance Of Porous Fine Ceramics |
| JIS K 6774:2005 | Polyethylene pipes for the supply of gaseous fuels |
| JIS A 1716:1995 | Inspection Standard Of Amusements (water Shoot) |
| JIS C 2330:2001 | Polypropylene Films For Electrical Purposes |
| JIS K 2408:1996 | Corrosion Inhibitors For Engine Coolant |
| JIS H 7406:1993 | Test method for flexural properties of fiber reinforced metals |
| JIS R 1685:2009 | Fine Ceramics - Thermocouple Protection Tube For Molten Aluminum |
| JIS C 5311:1994 | Testing methods of power transformers for electronic equipment |
| JIS C 7610:1991 | Low pressure sodium vapour lamps |
| JIS R 1644:2002 | Testing Methods For Elastic Modulus Of Continuous Fiber-reinforced Ceramic Matrix Composites |
| JIS K 6762:2004 | Double wall polyethylene pipes for water supply |
| JIS B 4710:1997 | Groove cutters for woodworking machines |
| JIS B 1012:1985 | Cross recesses for screws |
| JIS K 7221-2:2006 | Rigid Cellular Plastics - Determination Of Flexural Properties - Part 2: Determination Of Flexural Strength And Apparent Flexural Modules Of Elasticity |
| JIS C 7618-1:2008 | Single-capped Fluorescent Lamps - Part 1: Safety Specifications |
| JIS C 1602:1995 | Thermocouples |
| JIS C 7708:1984 | Glass tubing for fluorescent lamps |
| JIS B 7914-2:2007 | Marks For Survey And Boundary - Part 2: Metal Markers |
| JIS Z 2287:2003 | Method for steam oxidation test of boiler tube metallic materials |
| JIS B 4351:1985 | Straight bevel gear generating cutters (type G) |
| JIS T 9215:1986 | Stirrups for lower extremity orthoses |
| JIS K 5410:1990 | Panels for testing of paints |
| JIS A 1107:2002 | Method Of Obtaining And Testing Drilled Cores And Sawed Beams Of Concrete |
| JIS A 1153:2003 | Method Of Accelerated Carbonation Test For Concrete |
| JIS K 9797:2006 | Unplasticized poly (vinyl chloride) (PVC-U) three layer pipes with recycled solid core |
| JIS K 6889:1995 | Polytetrafluoroethylene rods |
| JIS X 6102:1993 | Magnetic Tape Reel For Information Interchange |
| JIS C 2521:1999 | Copper-nickel alloy wires, rolled wires, ribbons and sheets for electrical resistance |
| JIS B 6805:2003 | Rubber hose connection for equipment for welding, cutting and allied processes |
| JIS E 6005:1995 | Railway rolling stock - Automatic train control and automatic train stop device on board - Test methods |
| JIS Z 1527:2002 | Polypropylene band |
| JIS E 3007:2002 | Test methods for continuous induction type automatic train control |
| JIS Z 2282:1996 | Method of cyclic oxidation testing at elevated temperatures for metallic materials |
| JIS K 6793:2004 | Polybutene (PB) pipe fittings for water supply |
| JIS R 1648:2002 | Testing Method For Thermal Shock Resistance Of Fine Ceramics |
| JIS R 6259:2006 | Coated abrasives - Flap wheels with incorporated flanges or separate flanges |
| JIS G 3556:2002 | Industrial woven wire cloth |
| JIS C 6471:1995 | Test methods of copper-clad laminates for flexible printed wiring boards |
| JIS Z 1713:1997 | Cast polypropylene films for packaging |
| JIS R 6244:2005 | Bonded Abrasive Products - Limit Deviations And Run-out Tolerances |
| JIS C 2805:2003 | Crimp-type terminal lugs for copper conductors |
| JIS D 2601:2006 | Automotive parts - Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| JIS C 2806:2003 | Non-insulated crimp-type sleeves for copper conductors |
| JIS B 4131:1998 | Diamond/cbn Products - Diamond Or Cubic Boron Nitride Grinding Wheels |
| JIS R 2206-1:2007 | Testing methods for cold compressive strength of refractory bricks Part 1: Test without packing |
| JIS R 1663:2004 | Testing Method For Flexural Strength Of Continuous Fibre-reinforced Ceramic Matrix Composites |
| JIS K 7076:1991 | Testing methods for compressive properties of carbon fibre reinforced plastics |
| JIS T 7307:2005 | Major amblyoscopes |
| JIS S 6057:1997 | Paper cutters |
| JIS L 3204:2000 | Recovered Fibre Felts |
| JIS H 8646:1991 | Electroless copper platings |
| JIS B 8247:1999 | Formed Head For Pressure Vessel |
| JIS S 2190:1993 | Bands For Rubber Tube |
| JIS S 3008:1981 | Hand sewing needles |
| JIS R 7212:1995 | Testing Methods For Carbon Blocks |
| JIS Z 3283:2006 | Resin flux cored solders |
| JIS A 5556:1993 | Staples |
| JIS K 7220:2006 | Rigid Cellular Plastics - Determination Of Compression Properties |
| JIS C 7523:2000 | Small lamps for household use |
| JIS R 1678:2007 | Test Method For Open Hole Tension Of Continuous Fiber-reinforced Ceramic Matrix Composites At Room Temperature |
| JIS C 2807:2003 | Insulated closed-end connectors |
| JIS K 6891:1995 | Testing methods for polytetrafluoroethylene molding powder |
| JIS K 6330-1:2003 | Testing methods for rubber and plastics hoses Part 1: Methods of measurement of dimensions for hoses and hose assemblies |
| JIS B 4805:1989 | Circular saws with cemented carbide tips |
| JIS C 6481:1996 | Test methods of copper-clad laminates for printed wiring boards |
| JIS R 1643:2002 | Testing Methods For Interlaminar Shear Strength Of Continuous Fiber-reinforced Ceramic Composites |
| JIS C 7516:1992 | Indicator lamps |
| JIS A 4302:2006 | Inspection standard of elevator, escalator and dumbwaiter |
| JIS D 0007:1994 | Standard Form Of Specifications And Testing Methods Of Tire Rollers |
| JIS K 6775-3:2005 | Polyethylene pipe-fittings for the supply of gaseous fuels Part 3: Electrofusion fittings |
| JIS R 6257:2006 | Coated abrasives - Cylindrical sleeves |
| JIS C 7510:2000 | Incandescent lamps for bicycle dynamo lamps |
| JIS R 2252-2:2007 | Test Method For Abrasion Resistance Of Refractory Products - Part 2: Method At Elevated Temperature |
| JIS L 6418:1992 | Take-up strips for looms |
| JIS TS R0002:2008 | Testing Method For Crack Growth Resistance (r-curve) Of Fine Ceramics |
| JIS K 7092:2005 | Test method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen |
| JIS R 3651:1997 | Interchangeable spherical ground glass joints |
| JIS C 2111:2002 | Testing Methods Of Electrical Insulating Papers, Pressboard And Presspaper |
| JIS R 3256:1998 | Measuring methods of surface resistivity for glass substrates |
| JIS B 4711:1991 | Cutter blocks for wood planing |
| JIS A 5541:2003 | Body of turnbuckle for building |
| JIS R 1630:1997 | Test methods for tensile strength of fine ceramic joint |
| JIS K 7118:1995 | General rules for testing fatigue of rigid plastics |
| JIS H 3330:2003 | Plastic covered copper tubes |
| JIS R 1660-1:2004 | Measurement Method For Dielectric Properties Of Fine Ceramics In Millimetre Wave Frequency Range - Part 1: Cutoff Waveguide Method |
| JIS C 0806-6:2006 | Packaging of components for automatic handling Part 6: Bulk case packaging for surface mounting components |
| JIS K 6322:1999 | Ply Construction Conveyor Belts |
| JIS S 5050:1995 | Leather Shoes |
| JIS A 8420-2:1998 | Earth-moving Machinery - Tractors - Standard Form Of Specifications And Testing Methods |
| JIS S 7008:1991 | Table tennis tables |
| JIS A 4714:1995 | Pvc Windows For Interior Installed |
| JIS A 5416:2007 | Autoclaved Lightweight Aerated Concrete Panels |
| JIS K 6780:2003 | Profile wall polyethylene pipes |
| JIS K 6769:2004 | Crosslinked polyethylene (PE-X) pipes |
| JIS R 1632:1998 | Test methods for static bending fatigue of fine ceramics |
| JIS C 7501:2000 | Tungsten filament lamps for general lighting purposes |
| JIS A 1510-1:2001 | Test Method For Door Fittings Of Buildings - Part 1: Locks And Latches |
| JIS E 1203:2007 | Synthetic sleepers - Made from fiber reinforced foamed urethane |
| JIS K 6779:2004 | Polybutene (PB) pipe fittings |
| JIS C 2812:1998 | Mounting rails for devices |
| JIS R 1671:2006 | Testing Method For Water Permeability And Hydraulic Equivalent Diameter Of Porous Fine Ceramics |
| JIS K 9798:2006 | Unplasticized poly (vinyl chloride) (PVC-U) three layer pipes with recycled foamed core |
| JIS K 7084:1993 | Testing method for impact properties of carbon fibre reinforced plastics by instrumented 3-point bending impact test |
| JIS B 1857-1:2001 | Curvilinear toothed synchronous belt drive systems for general power transmission Part 1: Belt |
| JIS K 6932:2007 | Recycled plastics stakes |
| JIS B 7914-1:2007 | Marks For Survey And Boundary - Part 1: Concrete Stakes |
| JIS K 6787:2004 | Crosslinked polyethylene (PE-X) pipes for water supply |
| JIS K 4810:2003 | Testing Methods Of Explosives |
| JIS K 6931:1991 | Reclaimed plastics bars, rods, plates and piles |
| JIS Z 2281:1993 | Test method for continuous oxidation test at elevated temperatures for metallic materials |
| JIS Z 3144:1996 | Routine test of resistance spot and projection welds |
| JIS C 7526:1990 | Standard incandescent lamps of luminous intensity |
| JIS Z 4401:2006 | Plackets Used In Radiation Measurement Instruments |
| JIS B 1456:1989 | Roller chain shaft couplings |
| JIS A 1445:2007 | Testing Methods Of Materials For Ceiling Suspension System |
| JIS R 3420:2006 | Testing Methods For Textile Glass Products |
| JIS K 6373:1995 | Synchronous Belts For Light Duty Power Transmission |
| JIS B 1022:2008 | Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Product grades A and C |
| JIS K 6260:1999 | Testing Methods Of Flex Cracking And Crack Growth For Rubber, Vulcanized Or Thermoplastic (de Mattia) |
| JIS S 6005:2007 | Leads for mechanical pencils |
| JIS Z 4917:1984 | Test Charts For Modulation Transfer Function Of X-ray Equipment |
| JIS S 4001:1985 | Safety match |
| JIS R 1650-1:2002 | Testing Method For Fine Ceramics Thermoelectric Materials - Part 1: Thermoelectric Power |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.